Question about Polaroid Televison & Video

1 Answer

When you push a button on the remote, it either does nothing, or the channels start flipping all the way through from 2 to 120 and then start over. It is the same with the volume, if you hit it, it just keeps getting louder and louder and you can't stop it. If you push two numbers, it turns into six numbers...like 44 turns to 444444 but the channel does not change...

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

If it doesnt happen when you change the channel or volume on the tv itself then i would recomend getting a new remote. You could probably get one on ebay. Most manufacture remotes will work on all of their tvs.

Posted on Nov 18, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

How do i set the chanel to 3 so that i can hook up cable with out a remote


Most sets it is impossible and will skip channel 3 and input. You will need to buy a cheap universal remote.

Feb 27, 2015 | Sony FD Trinitron WEGA KV-32FS120 32" TV

1 Answer

Tv flipping channels itself


try cleaning your remote think buttons getting stuck
and clean remote eye on tv

Sep 26, 2013 | Philips Magnavox 27MS343S 27" TV

1 Answer

My Dell W3707C LCD TV won't quit flipping. The only button that works is the power button. I can hold the channel button down and flipping stops for about 2 minutes and then it starts flipping a


one of two basic things here, unplug set to see if after a while it helps, and if channel scanning up or down on its own suspect the button associated with the direction it changes is a bad one.

Oct 29, 2012 | Dell W3707C 37 in. LCD Television

1 Answer

Need intructions how to program remote control on vip722k second receiver


Press and hold down the SETUP button located on the remote. Wait until the INDICATOR light turns on. It will blink once the button is pushed, however once you see the indicator light stay one, release the button. Click the button to the DEVICE you wish to program. If it is a TV, then click the TV button. If it is the cable box, then click CBL button. After doing so, the indicator should still stay on. Press the DOWN CHANNEL button several times until you see the RECEIVER yo wish to program respond. Example: If it is a TV, then you will notice the CHANNEL change once the remote locates the correct settings for that receiver. If you see the receiver respond and you are pushing the down channel button but nothing is working, it means you passed the internal settings of the remote to the receiver. Try pushing the CHANNEL UP button slowly. It may be able to relocate the the proper settings. Once you see the channel change again, press ENTER to program the remote. If this fails, retry the same steps. In some cases you may miss the correct internal settings.

Nov 23, 2010 | DISH Network IR Remote Control

1 Answer

Ps3 will not start. no light on . its plugged in used it last week. Now nothing. Lights on remote flash when you push power button.


Im seeing this problem alot here is someone elses idea. I'd try a full power cycle, all firmwares are bit for bit the same so thats not your issue. Try flipping switch on back/unplugging/plugging back in/flipping switch/starting it back up.

Apr 15, 2010 | Sony Playstation 3 (PS3) Console

1 Answer

I tried the solution to the problem posted and my remotes still won't connect. what should i do now? the lights flash for a while then nothing happens. please help


Make sure you have fresh batteries. Next you need to synchronize the remote to the console.
The flip door in front, near the CD drive, there is a red button.
Each remote has a red button in the battery compartment.
Push the red buttons at the same time and they should start talking to each other.

Mar 12, 2010 | Nintendo Wii Console

1 Answer

RCA TruFlat 27F520T 27" TV Flipping Through Channels


Dear Friend,

All I can suggest is to take the back cover off, and look for signs of "Bulging caps" on the PSU and look for any "dry Joints"..

Remember the tube can hold a charge of 25,000v so if you touch it in the wrong place you will be able to defy gravity.

Aug 10, 2008 | RCA TruFlat 27F520T 27" TV

1 Answer

Remote won't work


reset the default setting go to menu button and manualy do this.....

Jun 19, 2008 | Sony Grand WEGA KDF-55WF655 36" Rear...

1 Answer

RCA 32" TV


The most likely problem is a stuck tact switch, if it goes up in channel number, 5, 6, 7, etc. then the channel up button is stuck, if it counts down it`s obviously the ch. down button. Problem is you have to remove the guts of the set to get at the control boards screws, you can try turning on the set and poke around the offending push button with a tooth-pick, if it stops changing channels leave it alone and use your remote from now on to change channels, if you can`t get it to stop the tact switches or the control board module will have to be swapped out, hope this helps

Nov 27, 2007 | RCA F32695BC 32" TV

1 Answer

Tv turns on manually, but auto flips through channels and you can't use remote


Found this in another forum (www.hometheaterspot.com) and it fixed my remote problem:

"...it's possible that one of the front panel buttons is "stuck" or shorted, and this could cause the TV to ignore commands from the front panel or remote. But this should also cause the Power command to be ignored, too. You might try pulling off the front panel and disconnecting the front panel buttons and then see if the remote works."

Oct 19, 2007 | Mitsubishi WS-65511 65" Rear Projection...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

111 people viewed this question

Ask a Question

Usually answered in minutes!

Top Polaroid Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74136 Answers

matt martin
matt martin

Level 3 Expert

1210 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Are you a Polaroid Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...