Question about Canon PIXMA iP3000 InkJet Photo Printer

1 Answer

Printer will not turn on. When the power button

Printer will not turn on. When the power button is pushed the green light is on for only a second.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,044 Answers

Check the cord and ensure it is plugged properly.
If it does not turn on then your power button has to be replaced

Posted on Nov 18, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a separate fax line for my Canon MX310. It goes into fax mode but noting happens. I also cannot receive faxes.


The only reason to call the phone company is if you're not getting a dial tone on that line. Otherwise, have you shut down the printer and tried to reset it to factory defaults. To do that, follow the instructions below:
  • 1 Switch the Canon MX310 off using the "Power" button, then push the "Stop/Reset" button on the control panel. Hold the button down for about five seconds.
  • 2 Push the "Power" button while holding "Stop/Reset." Hold down both buttons for five seconds.
  • 3 Release "Stop/Reset" while holding down the "Power" button.
  • 4 Push "Stop/Reset" twice while continuing to hold the "Power" button. Release the "Power" button. The power light will turn green.
  • 5 Once the light is steady green, push "Stop/Reset." Wait about three seconds and push it again. Wait three more seconds and push it one final time, for a total of three times. The power light will turn orange.
  • 6 Push the "Power" button, then lift the MX310 cover open.
  • 7 Remove both ink cartridges and wait 10 seconds. Replace the cartridges and close the MX310 cover. Wait 30 seconds.
  • 8 Push the "Power" button. Wait a few seconds to allow the printer to fully power down, then switch the Canon MX310 back on using the "Power" button.
  • Good Luck Mark

Feb 20, 2015 | Canon PIXMA MX310 All-In-One Printer

1 Answer

Printer does not print


Instructions
    • 1 Switch the Canon MX310 off using the "Power" button, then push the "Stop/Reset" button on the control panel. Hold the button down for about five seconds.
    • 2 Push the "Power" button while holding "Stop/Reset." Hold down both buttons for five seconds.
    • 3 Release "Stop/Reset" while holding down the "Power" button.
    • 4 Push "Stop/Reset" twice while continuing to hold the "Power" button. Release the "Power" button. The power light will turn green.
    • 5 Once the light is steady green, push "Stop/Reset." Wait about three seconds and push it again. Wait three more seconds and push it one final time, for a total of three times. The power light will turn orange.
    • 6 Push the "Power" button, then lift the MX310 cover open.
    • 7 Remove both ink cartridges and wait 10 seconds. Replace the cartridges and close the MX310 cover. Wait 30 seconds.
    • 8 Push the "Power" button. Wait a few seconds to allow the printer to fully power down, then switch the Canon MX310 back on using the "Power" button.

Jul 23, 2014 | Canon PIXMA MX310 All-In-One Printer

1 Answer

P1102 reser counter


  • I take it you are refilling the toner cartridge...
  • Switch the printer off.
  • Press and hold the green button on your printer and turn the printer on. You will see that the lights flash for a moment and then turn off. After a few seconds, the attention light will turn on followed by ready light and the green light. Keep pressing the green button. In a few seconds, the attention light and the ready light will turn off.
  • Push the toner rotate button while you continue pressing the green button. As you briefly push the toner button, you will see the light flashing. Release both the toner button and the green button.
  • Repeatedly push the red button (cancel button). Now all the working lights on the printer will turn off.
  • Open and close the lid of HP printer once. The light will start blinking.
  • Press the green button. Your HP toner cartridge chip will be reset.
  • Apr 25, 2014 | HEWLETT-PACKARD Hewlett Packard P1102...

    1 Answer

    Is not working more


    Switch the printer off.

    Press and hold the green button on your printer and turn the printer on. You will see that the lights flash for a moment and then turn off. After a few seconds, the attention light will turn on followed by ready light and the green light. Keep pressing the green button. In a few seconds, the attention light and the ready light will turn off.

    Push the toner rotate button while you continue pressing the green button. As you briefly push the toner button, you will see the light flashing. Release both the toner button and the green button.

    Repeatedly push the red button (cancel button). Now all the working lights on the printer will turn off.

    Open and close the lid of HP printer once. The light will start blinking.

    Press the green button. Your HP toner cartridge chip will be reset.

    Jan 29, 2013 | HP DeskJet F4280 All In One Printer InkJet

    2 Answers

    My Epson Stylus photo 830 flashing lights


    Got the alternate red/green flashing light ona photo830. The app shown by Bill Miller sorted the problem and got the printer back on line. Use the 'protection counter' / 'reset counter option'

    Thanks Bill :-)

    Mar 03, 2012 | Epson Stylus Photo 830 InkJet Printer

    1 Answer

    The ink pads are at the end if their service life.


    Depending on what type of printer you have:

    Procedure 1 We found this procedure to work for the Stylus Photo 1270 type printer, and understand that it also works for the 870 range and even earlier models like the Stylus Color 740. The error is indicated on these printers by all four lights on the printer flashing. Even if you press the power switch on the printer, the lights continue to flash, and the printer does not turn off!
    1. Turn off your printer, ensuring that the print head is at it's home location and locked in place as normal;
    2. Power off the printer at the wall or by removing the power cable, for at least 20 seconds;
    3. When you restore power to the printer at the wall socket or by reinserting the cable, if the lights come back on straight away, the printer's power switch was 'on' - switch it off and return to step 1;
    4. Hold down the paper-feed button and the button with the ink-drops next to it, and then turn on the printer, still holding the buttons down;
    5. When the paper-out LED flashes, release the buttons;
    6. Press and hold the Cleaning button, until several lights flash - this will take a few seconds (i.e. then release the button);
    7. The printer will now attempt to reset, including resetting the EEPROM memory and running a short (about 10 seconds) cleaning cycle.
    Procedure 2
    1. Turn off your printer, ensuring that the print head is at it's home location and locked in place as normal;
    2. Hold down the paper feed button only;
    3. Turn on the printer;
    4. As the paper feed light starts flashing, release the button;
    5. Immediately hold down the ink-drops button for some 10-20 seconds or until the printer springs into life;
    6. Allow printer to complete it's processing, then turn off for a few seconds, and back on again for a newly working printer!
    Procedure 3 - for 1290 and possibly 890 printers 1290 printer with green (power / data) and red (ink / paper feed) lights flashing alternately:
    1. Switch off printer with panel switch;
    2. Switch off printer at mains switch - leave off for 20+ seconds;
    3. Hold down roll feed and sheet feed buttons;
    4. Switch on at mains;
    5. Switch on at printer panel;
    6. Continue to hold down roll and sheet feed buttons until both green and red lights flash together in synchronisation, not alternately;
    7. Switch printer off and then, after a few seconds, on again at mains switch;
    8. When red and green lights are both flashing in synchronisation, release the roll and sheet feed buttons;
    9. Press and hold down the ROLL FEED button (the one at the extreme left) and keep it down until the machine finishes whirring, cleaning etc and the green light comes on steady;
    10. Release the roll feed button and all should be well.

    Mar 13, 2011 | Epson Office Equipment & Supplies

    1 Answer

    When I try to send a fax I get a redo message and no pages are sent...i have sent many faxes to this number....a message appeared after one page was scanned that said to prress clear and srop...i could not...


    Please reset the Printer by following these steps:

    Switch the Canon MX310 off using the "Power" button, then push the "Stop/Reset" button on the control panel. Hold the button down for about five seconds.

    Push the "Power" button while holding "Stop/Reset." Hold down both buttons for five seconds.

    Release "Stop/Reset" while holding down the "Power" button.

    Push "Stop/Reset" twice while continuing to hold the "Power" button. Release the "Power" button. The power light will turn green.

    Once the light is steady green, push "Stop/Reset." Wait about three seconds and push it again. Wait three more seconds and push it one final time, for a total of three times. The power light will turn orange.

    Push the "Power" button, then lift the MX310 cover open.

    Remove both ink cartridges and wait 10 seconds. Replace the cartridges and close the MX310 cover. Wait 30 seconds.

    Push the "Power" button. Wait a few seconds to allow the printer to fully power down, then switch the Canon MX310 back on using the "Power" button.

    Feb 27, 2011 | Canon MX310 Office All-In-One Printer

    1 Answer

    S9000 canon printer ink tank full


    Hi
    Try this see if work for you.
    may work
    Canon S9000, S300, S400, i550, i560, i850, i860, i865, i9100, i9950, PIXMA iP3000 above,
    1. Turn off printer
    2. Hold down Resume button and press Power button.
    3. Keep holding down Power button and let Resume button go.
    4. Press Resume button 2 times then let BOTH buttons go.
    5. Green lights will flash and then stop blinking.
    6. When green lights are solid, press the Resume button 4 times.
    7. Press the Power button and the printer should turn off, if not, press the Power button once more.
    8. Your printer should respond as normal.

    Nov 02, 2008 | Canon i950 InkJet Photo Printer

    1 Answer

    Error number 1700 canon s9000 printer


    knowing printer manufacturers I doubt they even have a sensor to detect that its full at all, they probably based on something crumby like print count. here are some instructions to reset the waste ink tank, the instructions vary so try them until one does the job :
    Waste Ink Tank Reset

    1: Power off printer
    2: Hold Resume button then press and hold POWER, the beeper will sound once.
    3: Hold POWER and release RESUME
    4: Press RESUME twice, then release all buttons
    5: When the indicator lights steady, press RESUME three or four times. The indicator should be orange.
    6: Press Power to set data



    1. Turn off printer
    2. Hold down Resume button and press Power button.
    3. Keep holding down Power button and let Resume button go.
    4. Press Resume button 2 times then let BOTH buttons go.
    5. Green lights will flash and then stop blinking.
    6. When green lights are solid, press the Resume button 4 times.
    7. Press the Power button and the printer should turn off, if not, press the Power button once more.
    8. Your printer should respond as normal.



    1. power off Printer
    2. Push and hold resume button and push power button
    3. Hold Power button and release Resume button
    4. Push Resume button twice ( 2x ), and now release resume button and power button
    5. Green light will blinking and stop.
    6. When green light on, push resume button 4 x
    7. Push Power button and printer will off, if that isn't off, push power butto again until print off position.

    Aug 20, 2008 | Office Equipment & Supplies

    1 Answer

    My canon ip2000 won't reset


    Canon IP 2000 / reset Hi there you can try this.

    1. Turn off printer
    2. Hold down Resume button and press Power button.
    3. Keep holding down Power button and let Resume button go.
    4. Press Resume button 2 times then let BOTH buttons go.
    5. Green lights will flash and then stop blinking.
    6. When green lights are solid, press the Resume button 4 times.
    7. Press the Power button and the printer should turn off, if not,
    press the Power button once more.
    8. Your printer should respond as normal..


    All the Best Pineworks

    Apr 06, 2008 | Canon PIXMA iP2000 InkJet Printer

    Not finding what you are looking for?
    Canon PIXMA iP3000 InkJet Photo Printer Logo

    Related Topics:

    123 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Canon Office Equipment & Supplies Experts

    kakima

    Level 3 Expert

    102366 Answers

    old marine
    old marine

    Level 3 Expert

    1983 Answers

    Doctor PC
    Doctor PC

    Level 3 Expert

    7733 Answers

    Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...