Question about Hawking Wireless-G HWR54G (603992506064) 802.11b/g Wireless Access Point

1 Answer

Port forwarding having a problem downloading off of a site i've used for years. now for some reason it won't download. i was told about port forwarding. could you assist me with this

Posted by on

1 Answer

Re: port forwarding

Why does it have to do with the AP?? do you have java and javascript activated??what changes have you made when that problem occured??

Posted on Jan 11, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

How do I setup port forwarding (UPnP) on and EnGenius ECB-3500? Also this>>

Mar 06, 2014 | EnGenius ECB3500 - wireless access point...

1 Answer

How can i configure aip w505 for att elevate internet, in order to view my qc dvr

You need to enable the virtual server settings on the AIPW505
You also need to allocate a static address to the DVR within the range of the DHCP address range.
Virtual Server Settings - Selects between enabling or disabling port
forwarding the virtual server. (Default: Disable)
? IP Address - Specifies the IP address on the local network to allow external access.
? Port Range - Specifies the port range through which traffic is
? Protocol - Specifies a protocol to use for port forwarding, either TCP,UDP or TCP&UDP.
? Comment - Enter a useful comment to help identify the forwarded
port service on the network..
The manual can be obtained from here

Oct 21, 2012 | ADVANCE Alfa AIP-W505 802.11n/b/g Wireless...

1 Answer

I cannot connect to internet because my computer was remastered and trhe computer does not recognise my router and is telling me to install a driver

I Figure your using a USB lead from your router to your computer. You will need to download the USB interface driver from the Belkin web site. Otherwise, if the router has a ethernet jack, then use a patch cable to your computer (ethernet port) eliminating the need for a driver

Feb 15, 2011 | Belkin (F5D7132)

1 Answer

Hi, my Belkin N Wireless router works in some way fine with both Wired and Wireless connection, but there is a problem, it will only allow me to connect wired to my computer and not to my PlayStation 3......

You may need to change settings in your router to enable your online games to work. Some games need to use specific ports; these ports may be closed due to the router's firewall. Please refer to your game's documentation for the ports required.

Use the following answer to configure these ports in your router.

In order to configure this, you need to know:

- The IP address of the computer or device to have the port forwarded to.

- The port numbers to be used and whether these are TCP or UDP ports

(Note: We recommend you use a computer that has a wired connection to the router.)

Setup steps:

  1. Open a Web Browser on the computer. Type in
  2. In the address bar of the Web Browser type Click Login in the upper right hand corner of the page. The router does not ship with a password, so just click submit.


  1. Click on Virtual Servers under Firewall in the menu on the left


  1. Enter the following information
    • Click Enabled
    • Type a general description of the application i.e.. Remote Desktop
    • Type the port(s) specified by the program manufacture for both of the Inbound port fields
    • Select TCP, UDP, or BOTH for the Type.
    • Private IP address: Enter the IP address of the computer you want grant access too.
    • Type the port(s) specified by the program manufacture for both of the Private port fields.


  1. Click the Apply Changes button

Jan 11, 2011 | Belkin N1 Wireless-N Wireless Router

1 Answer

Portforwarding: Incoming connections on port 80 not possible

try using DMZ plus mode to open all ports to be accessible for that particular application, or specify the application name with the corresponding port on the 2wire modems firewall settings

Nov 22, 2008 | 2wire Wireless-G 802.11g ADSL Gateway

3 Answers

Port help

You can get the message even if you have the ports open. As long as the patch is downloading just ignore it. it may sit in the same spot for a bit but its still transferring. I've never noticed a difference in speed. It will take quite a while for a new install to patch. I'd leave it for a few hours.

May 27, 2008 | Arris SURFboard SBG900 802.11g/b...

1 Answer

Strict NAT?

If you call microsoft, and tell them that your NAT is strict, they will tell you specific ports you will need to forward. (For Free). If you arent sure how to forward ports, call up your routers manuafturer, or send me another message. I have forwarded my ports as well.

Apr 20, 2008 | Belkin Wireless-N Wireless Router with...

1 Answer


You can download drivers for IBM thinkpad R60 here:

Hope it helps


Feb 14, 2008 | Lenovo ThinkPad R60 with Wireless Wide...

1 Answer

How To Make a DMZ

A router normally stops incoming Internet traffic from getting on your network, unless the traffic is in response to one of your computers or when using port forwarding. But instead of discarding the incoming traffic or using port forwarding, you can send incoming traffic to one computer on your network by establishing a "Default DMZ Server". (DMZ = humorous reference to "Demilitarized Zone".) This avoids you having to figure out what ports an Internet application wants ? by throwing all ports open for that computer. For regular network operation, NETGEAR recommends you do not use a DMZ. A computer with DMZ loses firewall protection, and is exposed to exploits from the Internet. If compromised, your own computer can attack the rest your network. Instead of DMZ, use port forwarding, as described in How is Port Forwarding Configured? However, the DMZ server feature is helpful: * When you have a problem connecting to an Internet service. Setting up a DMZ will determine whether a closed port is responsible for the problem. * With some online games and videoconferencing applications that are incompatible with NAT. Follow the procedure under your router model to create a DMZ To Create a DMZ for RP614, MR814, FVS318, FVM318, WGR614 1. Open a Web browser, and type the router's IP address (The router's default IP address is Click Go. 2. Enter the username and password for the router (Default username is admin and password is password). 3. From the browser Main Menu select Advanced > Security. Some routers, such as the MR814, use the WAN Setup Options, page, instead. 4. Enter the server's IP address. 5. Click Apply. To Create a DMZ for FR114P, FR114W, FM114P, FR328S, FVL328 1. Open a Web browser, and type the router's IP address (The router's default IP address is Click Go. 2. Enter the router's username and password (Default username is admin and password is password). 3. From the browser Main Menu select Advanced > Security. 4. Click Rules. 5. Check the box for Default DMZ Server, and enter the server's IP address the corresponding box for the IP Address. 6. Click Apply. To Create a DMZ for RH340, RH348, RT328, RT338, RT311, RT314, RP114, RO318, MR314, DG814 * Going through the GUI and going to Port Forward in the left menu bar. * For RM356: Going through telnet and from the main menu go to menu #15. 1. Open a Web browser, and type the router's IP address (The router's default IP address is Click Go. 2. Enter the router's username and password (Default username admin, password 1234). 3. From the Main Menu of the browser interface, under Advanced, click Port Forwarding to view the port forwarding menu. 4. Enter the IP address of the DMZ server in the corresponding Server IP Address box. 5. Click Apply at the bottom of the menu.

Feb 19, 2006 | NetGear MR314 802.11b

1 Answer

Port Forwarding

To Enable Port Forwarding for MR314 or RP114 1. Type the router's address in an Internet browser's address bar. (By default the router's address is 2. Enter the router's username and password. 3. Click Advanced > Ports on the left menu bar. 4. Enter the first port number in an unused Start Port box. 5. If only one port number is to be forwarded, enter the same number in End Port. To specify a range of ports, enter the last port to be forwarded in the End Port box. 6. Enter the IP address of your local server in the Server IP Address box. 7. Click Apply.

Feb 19, 2006 | NetGear MR314 802.11b

Not finding what you are looking for?
Hawking Wireless-G HWR54G (603992506064) 802.11b/g Wireless Access Point Logo

Related Topics:

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hawking Wireless Access Points Experts

Jazz Boyce
Jazz Boyce

Level 1 Expert

728 Answers


Level 3 Expert

56854 Answers


Level 3 Expert

18258 Answers

Are you a Hawking Wireless Access Point Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides