Question about HP Compaq nc6120 Notebook

2 Answers

Hp nc6120 will not start power led blinks 7 times and turns it self off

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 4 Answers

Simple.allow someone to dismantle everything for you( a specialist or a pc technician will do)check the cpu, fans and heatsink,clean them and apply thermal compound.assemble all the parts together after cleaning then reboot.problem solved!if it doesnt work,check the laptop battery,power supply as well as the hard drive,that might be the bottleneck of that problem.

Posted on Dec 20, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 206 Answers

Something wrong with the CPU

Posted on Nov 19, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i fix a problem of green power led continuously blinking in Hp compaq nc6320 laptop even when the battery is removed and the motherboard is outside the case?


HP Notebook PCs - Troubleshooting LED Blink Codes or ...

h20564.www2.hp.com/hpsc/doc/public/display?...na...

Hewlett?PackardHP Notebook PCs - Troubleshooting LED Blink Codes or Beep Codes During Startup or Boot ... HP Pavilion and Compaq Presario notebook computers built in 2009 or later use blinking LEDS to identify ... Press the power button to turn on the computer, and look for blinking LED lights on the keyboard. ... Continuous blink.Missing: green ‎nc6320

HP Notebook PCs - Computer Does Not Start and Emits an ...

support.hp.com/us-en/document/c01732674
This document pertains to HP and Compaq notebook computers. .... light next to thepower socket or the light on the AC power adapter and note its condition: off, blinking, or constantly on. ... Battery power LED off, and Caps Lock/Num Lock off.Missing: green ‎nc6320

HP 6735s won't boot, power LED blinks 7 times - HP ...


Feb 03, 2016 | HP Computers & Internet

1 Answer

Reset hp 4500


Canon ip 4500 printer reset proses:
1. Condition Canon IP4500 printer is dead,
2. Press and hold the resume button on Canon IP4500,
3. Press and hold the power button on Canon IP4500,
4. Release the resume button on Canon IP4500,
5. Press the resume button 2 times,
6. Release the power button,
7. Green Led on Canon IP4500 will blink,
8. Wait until the green led is not blinking,
9. Press the resume button 4 times,
10. turn off the printer
Thank you

Jun 01, 2013 | Office Equipment & Supplies

2 Answers

My laptop screen is black and caps lock and scroll key are flashing


That is a security configuration on HP Laptops, depending on the way they blink is the problem your machine has.

Here is the web page where this info is posted, in case you need more info, hope this helps you to determain.

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01443366&lc=en&dlc=en&cc=uk&lang=en&rule=26781&product=3816592
This document pertains to HP Notebook PCs with the HP Unified Extensible Firmware Interface (UEFI) beginning in late-2008. On startup, you may see a blank screen. If the diagnostic utilities detect a specific problem with hardware components, the fan turns on, but the screen remains blank. To help identify the cause of the problem, various LED lights on the keyboard blink a series of codes. The diagnostic utilities use the LEDs near the Num Lock or Caps Lock keys to blink a series of error codes. At the end of the series the blinking stops. The pattern of blinks will occur any time you attempt to start the computer until the error is resolved. Battery power LED blinks The Battery power LED indicates the condition of the power supply. When starting the computer, or when the computer is in operation, use the chart to identify the power condition. Battery Power LED Component Tested Error Condition Battery power LED off, and Caps Lock/Num Lock off Battery or AC Adapter AC adapter not connected or failure

Battery low charge or failure Battery power LED blinking Battery Insufficient charge on the battery When new computer is used for first time, the white LED light for the AC power connector blinks. Battery is still in "Shipping Mode", the light continues to blink even when AC power is connected.

To resolve, turn off notebook, connect AC power and allow battery to charge for at least 30 minutes, then start computer. LEDs near Caps Lock and Number Lock keys blink when starting notebook The LED lights near the Caps Lock and Num Lock keys will blink if an error is detected during the start up process. The LEDs will blink a number of times in a sequence and then stop. The number of blinks in the sequence indicates what component caused an error when it was being tested during start up. If the LEDs stop blinking and the computer does not start, you can press the power button again to repeat the tests. Count the number of blinks, and use the chart to identify the error condition. Knowing the number of blinks is helpful when you contact an HP support agent for technical help. Caps Lock/Num Lock LED Component Tested Error Condition LEDs blink 1 time CPU CPU not functional LEDs blink 2 times BIOS BIOS corruption failure LEDs blink 3 times Memory Module error not functional LEDs blink 4 times Graphics Graphics controller not functional LEDs blink 5 times System board General system board failure LEDs blink 6 times BIOS BIOS authentication failure

Dec 01, 2011 | HP Computers & Internet

1 Answer

On My Dv5-1125nr both the caps lock and num lock keeps blinking when i turn it on. It's wont boot at all. What kind of hardware problem is this?


First remove the battery and power cord for about a minute. Then plug back in and see if that helps. Otherwise please read the following:

LEDs near Caps Lock and Number Lock keys blink when starting notebook The LED lights near the Caps Lock and Num Lock keys will blink if an error is detected during the start up process. The LEDs will blink a number of times in a sequence and then stop. The number of blinks in the sequence indicates what component caused an error when it was being tested during start up. If the LEDs stop blinking and the computer does not start, you can press the power button again to repeat the tests. Count the number of blinks, and use the chart to identify the error condition. Knowing the number of blinks is helpful when you contact an HP support agent for technical help. Caps Lock/Num Lock LED Component Tested Error Condition LEDs blink 1 time CPU CPU not functional LEDs blink 2 times BIOS BIOS corruption failure LEDs blink 3 times Memory Module error not functional LEDs blink 4 times Graphics Graphics controller not functional LEDs blink 5 times System board General system board failure LEDs blink 6 times BIOS BIOS authentication failure

Aug 03, 2011 | HP Pavilion dv5-1125nr Notebook

1 Answer

Im having a problem with my TV turning off and the standby button flashing 7 times, after it shut off. What can I do.


hi,
Blinking led in sony tv is its self dioganising function. 7 blinks by it means the horizontal output voltage increased above 33k.
You have to check the power supply stage of you tv. Normally in sony tv dry soldering can happend in the power supply stage. It will lead to unregulated voltage output from the power supply. Resolder all the points in the power supply section it will solve your problem.
ok

Jul 07, 2011 | Sony FD Trinitron WEGA KV-32HS500 32" TV

1 Answer

Power indicator light blinks-7 times. will a new power supply fix it


Physically disconnect the SU board and the SD board. (See precaution # 5)

Plug in the TV and turn it on.

Does the TV shut down and the power LED

blink 7 times?

Yes

No

Replace the Panel and the SU board.

(See precaution #3)

Reconnect the SD board only.

(See precaution # 5)

Plug in the TV and turn it on.

Yes

No

With the SU board and the SD board still disconnected, remove connectors SC2 and SC20 from the SC board (See precaution # 6)

Plug in the TV and turn it on.

Disconnect the SD board and reconnect the SU board. (See precaution # 5)

Plug in the TV and turn it on.

Yes

No

Replace the Panel, SD, and SU board.

(See precaution #3)

Replace the Panel and the SD board.

(See precaution #3)

Replace the SC board.

(See precaution #3)

No

Replace the D board.

(See precaution #3)

Does the TV shut down and the power LED

blink 7 times?

Does the TV shut down and the power LED

blink 7 times?

Does the TV shut down and the power LED
blink 7
There is a sequence that you have to check to figure out which board is bad,

Feb 16, 2011 | Panasonic TH-42PZ700U 42 in. Plasma...

2 Answers

TV will not turn on. Power light blinks 7 times, then pauses, blinks 7 times again. What could the problem be?


If you are a DIY then you will need to try to unplug the SD board and reconnect and try again, if it stills shutdown with 7 blinks then the SD board is bad and maybe the

Physically disconnect the SU board and the SD board. (See precaution # 5)

Plug in the TV and turn it on.

Does the TV shut down and the power LED

blink 7 times?

Yes

No

Replace the Panel and the SU board.

(See precaution #3)

Reconnect the SD board only.

(See precaution # 5)

Plug in the TV and turn it on.

Yes

No

With the SU board and the SD board still disconnected, remove connectors SC2 and SC20 from the SC board (See precaution # 6)

Plug in the TV and turn it on.

Disconnect the SD board and reconnect the SU board. (See precaution # 5)

Plug in the TV and turn it on.

Yes

No

Replace the Panel, SD, and SU board.

(See precaution #3)

Replace the Panel and the SD board.

(See precaution #3)

Replace the SC board.

(See precaution #3)

No

Replace the D board.

(See precaution #3)

Does the TV shut down and the power LED

blink 7 times?

Does the TV shut down and the power LED
blink 7 times?

Jan 11, 2011 | Panasonic TH-37PX50U 37 in. HD-Ready...

1 Answer

Compaq nc6120 will not turn on, flash blinks, power is on


This is a known issue with the nc6xxx series. The problem is with the Maxim chip that needs to be resoldered. Take a look at this repair manual, it has all the instructions you'll need to do a Maxim chip resolder http://ebooksandtutorials.com/toshiba-m35-hp-nc6000-laptop-repair-manual

Nov 22, 2010 | HP Compaq nc6120 Notebook

3 Answers

TV NO TURN ON


Hello erraez, I would suggest that you first get a schematic for this set (either call the manufacture or go to a sams photofact site and order one). It sounds like you have a powersupply problem, the only way to make sure is to have someone or yourself check the power supply levels to determine what is happening. You will also need a multimeter for this task. If you do not feel comfortable doing this you can lok for a shop on fixya.com or find one in your neighborhood that will look at it and give you an estimate on what is wrong.

Sep 08, 2007 | Mitsubishi WD-52525 52" Rear Projection...

Not finding what you are looking for?
HP Compaq nc6120 Notebook Logo

Related Topics:

1,086 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18389 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Tony

Level 3 Expert

2600 Answers

Are you a HP Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...