Question about Whirlpool Ovens

1 Answer

Stove works fine, only the oven will not turn on.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 126 Answers

If it's electric, it is possible that you are only getting 110 volts to the range. It runs on a 220v line, so if one leg of the circuit kicks off, you could still operate the top burners. If this isnt the problem, you may have burned out your bake element. Try your broil element.

Posted on Nov 19, 2009

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 135 Answers

SOURCE: Gas stove works, but oven does not

you most likely have a bad oven ignitor...if you see an orange glow under the oven panel that is your ignitor trying to come on....but if it is weak it will not open the gas valve.....acess the ignitor and replace it

Posted on Jul 30, 2008

  • 10865 Answers

SOURCE: propane not getting to oven... stove top works fine..

The pilot light must be lit and stay lit before you will have any propane coming into the oven. This is a safety feature.

Posted on May 20, 2009

  • 1 Answer

SOURCE: Frigidaire gallery stove, oven not working,

Morison,
The same thing happened to me about a week ago. I was preheating our electric oven, heard a very loud bang/pop. Checked and the oven had PF (power failure) I went downstairs and the breaker was tripped. Came back upstairs and to look at stove, the burners are working fine so I continued to preheat oven after a half an hour the oven was only slightly warm. Did you ever find out what was wrong?

Posted on Aug 07, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My oven doesn't turn on but the stove top works fine. It just blinks e0 03


I would check the heating element assuming this is an electric.

Jan 28, 2013 | Ovens

1 Answer

I have the fisher paykel pepper electric stove top and oven at home. the stove is working just fine, but below it the oven turns on but it doesnt heat up. what should i do?


When you say that the oven turns on I assume that the oven indicator light is working. If this is so there will be only two likely causes for the oven not working.
Oven element is faulty - check by performing continuity test;
Wiring at oven element terminals burnt off - check visually.
If you are handy carry out the above. If not, call a repairman.

Feb 15, 2011 | Ovens

1 Answer

I have a kenmore electric stove. The top burner


I have the same problem, it turns out that the clock has a sensor in it to turn on the oven. If that sensor is not working, which is found in the clock, the oven does not work. I had a repair guy come out and it will cost 350.00 to repair. My stove is only six years old. It is only two months to the day off warranty. Apparently a power outage can cause the sensor to go. Hope this helps.

May 12, 2010 | Kenmore 40494 / 40495 / 40499 Electric...

2 Answers

Frigidaire gallery stove, oven not working,


Morison,
The same thing happened to me about a week ago. I was preheating our electric oven, heard a very loud bang/pop. Checked and the oven had PF (power failure) I went downstairs and the breaker was tripped. Came back upstairs and to look at stove, the burners are working fine so I continued to preheat oven after a half an hour the oven was only slightly warm. Did you ever find out what was wrong?

May 04, 2010 | Frigidaire 30" Self-Cleaning Freestanding...

1 Answer

Propane not getting to oven... stove top works fine..


The pilot light must be lit and stay lit before you will have any propane coming into the oven. This is a safety feature.

May 17, 2009 | Magic Chef 9122 Gas Single Oven

1 Answer

Stove works, oven does not


in repairing Kenmores there is a relay well 2 small black an square in the head unit of stove one for stove the other is for oven anyway they go out alot a setback to the kenmore digital controls take upper panel off where controls are look at the green board an you can see them some green some red or blue to tell if one is bad be careful an turn the stove on u will hear the relay click then try oven if you do not hear a click its bad do not i repeat do not touch it while its on

Aug 31, 2008 | Kenmore 40494 / 40495 / 40499 Electric...

2 Answers

Gas stove works, but oven does not


you most likely have a bad oven ignitor...if you see an orange glow under the oven panel that is your ignitor trying to come on....but if it is weak it will not open the gas valve.....acess the ignitor and replace it

Jul 30, 2008 | Frigidaire FGB24S5A Gas Single Oven

1 Answer

Gas stove works, but oven does not


yes replace the ignitor, this is the most common failures of ovens not coming on.

Dec 10, 2007 | Whirlpool SB160PEE Gas Single Oven

Not finding what you are looking for?
Ovens Logo

Related Topics:

76 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Ovens Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

ashburton

Level 3 Expert

417 Answers

Sal De GO PATS

Level 3 Expert

2536 Answers

Are you a Whirlpool Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...