Question about Computers & Internet

1 Answer

Computer does not recognise camera - Computers & Internet

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 979 Answers

Hello sir, hi and good day, if you camera is not recognized by the PC, check if you have installed the correct device driver, there is a CD that comes with your camera, if you have installed the camera on the first time, and then now its not working, even the correct device driver is installed, then your Camera is defective, it may have loose wiring or open USB wire.
Check or try it on another PC and see if it will work. if not, buy a new one, its a much cheaper bargain that try to repair it. but if its on warranty, bring it to your dealer.

If your camera is built in your Laptop, check out the warranty from your dealer. if the warranty lapses, then it better to buy a USB webcam that have it repaired.

Posted on Nov 18, 2009

Testimonial: "Thank you for your response. I will try your suggestions and hopefully be up and running soon."

  • Jerry Umali Nov 18, 2009

    Oops sorry, than have it repaired

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My samsung S500 has suddenly stopped recognising the sd card


Try formatting the sd card IN the camera. Never format an SD card while it is in the computer.

Jul 22, 2016 | Samsung Digimax S500 Digital Camera

1 Answer

Am following the instructions regarding camera setup ( i have just bought a stylus-5010 camera) and having problems after charging the battery. The instructions say to execute Olympus Camera Initialization...


You most likely need to install the software that came with the camera before trying to connect the camera to your computer.
The software most likely came on a CD in the package with the camera.
If you no longer have the CD, you can download the software from Olympus

Dec 24, 2010 | Computers & Internet

1 Answer

Computer is not recognising camera when plugged


Try with a different cable.
Try and find the camera in the file manager.
Try a different computer. You might need a picture programme

Contact KODAK:
http://www.kodak.com/eknec/PageQuerier.jhtml?pq-path=14563&pq-locale=en_US&_requestid=3490

Nov 02, 2009 | Kodak EasyShare M873 Digital Camera

2 Answers

Conversion to CD


I have NV GS 47 video camera. Earlier I used to connect it to computer and write to CD. Now the computer is not even recognising it when connected. I bought a DV data streaming cable. That also is not working. Please help me Baig

Jul 09, 2008 | Panasonic NV-GS47 Camcorder

1 Answer

Computer won't recognise camera to download images


** Problem Solved **

I found it wasn't the camera entirely to blame. I tried another USB cable on another pc, and although the camera was doing the same thing as my problem, the computer recognised the camera as new hardware, and asked me how to access the pictures. So I was able to get the pictures from the camera to the computer, and then saved them on to my Kingston flash drive. So taking the flash drive to my daily PC, I plugged in my flash drive via a USB extension lead, and discovered that would read either... alarm bells rang. So I unplugged the lead, and put the flash drive straight into the computer direct. The computer recognised it immediately. So plugging in the extension lead again, and the flash drive, it read this now. So I tried the camera, and it recognised it.

So I don't know exactly what the problem was, but it was solved... saved me a lot of running around and money ;)

Feb 13, 2008 | Cameras

1 Answer

Will not transfer to computer


Does the computer after connecting recognises the Camera thru USB connection/ If the camera is not recognised please update the device driver bfor the camera. It should solve your problem.

Nov 19, 2007 | Nikon COOLPIX L3 Digital Camera

1 Answer

Camera not recognised when connecting to computer


playing the recorded dvd on your computer may be simpler , because your camera does not have a firewire connection for editing .

Aug 25, 2007 | Sony Handycam DCR-DVD201 DVD Camcorder

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

72 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...