Question about Mitsubishi WS-65511 65" Rear Projection Television

1 Answer

WS-65511 turn itself off after turned on a few seconds, the error code is 2-2, I read some solutions related to this problem and checked the 2 pico fuses F9A04 and F9A05, the F9A04 is blown, what I should check next? can I get detailed instructions on how to fix this problem? thanks!

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Mitsubishi Master
  • 1,779 Answers

Your STK convergence ic's need replaced.

Posted on Nov 18, 2009

Testimonial: "TV is working again after I replaced the STK convergence IC and a pico fuse."

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Mitsubishi Model WS-65511 the green light on the front was flahing (would not stop) I replaced the 7 Capacitors as was suggested. The light flashed for a while then stopped and turned green


I think I advised you before (on this page you will find a "make a comment button" which allows follow up questions and answers without posting another question.

Green power light now comes on and goes out in few seconds:

On front of set (not the remote) press and hold when that happens both the menu and input buttons for at least 5 seconds and release both.

Power light will blink a 2 digit code like 2 blinks, 2 blinks, pause and repeat that several times---this is an error code---let me know what code you find.

Note: if you have unplugged the set it clears the error codes and you have to plug back and try to turn set on--let it fail and repeat the self check.

SD TECH

Apr 22, 2012 | Mitsubishi WS-65511 65" Rear Projection...

1 Answer

Won't turn on


10_10_2011_10_21_33_pm.jpg

If power light comes on for a few seconds and goes off: on front of set press and hold both the Menu and input buttons for at least 5 seconds and release both.

Power light will blink a two digit error code like 2 blinks, 2 blinks, a pause and repeat it several times.

Please let me know what error code you find and I will tell you what it means.

SD TECH

Oct 09, 2011 | Mitsubishi WS-65511 65" Rear Projection...

1 Answer

Power comes on and the back off.... Code is two flashes then paus then two flashes.... Where do I check to find fuses to the convergence?


Hi,

This is a short protect error code. The affected parts is not only the pico fuses but also the convergence IC(STK393-110) that is mounted on the large aluminum heat sink. I have a link where you can buy the repair kit that includes steps-by-steps instructions that will guide you in the whole process of repair. Click the link below.

Mitsubishi V21 chassis(WS-65511) convergence repair kit ($42).

Scroll down to V21 chassis convergence repair kit.

Hope I helped you.
Have a nice day!
Thanks for using Fixya.

Sep 13, 2011 | Mitsubishi WS-65511 65" Rear Projection...

1 Answer

Model WS55819, shut off and won't turn back on. The first few times I tried to turn it on, the indicator light came on and went off after a few seconds. Now there is nothing. I removed the panel from the...


Hi,
Most common problem in WS-55819 is failure of convergence output chips and blown pico fuses in power supply section.
You need to read out error code in tv, procedure is as follows:
Pressing the front panel "INPUT" and "MENU" buttons at the same time, and holding for 5 seconds,
activates the Error Code Mode. The LED flashes denoting a two digit Error Code, or indicating no problem has occurred since the last Initialization.
Note: The front panel buttons must used, NOT those on the Remote Control.
• The number of flashes indicates the value of the MSD (tens digit) of the Error Code.
• The flashing then pauses for approximately 1/2 second.
• The LED then flashes indicating the value of the LSD (ones digit) of the Error Code.
• The Error Code is repeated a total of 5 times.
Example: If the Error Code is "24", the LED will flash two times, pause, and then flash four
times.
Error codes detail:
The Error Code designations indicating a malfunction, or no malfunction, are listed below:
"12" ... indicates no error has occurred.
"21" ... X-Ray Protect circuit.
"22" ... Short Protect circuit.
"23" ... Horizontal Deflection failure.
"24" ... Vertical Deflection failure.
This way you can determine what section got problem in tv and causing problem.
Let me know if you need further info.
Thanks.

Dec 13, 2010 | Mitsubishi WS-55819 55" Rear Projection...

2 Answers

Mitsubishi ws-65511 tv won't turn on


If the green power light on the front comes on for a second or two and goes out: Press and hold both the menu and input buttons on the front of the set for at least 5 seconds and release both. Power light will blink a two digit error code: 2 blinks, 2 blinks, pause and it will repeat several times. Let me know if you find a error code and I will tell you what it means. IF this information was something you did not know, rate this solution as very helpful as I do this here for free. SD TECH

Sep 07, 2010 | Mitsubishi WS-65511 65" Rear Projection...

1 Answer

My HD 1080 WS-55809 won't turn on - little green light comes on for 2 - 3 seconds, then nothing. It was fine - we were watching a DVD but had it on pause - the tv turned itself off - then it won't turn...


Hi


Thanks for using FixYa. Error code 2-2 means short protect which is either caused by bad convergence ICs and/or 2 Pico fuses (F9A05 and F9A04). You’ll need to open the back of the unit and replace the parts that have gone bad to resolve this issue.
Please do rate the solution if the issue is resolved or post a comment for further assistance.


Thanks
Rylee

Jun 21, 2010 | Mitsubishi WS-55809 55" Rear Projection...

1 Answer

Mitsubishi WS-65511. Won't stay on.


Bad filters in the main microprocessor. good luck.

Aug 30, 2009 | Mitsubishi WS-65511 65" Rear Projection...

2 Answers

2001 Mitsubishi 65 inch HD1080 rear projection. When I turn it on, green light comes on for 2 seconds then it turns itself off. No flashing green light like others I read about.


Ok, try this first. After attempting to turn on set after it shuts off push and hold the MENU and INPUT buttons at the same time on the front of the set for 10 seconds. This should acccuate the self diagnostics function in the micro and the power LED should start blinking a two sequence code. That code will narrow things down.

Jun 03, 2009 | Mitsubishi WS-65511 65" Rear Projection...

1 Answer

My Mitsubishi WS-65511 won't turn on.


I have had my WS-65511 fail like this, first at 4 years, second 2 weeks later, then 3rd time yesterday (4/14/2009). In past, the tech replaced a thermal sensor p/n 299P313010A (but Mitsubishi says that part is not for WS-65511 and that it does not have a thermal sensor - go figure). It is a white rectangle with about 30 pins in 2 rows and is soldered onto a board in the TV. List price is about $25. Might be your problem.

Feb 22, 2009 | Mitsubishi WS-65511 65" Rear Projection...

Not finding what you are looking for?

Open Questions:

See all Mitsubishi WS-65511 65" Rear Projection Television Questions

Mitsubishi WS-65511 65" Rear Projection Television Logo

Related Topics:

450 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1210 Answers

The Knight
The Knight

Level 3 Expert

74251 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...