Question about UPS Battery Backup Systems

1 Answer

Wont start i turn on the comp, and nothing comes on screen. it doesnt sound like any thing is loading

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert who has answered 200 questions.


    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 209 Answers
Re: wont start

Open the side casing of your cpu then try to switch-on, if you notice that the fan of your cpu rotates, the hdd led is lightng, the power-on led also lit then you heard a beep (one) sound there is no problem but your video card connection just loose

Posted on Feb 02, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

2 Answers

Apc xs900 will work off batteries not off ac

So something happened to this apc and the first thing is to replace batteries...
I'm going to guess major circuit board failure.
go to apc site, download Power Chute software and pray there are useful diagnostics.

Mar 31, 2014 | APC Back-UPS XS900 (BX900) UPS System

1 Answer

Overload indicator light stays red & continuous tone ups 1100

Take the battery out and see if it does the same thing when you turn it on.

Feb 06, 2013 | APC Back-UPS Pro 1100 (BP1100) UPS System

1 Answer

The ups gives a beep sound every one min.and also the warning on the front screen has become red.please suggest some tips to fix it

your UPS maybe overload try to remove some load or unplug some device..if nothings happen try to check the battery inside the ups,maybe its dead..

Aug 21, 2011 | Liebert UPStation GXT6000T UPS System

1 Answer

I want to connect a UPs to my computer and I don't which cable goes to a system unit or the monitor.Please show me the clip

shut down the comp and the ups
unplug the cable from the comp and plug it in to the ups i/p
take the iec male to female cable that came with the ups and plug male into ups o/p and then female into your comp

turn on ups then turn on comp

thats it

hope this helps

thanks for using FixYa

Sep 19, 2010 | Belkin (F6C800-UNV-PL) UPS System

3 Answers

I hear some tick sounds in ups and the ups doesnt supports when there is a shutdown in power


If the UPS does not support the system when there is a shut down in power it means your batteries are degraded.

you have to replace the battery of the UPS and it will be working fine then.

Thank you

Aug 06, 2009 | APC Smart-UPS 1000VA UPS System

2 Answers

I have a cyberpower 485VA and after 10 sec it turns off and beaps

It sounds like you need a new battery. The UPS will not turn on if it detects that there is a bad battery. Here's a link to a replacement:

Apr 19, 2009 | CyberPower 485VA UPS Backup (BE485) UPS...

2 Answers

LCD shows Low O/P V

Fault: Low Ouput Voltage

Cause: Surge Taken by load / Short Circuit on load / Fault in inverter

Remedy: Remove load and restart UPS / Try a different load / Repair or swap out

If you need spares or price for repair contact Eaton Power Quality Ltd - the new name for Powerware - 01753 608700

Dec 15, 2008 | Powerware 9120 UPS System

1 Answer

Monitor goes to power save mode on startup

Sounds like a bad video card (if embeded "built in") then you need a new mother board

Dec 09, 2008 | Belkin (F6C800-UNV-PL) UPS System

1 Answer


It sounds like it is a settings issue in Windows, you should be able to fix it by following this order:
Go to your Start Menu>Control Panel>Display>Settings>Advanced

Click on: "GEForce Go XXXX" and on nView Display Mode change from Single Display to either "Clone" or "Dualview"

Than click apply and that should fix your problem.

If that doesn't work, than download the Acer Driver with the for Windows XP if your monitor is certified for vista.

This is a common issue with vista,
Hope this helps!

Dec 25, 2007 | UPS Battery Backup Systems

1 Answer


I/0 error, IS AN INPUT/OUTPUT ERROR. this device is formatted as FAT32 as it is usable on all OS. however if you formatt it to the faster, safer NTFS format, it will only work on 2000, XP etc. so firstly is the device being "seen" by windows? as in does the plug and play connect device sound play? or the green arrow and card icon appera in the bottom left corner? if it doesnt your computer may not have a mass storage device installed, or a driver for it, go into your device managment and click rescan plug and play and if nothing comes up click, view hidden devices, and select the correct driver, by either manually selecting the mass storage or Hdd driver or letting windows find one on the net or locally. if this still doesnt fix things, be aware that external HDD us ealot of power, and some USB ports dont give enough power for the HDD to wind up enough speed to operate. try using a different port, 2.0 not 1.0 as i have found power draw issues with 1.0 USB and/or get a shorter, foot long or less cable. good luck.

Sep 24, 2007 | UPS Battery Backup Systems

Not finding what you are looking for?
UPS Battery Backup Systems Logo

Related Topics:

98 people viewed this question

Ask a Question

Usually answered in minutes!

Top UPS Battery Backup Systems Experts

Jax Planet
Jax Planet

Level 2 Expert

921 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Sudeep Chatterjee
Sudeep Chatterjee

Level 3 Expert

3267 Answers

Are you an UPS Battery Backup System Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides