Question about Acer Aspire E700 PC Desktop

1 Answer

I had a power cut in my area and my pc was on at the time, when i turned it back on the pc asked me to use launching tool to get it on so i did but the pc did nothing so i turned it off again and on did the same thing but this time the word stop came up with a bunch of numbers and saying windows was shut down to prevent damage or something like that.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

That's the famous BSOD (Blue Screen Of Death). You don't say what version of Windows you are using. If you press the F8 key as soon as the machine's completed its POST (Power On Self Test) you might get to a Windows menu that allows you to try either the last known-good configuration or Safe Mode. Alternatively you might be able to either repair the installation or restore it to an earlier configuration. If you need more help, let me know what version of Windows you have.

Posted on Nov 18, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Reboot Toshiba laptop


Step One: Remove power (either pull the battery or press and hold the power button)
Step Two: Add power (either put the battery back in or press the power button just once)
Step Three: Press F2, F10, and F12 buttons repeatedly one at a time until boot menu screen displays.
Step Four: Navigate to boot options
Step Five: Boot in Safe Mode
Step Six: Once computer has booted properly restart computer.
Step Seven: (If asked, select launch last known good configuration)

If this doesn't work please send more information.

Image of boot menu screen attached

26184899-04wmihskzfwqw0mi0lfi52s0-1-0.jpg

May 04, 2016 | Toshiba Computers & Internet

Tip

Get back the Quick Launch bar Windows 7's new taskbar functions as a program...


Get back the Quick Launch bar Windows 7's new taskbar functions as a program launcher as well as task switcher. As a result, the old Quick Launch bar, the area on the left side of the taskbar that contained shortcuts for frequently used programs, has been banished. However, if you really miss the little applet, you can add it back. Here's how to do it:

1. Right-click the taskbar and choose Toolbars --> New Toolbar.

2 . You'll be asked to select a folder for where the new toolbar should live. In the Folder text box at the bottom of the dialog box, enter this text:
%userprofile%\AppData\Roaming\Microsoft\Internet Explorer\Quick Launch
After you do that, click Select Folder. A link for the Quick Launch bar will be added to the taskbar. It will be on the right of the taskbar, just to the left of the Notification area.

It's not particularly useful docked all the way to the right with no application icons showing, so we're going to have to do a bit of work on it to make it useful. Right-click the taskbar and, in the pop-up menu, remove the check next to "Lock the taskbar." Now right-click Quick Launch and remove the checks next to Show Text and Show Title.

Once you've done that, drag the vertical triple dotted line next to the Quick Launch bar to the left until you expose its icons. To prevent further changes, right-click the taskbar and check Lock the taskbar.

You can now use the Quick Launch bar as you could in Windows XP and Vista, including adding icons to it and deleting them.

on Jan 12, 2010 | Computers & Internet

2 Answers

Error code 0xEA


Epson WorkForce WF 3640 mechanical issue during initial setup errors 0xF1...

says:

Print Error Code0xE3 and 0xEA

We have seen some success with this issue by following these instructions. Please try this procedure one more time using the instructions below.
  1. Turn the printer off, then disconnect the power and the interface cable. Open the cover and check for any torn or jammed paper and remove it.
  2. Reconnect the power cable and turn the printer back on.
  3. Press the Copy button and see if the unit responds.
Note: Also check that the ink cartridges and lids are pushed down fully.
If the issue persists, the hardware itself is malfunctioning and will require service

Oct 09, 2015 | Epson WorkForce WF-7620 Wireless Color...

1 Answer

Magic tool


You can use the Margue tool to cut a Rectangle or Elliptical shape. This is the tool with a dashed Rectanle on your toolbox. You can right click the Rectangle to reach the dropdown menu to select the Ellipse.

You can use the Lasso and trace carefully around the shape free hand, or the Polygon Lasso to trace around the shape. With the Polygon Lasso, you can click once to place and anchor then click again to draw another anchor with a line between that and the first. Repeat until you reach back to the first anchor.

You can use the Quick Selection tool to 'brush' over an area to select it. You can change the shape and size of the brush in the options. You can also set it to add to the selected area or retract from the selected area.

Finally, there is magic wand tool. You can click an are in the picture and it will select all surrounding pixels that are within a similarity threashold. You can change this threashold in the options at the top of the canvis. You can also choose whether you are adding to the selection or retracting, as with the quick selection tool.

Dec 02, 2013 | Adobe Photoshop 7.0 for PC

1 Answer

Power point blinking after shutdown


I suggest that you do a system restore to a time when the problem was still not there. TO do system restore, follow the following steps:
1. Windows Button or Start
2. Programs
3. Accessories
4. System Tools
5. System Restore
Select a date when the problem was still not there. Launch the restoration. Wait for it to complete the restoration.
Check if the problem is fixed. Please come back to me if there are still some issues.

David

May 26, 2013 | HP ProBook Computers & Internet

1 Answer

Problem is Acer Aspire 5738G's Easy Launch buttons are Stopped Working while Launch manager Application Working at background i decided to dissassemble the keyboard and the area which have power button etc...


The cable shoudl be fine. This is goignt o be a software issue. The cable more than most will nto just stop workign without prior truama. Put the system back together and uninstall then reinstallyour software for the buttons. reboot and allow the software to boot witht he OS.

If this does nto work you will need to look at other software first then replacing the cable etc.

Mar 08, 2011 | Acer Computers & Internet

1 Answer

How to cut a particular area in a given image quickly. For example in a image having a Horse in the grass field. I want only to cut the horse from rest of the image. How can I achieve this?


you can use pen tool to select by drawing around the image border perfectly and on joining the last dot and first .. right click and select make selection.. and drag it to another document

you can also use magic wand and tool to select th areas around the image and delete it
but using pen tool is the best way to get perfect cut..


hope it ll be helpful
comment and vote pls

May 18, 2010 | Adobe Photoshop 7.0 for PC

1 Answer

I have installed and unstalled the Futura software several times, have uploaded the Visat patch and still am getting a USB internal connection area. Now when I turn on the machine is has power but none of...


If you have sent troubleshooting report to futura-support and their reply didn't help, ask for remote session with support center. Otherwise launch troubleshooting utility and send its report to support. It is difficult to determine a root of the problem without info about machine model, software version, firmware version, pc configuration etc.

Nov 14, 2009 | Singer CE-200 Quantum Futura Computerized...

1 Answer

Installing acer launch tools in aspire 5920g model laptop


you need new installer windows and you need manual install you're recovery programs is corrupted..try to use new installer...

Thank You

Apr 03, 2009 | Acer Aspire 5920-6335 Laptop

1 Answer

Keep installing when launched


in the start menu there would be a diagnostic tool for MS Office under microsoft office tools named Microsoft office diagnostics... use that and it will tell u what the error is....

Feb 01, 2008 | Microsoft Office Professional 2007 Full...

Not finding what you are looking for?
Acer Aspire E700  PC Desktop Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acer Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18387 Answers

Mohammed Ebrahim M
Mohammed Ebrahim M

Level 3 Expert

586 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers

Are you an Acer Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...