Question about Vivitar ViviCam X327 Digital Camera

1 Answer

The disk is out of date for camer x327 i cannot start it up

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • Vivitar Master
  • 102,366 Answers

You can download the Vivitar software here. Click on the "Vivitar Experience Software" link.
You don't need the Vivitar software to use your camera. The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.

Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program, such as Picasa.

Posted on Mar 02, 2012

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you change the date and time


Press the MENU button. Use cursor-left/right to select the wrench icon. Use cursor-up/down to select "Date." Select "Set Date."

Use cursor-left/right to move between fields, cursor-up-down to change their values. Press MENU when done.

May 09, 2011 | Vivitar ViviCam X327 Digital Camera

1 Answer

Please...which is the wrench button? vivitar x327 trying to set up date/time. for the 1st time


The "wrench" is NOT a button, it is an icon in the menu.

Press the MENU button. Press the Right/Left button to select the "WRENCH" icon The Setup menu appears in the center of the LCD. 3. Press the Up/Down buttons to select the Date option in the Setup menu. Press the MENU button. Press the Up/Down buttons to select a Date option from the Menu that appears: On selecting "On" the date will appear on the photo once it is taken. • On selecting "Off" no date will appear on the photo. • On selecting "Set Date" the Set Date settings screen will appear. You will be able to • change the date settings that will appear on the photo once it is taken. To Set the date: Press the Up/Down button to enter Set date option. 1. Press the MENU button. 2. Press the Right/Left button to select and highlight the Year, Month, Day, Hour, Minute, 3. Second and Date Format type. Press the Up/Down button to set the Date, time and

May 07, 2011 | Vivitar ViviCam X327 Digital Camera

1 Answer

I have been told my vivitar vivicam x327 has been discontinued. Is there a SD disk that i can buy for it still?


You can use SD cards or SDHC cards up to 8GB in size. SD and SDHC cards are available at almost any department, electronics, or office-supply store. Many drugstores and supermarkets also carry them.

Mar 18, 2011 | Vivitar ViviCam X327 Digital Camera

1 Answer

I cant see any light from the projector bulb. it is like it is trying to boot up but does not start, perhaps the bulb is gone it is a CP X327 type


what are the state of the leds on the top cover as it tries to start up, and what finally do the leds indicate when it gives up trying

Mar 06, 2011 | Hitachi CP-X327 Multimedia Projector

1 Answer

How do i set the date on a Vivitar ViviCam X327 digital camera


Press the MENU button. Press left/right to select the wrench icon. Press up/down to select "Date" and press the MENU button. Use left/right to move between the fields, up/down to change them. Press MENU when done.

Mar 03, 2011 | Vivitar Cameras

1 Answer

How do iset the time om my camera


The setup instructions begin on page 19 of the manual. The date and time command is discussed on page 23.

Jan 25, 2011 | Vivitar ViviCam X327 Digital Camera

1 Answer

I need a manual for my vivitar X327 digital camera. Did not come with one and disk provided will not download.Cant seem to find a website I can downlooad for free.


Hi,

You can download and print the instruction manual in PDF format by clicking this link.

Adobe PDF Reader is required to view this manual.

b998fa0.png


Hope this helps. Thanks for using FixYa.

Oct 10, 2010 | Vivitar ViviCam X327 Digital Camera

1 Answer

I would like to know how to set or change the date on my Vivitar ViviCam x327 camera.


The Date command is in the Setup menu. The Setup section begins on page 19 of the manual. You'll have to skip to page 23 for details on setting the date.

Aug 24, 2010 | Vivitar ViviCam X327 Digital Camera

1 Answer

How do i change date on my vivitar x327 vivi cam


Press the MENU button. Use left/right to select the wrench icon. Use up/down to select the "Date" option. Press the MENU button. Use up/down to select "Set date." Press the MENU button. Use left/right to move from field to field, up/down to change the numbers. Press the MENU button to confirm, save the changes, and exit.

This is mostly from page 23 of the manual. If you've misplaced your manual, you can download one from the manufacturer's web site at
http://vivitar.com/files_products/10/ViviCam%20X327%20User%20Manual.pdf

Aug 05, 2010 | Vivitar ViviCam X327 Digital Camera

1 Answer

How to change the date setting on my camera


1. Press the Menu button.

2. Press the Right/Left buttons to select the wrench.

3. Press the Up/Down buttons to select the Date option in the Setup menu.

4. Press the Menu button.

5. Press the Right/Left buttons to press and highlight the various components. Press Up/Down to set date, time, and format.

6. Press the Menu button to confirm, save, and exit.

Jan 27, 2010 | Vivitar ViviCam X327 Digital Camera

Not finding what you are looking for?
Vivitar ViviCam X327 Digital Camera Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vivitar Cameras Experts

kakima

Level 3 Expert

102366 Answers

Tony

Level 3 Expert

2600 Answers

Greg Cann
Greg Cann

Level 3 Expert

1114 Answers

Are you a Vivitar Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...