Question about GE Profile JT952 Electric Double Oven
After cleaning oven, door would not close/lock...What to do?
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
It was a "reset" switch in behind the control panel that went off when the self clean cycle increased the temperature in the area behind the control panel got too hot. After flipping the breaker, and then flipping it back on the oven finally unlocked. I pulled the control panel off and pushed the reset switch. Everything fired back up great. I just won't use the Self-Clean ever again.
Posted on Oct 23, 2007
The switch inside the door lock mechanism is stuck down making the unit think it is still locked. the switched is located next to the hook that locks your door.
Posted on Oct 31, 2007
Check out my solution at the following link:
I have now shared this with over 1470 folks and most report success.
I hope that it works for you too.
Posted on Dec 14, 2007
For me the solution was in the temperature sensor. The Locked light kept flashing and the door locking mechanism kept cycling when the door was shut or if I just held the oven light switch in the closed door position. After replacing the control panel I still had the same problem. Next I turned off the breaker and then took off the wire covers on the back of the oven and disconnected the temperature sensor. I then checked the continuity of the sensor which was fine. With the sensor still unplugged, I turned the breaker back on and the panel said locked but the locking mechanism was not cycling. With power still on to the oven I connected the temperature sensor. It worked. All I had to do was press the clear button on the touch panel and everything was fine. I turned the breaker back off and reassembled the oven. Hope this helps.
Posted on Dec 12, 2008
Tips for a great answer:
Apr 25, 2017 | GE Ovens
Feb 20, 2016 | GE Ovens
Dec 30, 2015 | GE Ovens
Apr 23, 2010 | GE Profile JTP56 Electric Double Oven
Sep 03, 2009 | GE Profile JT912 Electric Single Oven
Jan 20, 2008 | GE Profile JTP18 Electric Single Oven
Oct 29, 2007 | GE Profile JTP56 Electric Double Oven
Nov 26, 2016 | GE Profile JT952 Electric Double Oven
263 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: