Question about TruTech PVS2119 19 in. LCD Television

1 Answer

Remote Troubles My remote does not work for the television (changing volume/channels... etc) but the part of the remote used for the DVD player does work... any suggestions as to how to fix this problem?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert that has over 500 points.

  • Expert
  • 261 Answers
Re: Remote Troubles

Have you tried a universal remote for test? IF that works your problem maybe solved. Also is it the factory remote you are using. Keep me posted and we will go from there. Thank you Jay

Posted on Jan 31, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Panasonic Viera TC-P50G10 is only able to turn on and off . No other buttons on the remote or the set itself will do anything.

These are intermittent problems possibly due to loose contacts in power outlet, power cord, RC jacks, cables, sockets etc. You have to first of all change the input device to something that works and see. If problem persists, some qualified service technician has to look inside for dry solder, leaky or dry capacitors etc.

Aug 04, 2012 | Panasonic Flat Panel Televisions

1 Answer

I have a philips universal remote and i need the code for my tv which is a sv2000 with the dvd player built in

Hello crystal and welcome to FixYa. I think you were searching for the remote codes for a SV2000 TV/DVD Combo. Generally speaking TV/DVD Combos do not have a traditional codeset but instead use a DVD one instead. Follow these steps below.

Search the TV codes Using AV1 or AV2

Press and hold Mute and Select for two blinks

Enter 9 11

Enter 2

Press and release Volume Up

Press and release Channel Up until you hear the volume change

Next after hearing the volume change press Select to lock in the code

You should be all set. I hope this solution works out for you and good luck.

Apr 22, 2011 | Flat Panel Televisions

2 Answers

I have a sharp 52". the remote will adjust the volume but, i can't change the channel. Help? Out of nowhere I could no longer change the channel. The Mrs is getting tired of standing next to the tv so I...

Sometimes, if certain remote control keys are used over and over again the rubber on the bottom of the buttons wears off onto the inside contacts, breaking the electrical connection. This is common on power and channel keys, especially. If you can get the remote opened up, you can clean the contacts with a cloth and it might help. Otherwise, it may be worth buying a universal remote. Good luck! Der Strom

Apr 05, 2010 | Sharp Aquos LC-46D62U 46 in. LCD HDTV

1 Answer

Remote does not work

Did you drop the remote lately my dog loves the plastic and knarls and slobers on them. Go buy a cheap replacement and try it

Mar 24, 2010 | LG 37LG30 37 in. LCD HDTV

1 Answer

Hi, remote not working and unable to change channels using tv buttons. other buttons on tv - volume etc are working fine

if your remote is for cable, then you have to push the cable button, then change channels. volume will work only on tv mode.

Oct 06, 2009 | Sampo PME-50X7 50 in. HD-Ready Plasma...

1 Answer

Can not adjust volume

Is it the original remote that came with the TV? If you're using a universal remote or one that came with your audio receiver or DVD player or whatever then you may have accidentally switched modes to audio or something. Be sure the TV mode is selected.

Was it working previously?

Jul 21, 2009 | iLO 3200 32 in. LCD Television

4 Answers

Vizio remote control not working

Hi, I had the same problem. My vizio remote for my 42 inch 2 month old vizio also seemed to stop working. Here's what I did: My vizio remote (like most remote's nowadays) was designed for multiple components (tv, dvd, vcr, etc). All you need to do to make the remote work again is set it back to tv. Now, the confusing thing about vizio remotes is that they actually have TWO places where you can switch the remote to the appliance you want to control. One is on top of the remote, the other is on the BOTTOM. Switch it back to TV using the BOTTOM. My remote had stopped working because I had inadvently switched it to another component on the BOTTOM component switch.

Mar 14, 2009 | Vizio P2 42 in. HD-Ready Plasma Television

1 Answer

How to program ilo TV w/universal remote to play DVD

I Believe You Can Go To Channel 2 And Right Below Those Channels Are The 3 Video Channels Turn On Your Dvd Player And Go Through Them. If That Doesn't Work Try Looking At The Buttons On Your Tv For A Tv Video. Make Sure You Dont Have A Tv Video Button On Your Remote If You Do Then Just Click It Till You Find The Appropriate Video Channel.

Jan 05, 2009 | iLO 3200 32 in. LCD Television

3 Answers

Remote doesn't work

unplug from the wall socket and plug back in and try

Jan 17, 2008 | Mintek DTV-373-D 37 in. LCD HDTV

Not finding what you are looking for?
TruTech PVS2119 19 in. LCD Television Logo

Related Topics:

48 people viewed this question

Ask a Question

Usually answered in minutes!

Top TruTech Flat Panel Televisions Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Dave Naylor
Dave Naylor

Level 3 Expert

834 Answers

The Knight
The Knight

Level 3 Expert

66578 Answers

Are you a TruTech Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides