Question about HP OfficeJet J4580 All-In-One Laser Printer

1 Answer

How do I change the language on my new J4580 machine

At the moment it is all in chinese, even when I switch off and on again. How do I change the display to English?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 691 Answers

Hello

Thank you for using FixYa for your problem.

Try this;

Changing the language on the HP All-in-One displayFollow these steps to change the language on the All-in-One display.

  1. Press the Setup button (How do I change the language on my new J4580 machi - c01361401.gif).
  2. Use the arrow buttons (c01185072.jpg) to select BasicHow do I change the language on my new J4580 machi - c01185108.jpg, and then press OK Use the arrow buttons (c01185108.jpg) to select Set Language, and then press OK.
  3. Use the arrow buttons (c01185108.jpgc01185072.jpg) to scroll through the language options until the preferred language is displayed.
  4. Press the numbers on the numeric keypad that correspond to the appropriate language displayed on the control panel display.
    NOTE: Ifa selection is not made within five seconds, the display automaticallychanges to show the next language. If a selection is not made withintwo minutes the setup menu exits and the language/region remainsunchanged.
  5. Confirm the language choice.
    • Press the number corresponding to Yes to confirm the selected language.
    • Press the number corresponding to No to select a different language.
  6. Aftera language is selected, a screen is displayed for region selection.Press the numbers on the numeric keypad that correspond to theappropriate region.
    NOTE: Ifa selection is not made within five seconds, the display automaticallychanges to show the next region. If a selection is not made within twominutes the setup menu exits and the language/region remains unchanged.
  7. Confirm the region choice.
    • Press the number corresponding to Yes to confirm the selected region.
    • Press the number corresponding to No to select a different region.

Please Rate my solution or reply for another answer if still not going

Thanks
Richard Scott
Technical Support

Posted on Nov 18, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Please somebody can teach me how to change language on biz hub c300. It is in chinese and i would like to change to english or portuguese. Thank you


On Control Panel-Touch Screen, Down right Side there is a tab to change the languages/Language Setting.
Even if it is Chinese or Portuguese language showing just click on the down right side button on touch screen, a new menu will appear. From there you can select your desired language.English-Chinese etc.

Mar 13, 2015 | Konica Minolta Bizhub C300 All-In-One...

1 Answer

How to set the language to chinese


Unfortunately the Kindle Fire does not support the Chinese language at the moment. You may install Google Play store and then install a Chinese Translator.

Apr 11, 2013 | Amazon Kindle Fire HD

3 Answers

I have a samsung hf 1000 which speaks to me in chinese but i need it in english, any ideas please?


I did this to my HF1000 Handsfree device this evening as I had mine in chinese language as well today.
Power up the unit the vioce will say power on, wait for silence then push and hold the Call button, the unit will speak the pairing instructions including the pair code of 0000. regardless of the language the voice will repeat the number four times, so even thought you might not understand it, you will hear the number repeat....
After a brief silence period, press and hold the call button again, the next announcement is the language selection menu. After the announcement press the Volume + (plus) button to change the langauge, this announcement is quite long. Wait for each announcement (they are maybe two full sentences long).

Press the plus (+) Volume button to again to change to the next language, wait the appropriate length of time and press the plus Volume key again, for the next language....

Chinese language is directly after English, and so you need to go throught the key press sequence about I think five times. English, then Chinese, Italian, Spanish then German, is the sequence I believe.

Hope this helps!

Oct 08, 2011 | Samsung HF1000 Bluetooth Headset

1 Answer

How do i convert my acer netbook to english language from chinese?


You have to download and install a LIP (Lanaguage Interface pack) A LIP changes everything in Windows, to another language. but you cannot change the language Windows uses on the screen unless you buy the English version.

However IF it is Chinese Windows, then you will never really be 100% converted, the BEST way then, is to remove OLD Chinese Windows, and install a NEW English Version.

Normally just go to Control Panel, Regional and Language Option, click the Language tab, Details radio button, click Add radio button, click the drop down box and select the language. It may ask you for the distribution disc. Once multiple language had been added, a language switching Task Tray will appear near the normal Task Tray in the lower right corner. Shift-Alt will also switch the languages.


In Windows 7's Search programs and files box
type Anytime and click on the Windows Anytime Upgrade icon that appears. Purchase a Windows Anytime Upgrade product key for Windows 7 Ultimate edition and upgrade to Windows 7 Ultimate. Afterward, visit Windows Update and download the English language pack.

Aug 28, 2010 | Acer Computers & Internet

3 Answers

Convert win98 os from chinese to english


all you can is to reinstall your operating system. Buy a OEM ms98 english version.. then install. GOOD LUCK

May 05, 2009 | Microsoft Windows 98 for PC

2 Answers

Language problem


switch on machine click start>setting >control pannal >clock language region > regional language option > after that select language english if its not changed then enter cd and reformatt it by selecting english language

Jul 03, 2008 | Microsoft Windows Vista Ultimate Edition

1 Answer

Language


Go to settings, then general, then international, then language

or if in chinese:

go to
设置
then
一般 then 国际 then 语言 then the language part: 英语 (or english if it's listed as such)

Jun 21, 2008 | Apple iPhone Smartphone

2 Answers

Changed language to french!


Disconnect your iPod from your computer, then press the Menu button until the menu title says "iPod," regardless of the language displayed. This means you are at the main menu.

  1. Scroll down to the last menu option but don't select it.
  2. Scroll up one menu item. This should be Settings.
  3. Press the Center (Select) button. This takes you to the Settings menu.
  4. Scroll down to the last menu option but don't select it; in English, this is the "Reset All Settings" option.
  5. Scroll up to the third menu item from the bottom one. This should be Language.
  6. Press the Center button to select Language.
  7. Select your preferred language from the list.

Feb 09, 2008 | Apple iPod nano

3 Answers

How do I add chinese in Windows XP?


You can go to http://www.download.com/Office-XP-Tool-Traditional-Chinese-Language-Pack/3000-2064_4-6158807.html and download the chinese language pack. It is FREE! Hope this works for you.

Jun 28, 2007 | Microsoft Windows XP Professional With...

Not finding what you are looking for?
HP OfficeJet J4580 All-In-One Laser Printer Logo

180 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...