Question about Panasonic KX-TG5632 Phone

2 Answers

Lost ac adapter


In the move I lost the adapter. I am seriously needing the phone to work. I have several adapters120V 60Hz the answere on, message and lights are all flashing rapidly, the phone won't charge and nothing works. I really don't want to have to wait to order one. What do I do??

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: lost ac adapter

Where can we buy a spare ac adapter for our cordless phone, other brands of ac adapters dont work with panasonic cordless phones

Posted on Feb 12, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert who has written 50 answers of more than 400 characters.


    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 106 Answers
Re: lost ac adapter

If you are trying to guess at an adapter, and plugging them in to see if they work, you run the risk of ruining your machine. With the blinking lights its not booting correctly, so I hope your not smelling smoke too. Nevertheless, you need a 9-12 dc output adapter (with I believe the negative on the inside). Your describing the input of 120V 60HZ, all of them say this since that is the power that is coming out of your wall socket. Look on the back of your machine at the connection and it will show you the polarity via a little diagram imprinted in the plastic(if the negative goes in the center or outside of the plug) This is the most important part, if it is backwards you will fry your machine, if you have not already.

Posted on Feb 04, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

2 Answers

Why am i unable to connect to my motorola L603m and theres no power supply

Contact The point of purchase. The phone should come with a charger. Or you can contact Looking For Help to find a replacement.

Motorola Support

May 12, 2014 | Motorola Mobility L603m Digital Cordless...

1 Answer

I get a message Ac OFF

Hi, Your assumption is correct. The phone is not sensing any external AC power. If you are sure that the AC cord/adapter is plug in to the mains, then it is either: 1. the walloutlet or where the ACplug/adapters is connected does not have any power; or 2. The adapter itself is defective. Hope this b e of some help/idea. Pls post back how things turned up or should you need further information. Good luck and kind regards.

Sep 26, 2007 | GE RCA 4-Line Speakerphone

1 Answer

Hey i wanna change my answer message..lost the instructions can you help? i just need to know what combination of buttons to push ....thanks

Press and hold the announce button on the base. Record your message at the beep. Release the button when down.

You can download the manual at

Aug 23, 2011 | GE 25952EE1 Cordless Phone

1 Answer

Specifications for GE 5952EE3-A AC adapter? 9V----???

Hello there,

The specification for the GE 25952EE1 5.8 GHz Cordless Phone ac adapter is
INPUT AC 100-240V 50/60Hz
OUTPUT AC 9.6V----1A

Thank you for using fixya

Jul 06, 2011 | GE 25952EE1 Cordless Phone

2 Answers

Since changing to ACN, I get no blinking red light alerting me that we have a message.


You can try reset your phone, Turn off the phone, remove the AC adapter, press and hold the page/call button that is on the phone and plug back your Ac adapter, see if this fix the problem.

Apr 12, 2011 | AT&T TL74108 5.8 GHz Quad 1-Line Corded /...

1 Answer

We are changing office locations...can I bring our meridian phone system with us? I heard of meridian phones being run through a computer, would this apply to us...could we do this instead of transfering...

You need to take the phone system box with you. Also if you have voicemail, that box needs to move with you. Depending on how simple or complex your phone system is, there could be several other devices that need to move with you. There could be a fax switch, analog adapter, power supply for front desk cap(central answer position) button module, paging equipment, music on hold, and/or message on hold unit to name some of the more common auxilliary equipment. My advice is to have someone with knowlegde of phone systems to look at where the phone system equipment is before disconnecting and moving. If you have ip based phones, there may be a way to run them from a computer,but it would take some specialized software.

Jan 25, 2011 | Meridian Phones

2 Answers

Lost manual, need to change # of rings before machine answers pho

hey u can chk in our Fixya site
there are pages u can go thru this Showing Page 1 out of 64
hope this help u

Aug 06, 2009 | Panasonic KX-TG5632 Phone

1 Answer

Phone says OUT OF RANGE while on the base and won't work.

The handset has lost the link with the base. This link codes the handset to the base with a unique security code so others with the same phone cannot use your phone line.

If you changed the battery, try disconnecting the base telephone line and ac adapter for a while (1/2 hour or so if possible).

Remove the battery from the handset as well.

After 1/2 hour, install the battery in the handset, connect the telephone line and ac adapter to the base. Place the handset in the charging base and the link should be established. If not, the phone is defective.

May 07, 2009 | GE 27992GE5 Cordless Phone

2 Answers

Converting 120v AC adapter to 220v AC adapter

I live in the Philippines, but I've got relatives in the US who send me gadgets as gifts. I've had the same problem with my laptop before but when I called HP call center, they said that as long as it says there input 100 - 240V, then it's ok to plug it in a 110 or 220 socket. Here in the PH, we have 220V sockets, but Americans use 110.

Anyway, your phone says it can only be plugged to a 120V socket (max) so that means, you have to use a transformer (that's what we call it here. a black box-like thing) to convert the volts from 220 to 110. If you plug your phone directly, it might explode.

I hope i answered your problem.

Nov 27, 2008 | Phones

6 Answers

"New Voice Mail" stuck on screen.

Called GE. Here's what's happening (at least with my phone). I use VONAGE as a carrier. VONAGE's package includes voicemail. I have my VONAGE voicemail account set up to take any call that comes in if the answering machine on my GE phone does not pick up -- for instance if I'm on the phone and I do not "flash" over to the incoming call, that caller will eventually be sent to my VONAGE voicemail where they can leave a message. (Otherwise I would either take the call, or, if not already in use, the GE phone/answering system1.gif would simpy take the message.) This GE phone is commucating with my VONAGE account and letting me know that I have a mesage in my VONAGE account voicemail. All I have to do is either go online and delete the messages (after listening to them of course) and refresh the page. Once the messsages are deleted, the carrier lets my phone know the messages are gone and the NEW VOICE MAIL prompt on the handset disappears. I suppose I can do it by listening to the messages by calling in and deleting through the touch pad on the phone as well.

Sep 23, 2007 | GE 25932 Cordless Phone

Not finding what you are looking for?
Panasonic KX-TG5632 Phone Logo

96 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Phones Experts


Level 3 Expert

94113 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers


Level 2 Expert

82 Answers

Are you a Panasonic Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides