Question about Hobart D300 Stand Mixer

1 Answer

Have an old hobart 140 mixer and i want to chang oil what kind of oil do i use

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,922 Answers

You need to replace it with a "FOOD-GRADE" mineral oil or FOOD-GRADE white lithium grease, you can get this from "Lubri-Plate" at their web-site

Posted on Nov 19, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What kind of oil should I use in my Hobart 800 floor mixer? jdnwilk@juno.com


Hello Jdnwilk,

In a Hobart L800 you use 140 weight gear oil in the head and 90 weight gear oil in the planetary. You should start with about 160 ounces and check the sight glass and fill until in the middle of the site glass after oil settles.

Thank you for choosing FixYa.com

Mar 06, 2011 | Hobart Food Mixers

1 Answer

What oil can you use for the hobart h600


on the hobart h600 we use 120 oz of 140 weight gear oil.

Mar 04, 2011 | Hobart H600 Stand Mixer

1 Answer

Oil leak


instead of putting a gasket on tell him to take out all of the old grease out that is what has broken down and turning into oil causing a leak and if he can repace the seal around the agitator shaft replace the old grease with a high temp bearing grease or a good quality lithium grease

May 25, 2010 | Hobart A200 Stand Mixer

1 Answer

How to change oil in 20 quart hobart mixer and the type of oil


on a a200 there is no oil. this mixer requiers grease. if mixer is leaking oil it is because the grease is broken down .you have to pull tpo cover off mixer remove trans. parts clean out old grease clean all trans. parts reassemble put top cover back on .then make sure mixer runs in all 3-speeds before putting 1.5 cans of -47grease back in grease can be bought @any hobart office

Dec 20, 2009 | Hobart H600 Stand Mixer

3 Answers

Oil change for hobart h-600 mixer


Needed to know which part to open up to add or change oil on Hobart Mixer h-600

Mar 05, 2009 | Hobart H600 Stand Mixer

1 Answer

Hobart 140 Qt Mixer 4 speed. needs the oil changed? what kind of oil to use?


You can use a heavy weight gear oil or call the local hobart branch for it.To remove oil----Look under the mixer where the beater shaft is in the back and you will see a three quarter inch nut,remove this nut and drain the oil then put nut back in.To fill the unit remove the top cover screws and remove the top,you will see a long hexagon nut in length,remove this and grab a funnel then add the oil---be patient it takes time to fill as the oil is heavy.

Jul 24, 2008 | Hobart H600 Stand Mixer

2 Answers

Hobart mixer


Hi,im a hobart tech and know all these mixers well.What kind of mixer are you looking to write about?The differences are the sizes of bowls as 20qt,30qt,40qt,60,qt,80qt,140qt.Pick a mixer and i will write YOUR paper,but i want a fixya rating in return.

Mar 11, 2008 | Hobart HL600 Legacy Stand Mixer

2 Answers

Old hobart s-30 mixer oil


man you got an oldie but goodie mixer!im a hobart service tech for 8 years and have only seen about two dozen,unfortuantly parts for these units are exhuasted.as for the sight glass they do become cloudy over time and you cant determine the oil level.use a heavy gear case oil.the only way of telling is to drain the oil or if the unit is loud you should probably cange the oil.

Jan 20, 2008 | Hobart A200 Stand Mixer

Not finding what you are looking for?
Hobart D300 Stand Mixer Logo

Related Topics:

346 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hobart Food Mixers Experts

Pieter Vleeshouwers
Pieter Vleeshouwers

Level 3 Expert

1774 Answers

yadayada
yadayada

Level 3 Expert

75005 Answers

Lawrence Oravetz

Level 3 Expert

9324 Answers

Are you a Hobart Food Mixer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...