Question about HP PSC 1315 All-In-One InkJet Printer

1 Answer

Printing probelm of hp psc1310 series version 4.2.0

After giving the print command the printer prints only 3 to4 lines and thenrest of the matter dosnt get printed. it stucks there.
please sole this problem.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has answered 1,000 questions.

  • Master
  • 1,665 Answers
Re: printing probelm of hp psc1310 series version 4.2.0

The connection of the black plastic gear that moves the shaft must be fault. As HP doesnt provide spare part (gear) for this model try to use a good glue to repair the connection of gear and shaft. I did it before 6-7 monthts and still is working.
To have access there you must remove cover unscrewing 4 screws with a special screwdriver (asteroid).
The glue i used named "super power" contains cyanoacrilate and has good results in wood, many plastics and metals.
Good Luck !

Posted on Jan 10, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer



1. A temporary scanner start up error.

2. This can also be the shutter tab on the print cartridge. Replace the toner cartridge.

3. Replace the scanner ***'y.

4. Replace the engine board.


Sep 12, 2012 | HP LaserJet 2300 Printer

1 Answer

Double printing sometimes-HP DesignJet 500-800 series

When was the last time the heads were aligned? If that's not it, it's the belt.

Dec 17, 2009 | HP Printers & Copiers

2 Answers

How do i set ip address for new jet direct card on hp 4600 dn

Go here for the manual cause it's a bit hard to walkthrough. When the printer is on and ready, you want to click the menu button and scroll though to the configuration menu -> i/o menu. You can print a configuration age to see what the current address of the jetdirect card is. If you're comfortable with command line, you cna use telnet to connect to the jetdirect card and configure it that way.

Oct 05, 2009 | Printers & Copiers

4 Answers

How to set a printer to print only 1 copy no matter what # is put

You cannot do it -- when you request '3' copies, the computer sends 3 times as much text & commands to the printer. So, the printer cannot tell when the 2nd and 3rd copy begins.

Sep 14, 2009 | HP LaserJet 1200 Printer

1 Answer

My printer hp deskjet 3550 not working properly

my printer did not take the printing job. I wnt to cancel the job but it is not cancell lsat one job is still pending. If acctionally take the print firt two line is printing the rest of the matter is pending and that job is not able to cancel . I have hp diagnostic utility but it is also not working to release the printing que. kindly do needful to solve this problem

Jun 21, 2009 | HP DeskJet 3550 InkJet Printer

1 Answer

My printer do not print any file

I usually face the following problem while giving printing command to my printer:\r\n
1. On clicking print from file meno the printer does not print and the yellow light upwards starts blinking.
2. Reinstalled the printer after inserted the Printer Software *C6464-10018* v 41 *MacOS 8.1*USB
but printing did not start from this even.
3. sometimes earlier I experienced that only 2-3 lines get printed and after that the upper yellow light again started blinking.
4.Some times the printer goes on sucking papers and prints as the signs of playing cards or some other abnormal shapes lining etc.
Please be kind enough to solve my all such problem and if possible point out step by step action to be taken by me during such an eventuality at a later stage also.


Jun 12, 2009 | HP DeskJet 640c InkJet Printer

1 Answer

LaserJet 4 Plus just prints one line meaningless

dear friend

you must be using via lpt cable

just tighten the cable and/or replace the cable


Apr 10, 2009 | HP LaserJet 4 plus Printer

6 Answers

Not printing in foxpro 2.6 dos to hp laser jet 1020

You write "type the above line at command prompt". I dont't know Where exactly to write? Can you tell me!

Feb 05, 2009 | HP PSC 1610 All-In-One InkJet Printer

1 Answer

Printer is not printing

The error is a loss of laser beam detect error. Your problem is the laser scanner has burned out. The replacement is easy to accomplish. You simply have to remove the full top cover (3 screws and 1 clip near front right corner). You'll need to remove the side cover first. Once the covers are removed, look for a large black box (about 4" x 6") held in place by 4 screws. The part is available from Dale at Seattle Platen, 1-800-221-2388. Ask for a refurbished on exchange.

Hope that helps you.

Aug 27, 2008 | HP LaserJet 4 plus Printer

Not finding what you are looking for?
HP PSC 1315 All-In-One InkJet Printer Logo

Related Topics:

56 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Printers & Copiers Experts


Level 3 Expert

93922 Answers


Level 3 Expert

7983 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a HP Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides