Question about Video Game Consoles & Games

6 Answers

I cannot get my Orb bluetooth headset to work. and yes before you say it im not a dohnut i did follow the instructions as they are put out but when scanning for bluetooth devices on my ps3 it scans forever.

Posted by on

Ad

6 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I figured it out!!! you have to do the Scanning firstly then when you are asked to hold down the P button for 5 seconds and it turns RED immediately open the microphone whilst it is still RED and it will work (hopefully) then it will be registered with your ps3! (hopefully)

Good luck :)

Posted on Dec 30, 2009

  • chayward69 Feb 14, 2011

    how do you turn the orb headset on ,ive done wot its says in instructions but cant get it to work and its doing my head in pls help

  • jamielow Mar 12, 2011

    how do we know when the orb is charged or should it work straight away

×

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 132 Answers

Hello,

From what you say it looks like the problem lies on the Orb bluetooth headset not being in pairing mode.

Try this:

Pairing Problems:

  • If the PS3 cannot locate your headset, make sure that your headset is in pairing mode before you start scanning. The headset instructions will tell you how to set yours to pairing mode.
  • If your headset is missing from the device menu after you re-start your PS3, you will have to pair again. Many headsets will only "remember" one device at a time, so you may have to register again after using your headset with a phone.
  • If your headset appears on the Audio Device menu but is "grayed out" or not selectable, it is not connected. Make sure the headset is charged, and that it is on in standby. I should connect automatically when the Audio Device menu is selected. Tap the call button on the headset if it does not connect, or click on the Connect Bluetooth tab on screen.
  • Make sure no other Bluetooth devices are in use nearby.
Hope it helped.

Posted on Nov 18, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Can enyone help me with my Ps3 Bluetooth (orb), i cannot connect it to my Ps3, and i dont have a manuel for my bluetooth.
Please help me !

Posted on Jun 27, 2010

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

0000 is the pass key ;)

Posted on Mar 13, 2010

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Where did you purchase your ORB and are you still having problems with it?

Posted on Dec 29, 2010

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Wats the pass key

Posted on Jan 07, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a nokia n72 and it is not connecting with nokia bh-104 what must i do


hello,please kindly follow the instructions below, 1.put on the bluetooth headset and as well the nokia N72 phones bluetooth
2.then use the nokia N72 to search the bluetooth,if found you would be asked to enter a passkey,then enter 0000 or 1111 there your headset and nokia N72 has been paired,there you can start to make good use of your device.
3.if your nokia does not pair the headset,then follow the steps below. MENU>SETTINGS>PHONE SETTINGS>CONNECTIONS>BLUETOOTH>OPTIONS>SHOW AVAILABLE TO ALL>CLICK YES AND SAVE. you are better after that to enjoy your device.
take care.

Jul 31, 2011 | Nokia N72 Cellular Phone

Tip

How to Pair or Connect the Plantronics 510 Bluetooth Headset to your Bluetooth...


001450c.jpg

1. Turn on Bluetooth within your phone - Consult phone instruction booklet
2. Put phone into pairing mode - Consult phone instruction booklet
3. Put headset into pairing mode - With headset on, press and hold call button and the volume up simultaneously until the headset begins to flash red and blue.
4. Select "Add new device" on your phone.
5. Select the Plantronics headset when prompted. Enter "0000" as passcode.
6. Your 510 headset will now have a continuous blue light blinking.
7. Choose "Yes" if your phones asks if you want to bond to the 510 bluetooth headset.
8. Your phone is now paired with the Plantronics 510 headset and ready for use.

on Jul 14, 2010 | Cell Phones

1 Answer

How do I put the Bluetooth into dicoverable mode?


Most of them you either have to hold the main button for a certain
amount of time like 5 seconds or so, until the light blinks steadily.
Then go to your phones setup on it's bluetooth and it will let you
know to place it into discover mode, say yes and it should see
your headset, then follow your phones instruction on completing
setup.
I hope that I understood your question.

Oct 04, 2010 | Just Wireless Bluetooth Headset Wireless...

1 Answer

How do I sink my Jabra BT4051 with my Nokia 2720a . I do not have a manual any more.


Usually the following setup is required to Pair bluetooth headset with mobile phone. Your mobile phone should support bluetooth interface. 1. Put the headset in pairing mode ? Make sure the headset is off. ? Press the on/off/pairing button marked until the LED indicator light is solid blue. 2. Set your Bluetooth phone to ?discover? the Jabra device Follow your phone?s instruction guide. This usually involves going to a ?setup,? ?connect? or ?Bluetooth? menu on your phone and selecting the option to ?discover? or ?add? a Bluetooth device.* 3. Your phone will find the Jabra device' Your phone then asks if you want to pair with it. Accept by pressing ?Yes? or ?OK? on the phone and confirm with the passkey or PIN = 0000 (4 zeros). Your phone will confirm when pairing is complete. In case of unsuccessful pairing, repeat steps 1 to 3.

May 12, 2010 | Jabra BT4051 Bluetooth Headset

3 Answers

How to pair my blue parrot b250 with my phone lost my notes on how to pair


1. Turn headset off (panel 5).
2. Hold down the headset’s MFB until the red and blue lights
flash and you hear 2 rising tones, followed by 4 more tones.
Important: Wait for all tones and for both lights to flash. This
may take up to 15 sec. Release the MFB.
3. Follow the manufacturer’s instructions for putting your
cellular phone into Bluetooth discovery mode.
4. Wait 5-15 sec. while the devices discover each other.
When the phone discovers the headset, select “Pair” and
enter a passcode of 0000 when instructed. When pairing
is complete the headset’s blue light will stop flashing and
the phone will prompt you to ‘connect’ to the headset.
Enter “Yes” on the phone to connect to the headset. When
connected, the blue light will flash indicating that the
headset is in standby mode ready to receive a call.

USER GUIDE


Jan 03, 2010 | VXI Corporation Blueparrott B250-XT...

1 Answer

Iphone and headsets


Yes, you can pair your iPhone with any bluetooth headset. I have used many different Plantronics headsets and all have worked perfectly.
On the iPhone, go to Settings (the gears icon), click GENERAL, then Bluetooth and make sure it's switched to "On". Then, follow the pairing instructions that come with the headset.

Oct 07, 2009 | Motorola Mobility Bluetooth...

1 Answer

Orb headset ps3 will not pair with ps3


have you put the motorla headset in pairing mode?
hold down the middle button for 6 seconds till the light stays solid, then open the boom mic and the light should remain solid indicating the headset is in pairing mode

Sep 28, 2009 | Motorola Mobility H710 Bluetooth Headset

1 Answer

Motorola Bluetooth HS850 Pairing Mode


This worked great for me... I got the headset in "pairing" mode by following these instructions. Then set my BB Curve 8350i to "discover" bluetooth devices. It discovered the headset and asked for a PIN number... one of the other articles I read said the pin was "0000" so I put that in and - PRESTO - it works

Jun 02, 2009 | Motorola Mobility HS850 Consumer Headset

3 Answers

Pairing mode for headset with PS3


On your PS3 XMB menu. Go to settings. Scroll down to accesories. Then click on manage bluetooth devices. There you will find the autodetect for the bluetooth headset. While the bluetooth headset is off, press and hold th on button until the LED stays on. The quickly use the PS3 to detect the blue tooth. It will ask for a pin to pair the units up. The pin is four zero's.

Jan 09, 2009 | Ubi Soft Entertainment Tom Clancy''s...

12 Answers

How do i connect my bletooth h350 to my phone


Hi, follow the steps to get your product paired. Step A - PUT HEADSET IN PAIRING MODE Note: To turn off headset With the headset power off, press and hold the Call button for 6 to 10 seconds until the blue indicator light turns on and remains steadily lit. (The light will flash while you hold the Call button.) If the indicator light is flashing or does not remain steadily lit, turn off the headset and repeat step above. Step B - SET THE PHONE TO LOOK FOR YOUR HEADSET Select (Menu) > Settings > Connection > Bluetooth Link > Handsfree > Look for Devices. The phone lists all Bluetooth devices it finds. Select Motorola H350. Press OK or Yes to pair (link) the handsfree device. Enter the passkey 0000 and press OK. Note: Passkey cannot be changed from 0000. When your headset is successfully paired with your phone, the blue indicator light changes from steadily lit to flashing. additional help http://www.motorola.com/mdirect/manuals/QG-H300_9495A08A.pdf all the best sreejith 2 Step A - PUT HEADSET IN PAIRING MODE Note: To turn off headset

Jul 16, 2007 | Motorola Mobility H350 Wireless Headset

Not finding what you are looking for?
Video Game Consoles & Games Logo

Related Topics:

3,224 people viewed this question

Ask a Question

Usually answered in minutes!

Top Video Game Consoles & Games Experts

James Wishart

Level 2 Expert

122 Answers

yadayada
yadayada

Level 3 Expert

76649 Answers

Brad Brown

Level 3 Expert

16010 Answers

Are you a Video Game Console and Game Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...