Question about Canon imageCLASS D880 All-In-One Laser Printer

1 Answer

Fax the fax wants to keep dialing the last number I faxed, I have pushed stop, and it doesn't, it is unplugged right now. I don't know how to stop it! I have stopped a fax before it wants me to confirm, this time nothing

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 4,402 Answers
Re: fax

Changing these settings:
ECM-error correction 'off'
V.34 'off'
Silence Detection 'on'

Posted on Jan 10, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Need to know how to fax from mcf 210c

How to enter Fax mode
Before sending faxes, make sure (Fax) is illuminated in
green. If not, press (Fax) to enter Fax mode. The default
setting is Fax.
How to dial
You can dial in any of the following different ways.
Manual dialing
Press all of the digits of the phone or fax number.
Setup Send
Press Search/Speed Dial, #, and then the two digit Speed-Dial
number. (See Storing Speed-Dial numbers on page 5-1.)
You can search for names you have stored in the Speed-Dial
memories. Press Search/Speed Dial and the navigation keys to
search. (See Storing Speed-Dial numbers on page 5-1.)
* To search alphabetically, you can use the dial pad to enter the first
letter of the name you are looking for.
Fax Redial
If you are sending a fax manually and the line is busy, press
Redial/Pause, and then press Black Start or Color Start to try
again. If you want to make a second call to the last number dialed,
you can save time by pressing Redial/Pause and Black Start or
Color Start.
Redial/Pause only works if you dialed from the control panel.
If you are sending a fax automatically and the line is busy, the MFC
will automatically redial one time after five minutes.
If the LCD shows Not Registered when you enter the
Speed-Dial number, a number has not been stored for it.

Color fax transmission
Your MFC can send a color fax to machines that support this feature.
However, color faxes cannot be stored in the memory. When you
send a color fax, the MFC will send it in real time (even if Real Time
TX is set to Off).

Nov 02, 2011 | Brother MFC 210C All-In-One InkJet Printer

2 Answers

Cannot send or receive faxes, what can we do?

Clear NV RAM.....
Unplug the Power Supply from the Printer....
Press and Hold the #5 button on the Printer and plug in the Power Supply.......
Don Release the #5 button till the Printer turns on completely....
After releasing the #5 button........
Press the Menu button once Keep on Pressing the Right Navigation Key till u find an option saying Maintanence goto maintanenece and go to manufacturing and click on clear NV RAM.....
Now as soon as the Printer is Restarted.......
U will be able to send and recieve faxes.....

Good Luck!!!!

Sep 25, 2011 | Lexmark X4270 All-In-One InkJet Printer

1 Answer

Tried to fax a 2 page letter getting on the mach did it in blk /colorand still disconnect get a print out report NG: POOR LINE CONDITION/OUT OF MEMORY how do i fix this

Have a look at these solutions maybe 1 of em will help
This problem could be Phone line problem, or hardware failure or receiver's (the machine of the person whom you are sending the fax) machine problem and so on. First, let's check the line, if you have another Phone line, please dial from the number to your number, also, connect the currently connected line to a receiver and call a Land-line number, if the outgoing or incoming is ok, the proceed forward, otherwise, you telephone operator should check the line.

Sometimes, sending fax to a particular number doesn't work, to make sure, try sending a fax to another number.

If the line which is connected to the machine is extended from another machine such as Receiver, Switch, etc... unplug them and connect the fax machine directly to the Line.

It's also important to adjust the compatibility mode, to do this, follow the steps below:
Press Menu. Press the up or down arrow key to select Fax. Press OK. Press the up or down arrow key to select Miscellaneous. Press OK. Press the up or down arrow key to select Compatibility. Press the left or right arrow key to select Basic (for VoIP). Press OK. Press Stop/Exit.

Or here
hope one of em helps,

Jul 28, 2011 | Brother MFC-5840CN All-In-One InkJet...

1 Answer

My fax will not send. the report says fax sent and the result is no answer

Sounds rather conflicted...any way, first step "send" a fax to a phone that rings (cell phone, phone near the fax). Make sure that the phone you are calling rings, if not plug a phone in to the fax line and make sure you have a dial tone. If you do try to change the phone line on the fax and repeat. Basicly this step is to ensure the fax is dialing out.

Next, dial the number you are faxing to with your cell phone or another phone. Does the fax machine at the other end answer (squaking noises). If not are you dialing the right number. If the fax machine at the other end does pick up, hang up and wait a few mins (so the line will clear) and try to send your fax again.

Try sending a test fax to a known good (have sent faxes to the number before with success) fax. If this works, its a communication hand shake error. You may need to power cycle both fax machines.

Last Test, plug a different fax machine in were this one is. Using the same phone line and such try to fax again. If this is the only thing that works, the fax machine may have a bad modem.

If further information on testing the modem on the HP fax is needed let me know.

I hope one of these step gives you the help and information you are looking for.

Jul 22, 2011 | HP PSC 950 All-In-One InkJet Printer

3 Answers

How to receive fax documents

You cannot receive fax using this printer, because this printer doesn't support fax sending/receiving. Only fax supported printers can receive fax documents. You will know if a printer is fax support if you see a Fax button there or if you can see a numpad buttons where you can dial numbers.

These are the photo examples of fax printers
heifentrixx_14.jpg heifentrixx_16.jpgheifentrixx_15.jpgheifentrixx_17.jpg

Hope my solution helps. Thanks for using Fixya!

Jul 11, 2011 | Canon PIXMA iP4000 InkJet Photo Printer

1 Answer

HP Officejet 4500 three in one has error 346 and cant fax out. It dials the number correctly but as the fax begins to connect, the number changes to a plus sigh in front of it and puts a dot in between...

Error 346 means the connection was interrupted. Try a different phone cord or jack. If you have a voicemail service that 'pulses' the dial tone when you pick up (to let you know you have messages), it can cause that error too; try clearing the messages.

Adding the +1 is normal when dialing with the area code (using a 10-digit number). If you weren't using the area code, try it.

Otherwise, as a last resort, you can try resetting the fax back to factory default:
-turn off and unplug.
-Hold the # and 3 keys down while plugging in the power cord. If that doesn't work, try # and 4.

Good luck!

Mar 24, 2011 | HP Printers & Copiers

1 Answer

How to recieve a fax on the Canon PIXMA MX340 Wireless Office All-in-One Printer

Take your incoming phone line and plug it into the place that says "line" on your fax machine. Plug another phone cord into where it says "phone" and connect this to your telephone. Test to make sure you have chosen the right places by dialing a phone number to fax to and listen for the dial tone. If you get a dial tone, then you have set it up correctly.

On the fax machine look for the button that says "menu". Push it and use the up and down arrows to navigate the options on the display. Look for fax set up and press "ok" or "enter" on the fax machines keyboard to access this area. Look for "number of rings" and change the fax machine to a number of rings that is less then your voice mail box if you have one. Then close and save your choices.

Have someone send a test fax by dialing your phone number for the line connected to the machine. The fax machine will pick up on the number of rings set and automatically begin receiving and printing a copy of your incoming fax.

You cannot use magic jack.

You can also choose to manually answer an incoming fax if you see that your display on the fax machine says "ringing" or incoming" you can push the "start" button and this will start receiving your incoming fax.

Sep 30, 2010 | Canon imageCLASS MF7480 Laser Printer

1 Answer

MP780 fax ADF issue

Have you check when you dial the no. its working?? Is it any dialtone problem in fax..
Check the phone line connect to the printer fax connector properly and having pulse.

Jan 29, 2009 | Canon PIXMA MP780 All-In-One InkJet...

2 Answers

Can't receive or send fax on my lexmark X4270

In this case first we need to chk whether there is any dial tone on ur fax machine for that u need to Hit the Options button till u find an option saying On Hook Dial now hit select and it should give u a dial tone if it doesnt check the Phone Line Connections........... If it gives u a dial tone........... Unplug the Power Supply from the Printer........ Press and hold the Stop/Clear button and while holding the Stop/Clear button insert the Power Supply back to the Printer........ It will say clearing and then display a page where u need to Selct ur Country and the other details........ and as soon as this is done u can send and recieve faxes....... Thanku

Jan 12, 2009 | Lexmark X4270 All-In-One InkJet Printer

2 Answers


you can get the manual here: - LINK

Basically you plug your phone line into the fax machine line in and set the ring pick up to the desired length.

When someone calls you the fax should pick up and take the data.

Dec 12, 2008 | HP Officejet 5610 All-In-One InkJet...

Not finding what you are looking for?
Canon imageCLASS D880 All-In-One Laser Printer Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Printers & Copiers Experts


Level 3 Expert

94039 Answers

old marine
old marine

Level 3 Expert

1301 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Canon Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides