Question about Mitsubishi WS-65909 65" Rear Projection Television

1 Answer

Wont turn on

Push the power button and the green light comes on, then turns off it about 3 seconds.

Posted by on

  • dandan46 Feb 13, 2008

    we have pressed the reset button with no help, we have held the menu button for over the suggested more than 8 seconds, still does not help, the green light will flash for a short time frame,then stop flashing. screen will not power up. have checked the AC , it is good also. please help with this issue.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

I bought the mitsubishi black diamond gray 65819 is under warranty and had same problem , turns off like after 2seconds ,it can be fixed people but u need a sears tech, I had one come out and was told they no longer can get the part ,but he had to take it to repair it and yes its was a steal for me ,depending where u live the cost for me would have been $350 for part,$200 labor its the board that the power cord is connected to in tv... I live in s.a. texas , the unit that set up the service is 9905 ,the repair unit is just down the street from them off culebra so if u get tech says cant repair it this one does,it helps if u have the warranty or protection agreement

Posted on Mar 26, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Printer does not print


Instructions
    • 1 Switch the Canon MX310 off using the "Power" button, then push the "Stop/Reset" button on the control panel. Hold the button down for about five seconds.
    • 2 Push the "Power" button while holding "Stop/Reset." Hold down both buttons for five seconds.
    • 3 Release "Stop/Reset" while holding down the "Power" button.
    • 4 Push "Stop/Reset" twice while continuing to hold the "Power" button. Release the "Power" button. The power light will turn green.
    • 5 Once the light is steady green, push "Stop/Reset." Wait about three seconds and push it again. Wait three more seconds and push it one final time, for a total of three times. The power light will turn orange.
    • 6 Push the "Power" button, then lift the MX310 cover open.
    • 7 Remove both ink cartridges and wait 10 seconds. Replace the cartridges and close the MX310 cover. Wait 30 seconds.
    • 8 Push the "Power" button. Wait a few seconds to allow the printer to fully power down, then switch the Canon MX310 back on using the "Power" button.

Jul 23, 2014 | Canon PIXMA MX310 All-In-One Printer

2 Answers

Mitsubishi VS-70707 rear projection TV


DOES THE LIGHT BLINK IN A PARTICULAR PATTERN?

Jan 31, 2008 | Mitsubishi WS-55807 TV

1 Answer

Tv wont power up?


could be buttons,unplug them and try remote, or the convergence ics are bad

http://www.shopjimmy.com/

Aug 25, 2012 | Mitsubishi WS-55807 TV

1 Answer

Our CAL232 TV will not turn on. When pressing the power button, you can see a red light and a green light, but the screen doesn't start up as normal. The TV then tries again after about 20 seconds, but...


Hello,

My LOEWE CAL 232 will not power up. When the power button is pressed, the monitor turns on, with the LOEWE on the monitor, then the TV continues with the previous activity (antenna, DVD, VCR etc.). Now all that happens is

1. the red light comes on

2.after about 1 second the green light turns on for about 12 seconds

3. the the green light turns off for about 1 second

4. then the green light turns on again for about 12 seconds

and this continues until the power button is pressed to turn the TV off. During this time, the monitor does not turn on and the only sound I hear seems to eminate from the power button.

Any thoughts?

Oct 19, 2010 | Loewe CAL232 TV

2 Answers

My frigidaire dishwasher model #fghd2433kf1


It is in a delay wash mode.
Disconnect power for 60 seconds.
Re-connect power.
Press the Cancel button.
Press the regular wash cycle and start the dw.

Jul 17, 2010 | Frigidaire Dishwashers

2 Answers

TV won't turn on...after hitting the power button, the light turn green for about 3 seconds, then turns red and the screen never come on. Pressing the power button again turns the whole thing off (no...


It seems that your unit has some sort of PSU fault, or a problem that is shutting down the Power Supply Unit, PSU. This happens so that no further damage, and possible fire will occur.
You need to take the unit to a reputable service centre/man and ask for a firm "Quote" for the work to be done.

Jan 22, 2010 | NEC PlasmaSync 42MP2 42 in. Television

1 Answer

Plasma wont turn


unplug it and leave it off for 10 mins
then plug it back in.

Aug 18, 2009 | Televison & Video

1 Answer

Pixma ip 3000 power on all the time no functions. cannon


1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not, press the Power button once more.
8. Your printer should respond as normal.


Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Nov 29, 2008 | Canon PIXMA iP3000 InkJet Photo Printer

2 Answers

Akai tv


The power supply most likely failed on your LCD.
How old is your LCD?

Jul 26, 2008 | Akai LCT3201TD 32 in. LCD Television

Not finding what you are looking for?
Mitsubishi WS-65909 65" Rear Projection Television Logo

101 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1229 Answers

The Knight
The Knight

Level 3 Expert

75417 Answers

Jaime Hernandez

Level 3 Expert

2336 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...