Question about Husqvarna Huskylock Computerized 905

1 Answer

Hi, I have a huskylock 905 NOT computerized and it's making a "clunking" noise while sewing and then the "D" thread breaks. I've re-threaded many times, changed thread, changed needles, adjusted tention cleaned and oiled the machine. The thread continues to break and I end up sewing with 3 threads. It's not the first time I've heard the noise before the thread breaks but its the first time I'm unable to fix it. Please help...thanks.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Husqvarna Expert
  • 371 Answers

Sounds like the D needle is hitting something in the loopers and an adjustment needs to be made. The adjustments are ever so slightly. It could be that the needle bar is twisted causing the D needle to hit. It could be the looper is not within the specs for proper operation, etc. Suggest you take it to an authorized husqvarna viking dealer for service. You can locate a dealer near you by visiting the husqvarna viking website and clicking on the Dealer link on the left-hand side of the page - http://www.husqvarnaviking.com
Good luck.

Posted on Feb 14, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Husklock 910: D thread keeps breaking.


I believe the thread is not seated correctly in the tension discs, place one hand in front and one hand behind disc while threading and press thread into tension that way it gets seated.

Dec 29, 2014 | Husqvarna Huskylock Computerized 910

1 Answer

Thread coming out of eye of right needle on huskylock 910


Hi:

Are you sure it's coming out? Or is it breaking at the needle?

Try replacing the right needle and do a test stitch. If it still comes out of the needle... loosen that threads tension a little.

Aug 01, 2012 | Husqvarna Huskylock Computerized 910

1 Answer

My Huskylock 936 won't sew. I was sewing yesterday, 4 thread overlock. I finished a seam, cut the thread, proceeded to sew another seam. I put my foot on the pedal..and nothing.If I turn the machi


Good evening madam
It sounds like there is something wrong with the electrical system in your sewing machine. You can check the power and connections.
good luck
Kolbrun

Feb 26, 2012 | Husqvarna Huskylock Computerized 936

1 Answer

I have the huskylock 905 and it is running great--but-- the seam easily spreads apart after sewing. I have adjusted all of the tensions in different areas and it looks great until you hold the fabric and...


The left needle thread tension is the problem if the seam can be pulled open. Check the threading and tension on this needle, you may find that the stitch looks okay on the top but on the underside the left needle thread is actually lying against the right needle stitching.

Check the left needle tension device is working, clean it according to the manual instructions, rethread and ensure it is set to the normal number (probably 5), then test again and see if its still happening. If so the tension device is probably faulting and will need a service.

Reading your description again, if the whole seam is pulling apart fully, then all the tensions are too loose. Either way, I'd take it to the Husqvarna dealer for a service, all machines benefit from one at least every 2 years.

May 05, 2011 | Husqvarna Huskylock Computerized 905

1 Answer

My 905 Huskylock was stitching just fine. I changed the thread last night by tying on new threads but one of the knots got caught in the tension plates. I cut it out and rethreaded the machine. It will...


It just may be that you haven't seated the thread in the tention disc, put on hand on each side of the disc when threading and push down to be sure its seated, I don't reccomed that you just 'tye' the treads to change colors, may I suggest that you practice threading your machine, it will come as second nature and really is very easy to thread

Aug 13, 2010 | Husqvarna Huskylock Computerized 905

1 Answer

My overlock is not looping, I have rethreaded 3 times, no loops


You still are not treading it right...don't let it intimidate you, if you follow the manual and make sure that the thread is locked in the the top tension discs you should be fine.

May 04, 2010 | Husqvarna Huskylock Computerized 905

1 Answer

I have a Huskylock 905 serger and all of a sudden it won't create a loop. I'm 99% sure that I have it threaded correctly. Any thoughts on what might have gone wrong?


Rethread. If still not working the loopers are out of adjustment. You might want to take it to an authorized husqvarna viking dealer for service. You can locate a dealer near you by visiting the husqvarna viking website and clicking on the Dealer link on the left-hand side of the page - http://www.husqvarnaviking.com

Good luck.

Dec 25, 2009 | Husqvarna Huskylock Computerized 905

1 Answer

Huskylock 910


I received a cd with my machine showing step by step how to thread it. I put the machine beside my computer and threaded it step by step by watching the cd. One problem I had after threading it was not being able to sew a chain without the thread matting up and making a real "mess". The problem was I did not push the thread up against the machine until it clicked. That sets the tension. Try that and if you still have a problem email me and I will try to help. HisOwn2@triad.rr.com

May 20, 2008 | Husqvarna Huskylock Computerized 910

Not finding what you are looking for?
Sewing Machines Logo

217 people viewed this question

Ask a Question

Usually answered in minutes!

Top Husqvarna Sewing Machines Experts

Douglas Plant
Douglas Plant

Level 2 Expert

179 Answers

Tally Girl
Tally Girl

Level 3 Expert

1122 Answers

Derek Massey

Level 2 Expert

92 Answers

Are you a Husqvarna Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...