Question about Konica Computers & Internet
I have an older Konica Minolta 2400W Color Laser. The print quality is not very good, a little light and streaky down the center portion of the page. I've replaced the drum and I've replaced the toner cartridges but that has not helped. Do you have any idea as to what the problem might be?
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
For troubleshooting "ghost printing" use "LaserJet 2200 repetitive defect ruler". Measure the distance of 'ghost' figure from the 'original'
Try this link:
Posted on Jan 05, 2008
Persever. Change your usb points, and at the last resort get the cord from your old printer and use this type of connection. Go slowly thorugh the disc step by step and make sure you delete any previous installations of the print file in the control panel.
Posted on Mar 01, 2008
SOURCE: Prints in black are poor quality
fist of all reunisall your printer driver ....
if problem dose not fix .
it means black colour laser section have problem so you can clean lens of laser if posible and replace laser secaner.
Posted on Apr 29, 2009
You may have some dust on the imaging window (printer head). Remove the toner cartridges and clean it with some tissues.
Posted on May 02, 2009
Tips for a great answer:
Feb 26, 2014 | Konica Minolta Office Equipment & Supplies
Jul 19, 2011 | Konica Minolta Magicolor 2530 DL Laser...
Dec 26, 2009 | Konica Color Stationary Workgroup Laser...
Jan 20, 2009 | Konica Minolta magicolor 2400 Laser...
80 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: