My Base doesn'nt charge the phone all the way,and the phone will blank out no calls can be made

It is highly likely that your battery pack needs replacing. If you have had it for more than a year and use it often then it is quite possible. You can buy a new one at radio shack online or search for one similar on ebay. Price is about 10 pounds though.



If you have more than one of these phones it may be worth while buying more than one as it will save you postage and might get you a discount.

Hope this was helpful

Check your connections on hand set and base. Wiggle the handset on base to see if handset starts charging... If it does.. clean your connections or you have loose solder connections either in hand set or Base Unit.. Give that a try..

Chris

If it's one of the multi-phone units, it needs to be placed in the base/main unit charging cradle to allow it to reprogram to that base.

The locator? Service on a 7684 doesn't come from the base, it comes from the cell station. If it's registered properly, the base doesn't do anything but charge the handset.

Check with your Panasonic dealer or system administrator.

Carl

I would first try doing a soft reset by pushing and holding both the power button and the home button at the same time, continue holding until the apple logo reappears, then wait to see if it boots up. If that doesn't work, try doing a restore by plugging into PC and clicking on restore in iTunes on your PC. If this doesn't resolve your problem, call 1-800-MYIPHONE to set up an appointment in an Apple store so a tech can repair your device. Hope this helps!

I am so tired of all the answers that don't help by repeating standard answers that you already know won't work or giving directions for a totally different product. The fix here is simple but not easy. It's either a bad charging/battery connection, a bad battery or both. Low power will cause the exact problem asked here.

As the phones get older, and I'm specifically talking about Panasonic cordless KX-TG563x but this may be true of other rechargeable devices, the metal contacts for charging and battery do not make a good connection like they used to. They may look perfectly fine and free of corrosion but are not actually making a good connection.

Symptoms include the phone getting hot while charging and not holding a good charge. The phone may show 3 bars of charge but still blank out like the battery is dying. With these Panasonic phones, weak battery will cause the phone to unregister and will give false charge level readings in the display. If your phone gets hot when charging, this is most likely your problem.

I had this problem with several handsets and used contact cleaner on the charge base, the phone contacts, the battery contacts inside the phone and on the battery itself. It fixed all the registration, heating and charging problems. I had one stubborn handset I had to clean multiple times but it's now working like new as well. I used DeoxIt contact cleaner from Caig, bought it on eBay. Great stuff. If repeated cleaning of the contacts with a good contact cleaner does not fix the phone, replace your battery. Use contact cleaner on your new battery for best connection. Ebay is a good source for replacement batteries as
well. Good luck!

Same issue here. Have you checked the battery? I found out that on mine the battery was leaking and corroding the contacts. Need to call Panasonic to find out if they can do something (about 5 month old phone)

It's not charging the battery, clean the contacts on the base, put it on another base to see if it says CHARGING.

Verify that you have power to the base.

Battery might be bad. Try it in another handset.

put the other handset on the base

ted

smash it into little pieces! That's what I'm doing with mine.