Question about Televison & Video

4 Answers

Sharper Image Jumbo Universal Remote

Question......
I have a Direct Tv Box HNS SD-HBH and a Sharper Image Jumbo Universal Remote...I went to the Universal Remote Code List of X10Wiki.
I printed all their codes, none of them work. Also, called Sharper Image and they gave me a code of 023...which does not work to operate the Direct Tv box...HELP guys what code do I use.
Here is the codes I tried
629 630 632 633 638 0632 0580 0621 also the 023 (which is a code for an Emerson Tv)....
None of these work on this Jumbo Universal Remote
Good Luck Guru's,
Ken kennyallen98@hotmail.com

Posted by on

  • 5 more comments 
  • Michelle Zapien Jan 11, 2008

    same problem here. Just received a new box from direct tv and now my remote control does not work, have tried all codes and code search, is there any other way to program this?

  • AlabamaGumby Jun 16, 2008

    I just purchased a Sharper Image Jumbo Universal Remote Control for a gift on Father's Day and none of the enclosed codes for Magnavox (tried all for the Phillips brand as well) will work to program the T.V. Does anyone have a suggestion?

  • Anonymous Dec 23, 2008

    I cannot identify codes that work for an RCA LCD TV or the JVC VCR/DVD combo. I checked the remote on other TVs and it does work.

  • JLittle2 Dec 30, 2008

    I have a GE tv and I losty booklet .. does anyone have the codes

  • lsmartinl Jan 06, 2009

    I have the Sharper Image Jumbo Universal Remote and need the codes for a Vizio TV.  Thanks!

  • brycearoni Mar 24, 2009

    I don't know the code(s?) for my "Universal Remote Control Jumbo Remote" either.

  • Anonymous Mar 29, 2014

    do not have the book for remote

×

Ad

4 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I just pirchased a Sharper Image Jumbo universal Remote but i can't find a code for the Pioneer DVR 541H is DVD recorder. Does anyone have this code or  a suggestion?

Posted on Oct 26, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have the glow in the dark jumbo remote and the booklet says the codes for direct TV are:
200-217

pioneer: did you try 080?

I'm having the magnavox problem

Posted on Nov 14, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

You press the code search button and keep pressing the power button until your tv powers off
later i will add a link to get other info.

Posted on Mar 17, 2009

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

I have a one for all universal remote but not the codes to set it up for my t.v. can somebody tell me how to do this? my t.v. is a orion. pleas help me

Posted on Dec 07, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sharper image jumbo remote to work with dish network


I can help you with your Sharper Image Jumbo remote control.

There are two Sharper Image Jumbo Remote Controls: a Sharper Image Jumbo Touch Remote Manual, and a Sharper Image Jumbo Remote Manual. Click the above links to download these remote manuals. The included code lists will give you the correct codes you require.

The Jumbo Touch also has a learn function, while the standard jumbo does not.

I hope that helps.

Apr 04, 2010 | One For All URC-9910 LCD Remote Control

Tip

Sharper Image Jumbo Remote Manual


Sharper Image Jumbo Universal Remote Control Manual

7ccad88.gif


Have you misplaced your Sharper Image Jumbo Universal Remote Control Owners Manual?

Would you like a digital, searchable, pdf version of the Sharper Image Jumbo Universal Remote Control Users Guide?

Follow this link to download a pdf version of the operations manual.

I hope that helps.

on Apr 30, 2010 | Televison & Video

1 Answer

Code for sharper image jumbo tv remote to operate a motorola brand cable box. remote instructions dosn't list it and code search is not successful.


If you go to a website called www.mscustomercare.com. Scroll down to the bottom of the page click on The Sharper Image Universal Jumbo Remote then click download. The manual has the instructions and codes. Good Luck. Source(s): http://mscustomercare.com/

Jan 30, 2010 | Televison & Video

1 Answer

The sharper image jumbo universal remote jvc tv


I found that this website should have all the codes and instructions for most remotes
http://www.xdiv.com/remotes/

Jan 04, 2010 | Televison & Video

1 Answer

Code for sharper image universal jumbo remote


If you send me your email address I will send you the complete download of the manual and all the codes.

Thanks

Al 585@snet.net

May 20, 2009 | Panasonic KX-TG5632 Phone

1 Answer

INSTRUCTIONS NEEDED FOR THE SHARPER IMAGE - JUMBO UNIVERSAL REMOTE


Hello kls1996... programming your remote is rather easy. The easiest way (thanks to The Sharper Image Jumbo Remote being a LEARNING SMART remote) is to do the following:

1 - Point the head of your Sharper Image remote at the head of your Sanyo TV remote (nose to nose so the clear bulbs on each remote are facing each other).

2 - Press the "TV" button on your Sharper Image remote (located in the upper left-hand corner).

3 - Hold the "LEARN" button on your Sharper Image remote (located in the left edge under the volume buttons) until the red light flashes.

4 - Press the key on your Sharper Image remote (e.g. Volume Up or +VOL)... the red light will go solid (indicating that it is waiting for a signal from the other (in your case Sanyo) remote.

5 - Press the key on your other remote (in your case the Sanyo remote) that you want programmed in your new Sharper Image remote... the red light will flash rapidly again.

6 - Repeat step #4 until you have programmed each key.

7 - When done... press the "LEARN" key on your Sharper Image remote. Your Sharper Image remote should be programmed to operate your device (in this case, your Sanyo TV).

NOTE: You can program other devices such as your VCR, DVD, VHS, SAT, CABLE, etc. and not just one device.

Dec 27, 2008 | Televison & Video

1 Answer

I Am trying to program the sharper image jumbo sized universal tv remote.I can;t get the Samsung dvd/vcr combo to except any code listed in the instruction manual


I can help you with your Sharper Image remote control.

There are two Sharper Image Remote Controls: a Sharper Image Jumbo Touch Remote Manual, and a Sharper Image Jumbo Remote Manual.

The Jumbo Touch remote does have a learn function which may be helpful in controlling your Samsung DVD/VCR combo.

I hope that helps.

Sep 12, 2008 | Sharper Image Professional Plus Ionic...

1 Answer

INSTRUCTIONS NEEDED FOR THE SHARPER IMAGE - JUMBO UNIVERSAL REMOTE


..check it out....

http://www.blurtit.com/q717681.html

Feb 17, 2008 | Televison & Video

19 Answers

INSTRUCTIONS NEEDED FOR THE SHARPER IMAGE - JUMBO UNIVERSAL REMOTE


The "auto" mode isn't quite presented correctly in the documentation or posts I've seen...after MUCH trial and error (and about 3 hous) I've been able to set-up ANY infrared device, either by "auto" or learn. (Although maybe not "fully".)

AUTO Method

1. Press & Hold (about 3 sec.) the [DEVICE] button on the JUMBO Remote....llight will stay solid.
2. Now just press the [POWER] button (only) ONCE while pointing at the device...it will start sending codes approximately every second. (Don't keep pressing the power button as instructions indicate.)
3. TIMING IS EVERYTHING HERE. (It may take 5 minutes to find your devices code.)
4. AS SOON AS the power goes off...press the [ENTER] button on the JUNBO Remote.
5. Now pressing the [POWER] button should power up/down the device.

---- any buttons not programmed will have to be handled using the LEARN method ---

LEARN Method

1. Press & Hold (about 3 sec.) the [DEVICE] button on the JUMBO Remote....it'll stay solid.
2. Press the [LEARN] button on the JUMBO Remote. (light will immediately blink rapidly.)
3. Now Press the {NEEDED} button to program. (light will stay solid)
4. Now (1 to 2 inches away) have the ORIGINAL Remote pointed at the JUMBO Remote and press the {DESIRED} button on the ORIGINAL Remote.
5. It blinks rapidly while sending...then a slower steady blink once "LEARNED" correctly.

*** Not all buttons work properly with the "LEARN method". Some you will need to "associate" with an alternate button on the JUMBO Remote. ***

I sincerely hopes this helps anyone & everyone.

Feb 09, 2008 | Televison & Video

12 Answers

Jumbo Universal TV Remote (Sharper Image-Innovage)


sharper image jumbo remote can't get it to program my philips/magnavox tv.

Dec 25, 2007 | One For All URC-9910 LCD Remote Control

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

6,015 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75843 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Marvin
Marvin

Level 3 Expert

82149 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...