Question about HP LaserJet 2840 Printer

1 Answer

I have a 3600n and originally I thought the red cartridge wasn't printing but I switched the red cartridge with the black one and then their was no black on the page. Any suggestions on a fix?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 91 Answers

.XX PRINTER ERROR A firmware error occurred 1. Press CANCEL JOB to clear the print job from the printer memory. 2. Turn the printer off, and then turn the printer on. 3. Try printing a job from a different software application. If the job prints, go back to the first application and try printing a different file. (If the message only appears with a certain software application or print job, contact the software vendor for assistance.) 4. If the message persists with different software applications and print jobs, disconnect all cables to the printer that connect it to the network or printer. 5. Turn the printer off. 6. Remove all memory DIMMs or third-party DIMMs from the printer. (Do not remove the firmware DIMM in the lowest DIMM slot.) 7. Remove all EIO devices from the printer. 8. Turn the printer on. 9. If the error no longer exists, install each DIMM and EIO device one at a time, making sure to turn the printer off and back on as you install each device. 10. Replace a DIMM or EIO device if you determine that it causes the error. 11. Remember to reconnect all cables that connect the printer to the network or computer. 12. If the error persists, replace the firmware DIMM. 13. Replace the formatter. This error is usually caused by a bad formatter board.

Posted on Apr 15, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I ran out of black ink, can i still print with my other colors?


If one of the cartridges are empty these printers will typically stop and demand a new cartridge. If you are lucky enough to be able to still print then go for it.

May 23, 2011 | HP LaserJet 3600n Printer

1 Answer

Hp 3600n laster printer has started printing pink blothes on pictures


You probably have a defective magenta cartridge. To test that you need Print Test Quality pages.

1. Press Menu to open the MENUS.

2. Press to highlight DIAGNOSTICS, and then press .

3. Press to highlight PQ TROUBLESHOOTING, and then press .

The message PRINTING... PQ TROUBLESHOOTING appears on the control-panel display until the

printer finishes printing the PQ troubleshooting pages. The printer returns to the Ready state after
printing the PQ troubleshooting pages.

the pages it produces are individual colors, black, magenta, yellow and cyan and a white page and a config sheet.If the defect is on all pages then it might be a bad transfer belt. If it is only on one of the color pages, that will tell you which cartridge is bad.

Mar 11, 2011 | HP LaserJet 3600n Printer

1 Answer

Changed black cartridge now small black dots on all pages, even on test pages. bad cartridge?


Run the "Disable Cartridge Check" diagnostic
It will allow you to put the black cartridge in a different slot i.e. yellow. If the black cartridge in the yellow slot still puts black dots on the page...it is bad.
Can you put the original old black back in the printer. That will tell you right away if the replacement is bad.

Jan 20, 2011 | HP LaserJet 3600n Printer

1 Answer

HP LaserJet 3600n I replaced the black cartridge. The new one was defective and continuously calibrated! - so replaced it with another one. Before figuring out that the cartridge was the problem I...


Yes,

Go to Computer, then System Properties, The Device Manager. Down the list of devices you will see "Imaging Devices". Open the category and dowble click on your printer. Go to the Driver tab, open and,

Marcus choose.."Rool Back Driver" and follow the instructions.

Regrads

Sep 28, 2010 | HP LaserJet 3600n Printer

1 Answer

My hp laser jet 3600n print dosent working and it shows sign that "10.90.00 cartridges not engaged"


is it 10.92.00 00 means black cartridge make sure seated right could be dc controller but most likely black cartridge

Jul 28, 2010 | Office Equipment & Supplies

1 Answer

Printer is wanting to print in blue not black!?!


It would seem to me, that what you are describing is a cartridge phase problem, which will happen if the drive assembly is not correctly reinstalled after replacing the broken locks...
The technician who replaced the cartridge locks will have to remove the drive assembly and re-install it correctly.

Apr 29, 2010 | HP LaserJet 3600n Printer

1 Answer

HP 3600n color printer only printing solid black page. cartridge is fairly new. what is the problem?


defective cartridge or problem whit laser/scaner assy - replace cartridge ( to solve this just turn back your old cartridge and try to print something to be sure before you buy new one) - visit HP servise for laser/scanner assy

Sep 29, 2009 | HP Color LaserJet 3500 Printer

1 Answer

HP 3600n Cartridge Memory Tag


Check the latch on the right side of the black cartridge. They have a problem with them breaking. There is a new style available.

Oct 18, 2008 | HP LaserJet 3600n Printer

Not finding what you are looking for?
HP LaserJet 2840 Printer Logo

47 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...