Question about Televison & Video

2 Answers

The tv was left on overnight and is in Standby mode. The TV will not turn on when the power button is pushed. The green power light blinks then returns to Standby.

Posted by on

  • 1 more comment 
  • lipyle Nov 18, 2009

    JVC HDTV LT-32DM20 AK

  • lipyle Nov 18, 2009

    Our JVC HDTV model LT 32DM20 was left on overnight. Now it is in Standby mode and won't power on when the power button is pushed.

  • lipyle Nov 18, 2009

    thanks. I already tried the power cord being unplugged. I'll try a local tech repair.

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,923 Answers

Try to turn off the projection TV and unplug the power cord from the wall socket. Leave it unplugged for 30 mins. and turn the TV back ON.

If same problem occurs, then the main power regulator could have gone bad. You need to consult a repair tech to estimate how much would be the cost of the part replacement.

Have a great day!

Posted on Nov 18, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,114 Answers

What type of projection TV? Make and model. If it's a floor standing model, it sounds like "STK" convergence chips or possibly a main board chipset. Reply with info and I can dig a little further.

Posted on Nov 18, 2009

  • Frank Fulton
    Frank Fulton Nov 18, 2009

    It's likely one of two issues; lamp is burnt or digital board burnt, or both. Those are the two most common problems. Hope this helps

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Green LIght Blinking


Does the led ever stop blinking? No ..well in that case generally this indicates a standby voltage problem...if all those voltages ok then the cuircit known as digital module is at fault. also make sure the lockout has not been activiated. i really dont think it could but to unlock hold menu button down for 10 seconds. After all that i believe it would be a bad digital module

Willie@fordtv.com

Jan 08, 2008 | Mitsubishi WS-55813 55" Rear Projection...

2 Answers

Sony Bravia KLV-40X250A power indicator blinks once but screen is black


um u should turn your tv off for like 10 minutes , i think yourr tv is a internet tv so let it cool sometimes sony internet tvs freeze with black screen so try it out.
good luck :)

Aug 06, 2012 | Televison & Video

2 Answers

Sony Triniton TV KV 32FS120 will not turn on


In standby mode (red led on/after the led stops from blinking), press "Display", "5", Volume (-)", "Power on" on the remote control in sequence, self diagnostic screen will be display, let me know the what is on the screen to diagnose where the fault came from.

Nov 25, 2011 | Sony FD Trinitron WEGA KV-32FS120 32" TV

2 Answers

My Sony Trinitron shut down last night. I


4 times standby light blink shows that tv got problem in vertical deflection section and probably vertical output IC got defective, need to be replaced.
Replacement of parts in circuit board requires soldering work and expertise so call local tv repair shop guy if you are not familiar with soldering work.
Thanks.

Jul 25, 2010 | Sony FD Trinitron WEGA KV-34HS420 34" TV

2 Answers

Sony kde37xs955 green light blinks 9 and red light blinks 6


hi..
It's in standby mode.
Do a reset and see what happens
While holding down the reset button on the remote
Press the power button on the tv
(The tv will turn itself off the back on)
Now release the reset button
It sounds like the lamp needs replaced....

thank u!!
rate me!!!

Apr 10, 2009 | Sony WEGA KDE-42XBR950 42 in. HDTV Plasma...

1 Answer

Kdf-60xs955 red continous blinking lamp light


It's in standby mode.

Do a reset and see what happens

While holding down the reset button on the remote
Press the power button on the tv
(The tv will turn itself off the back on)
Now release the reset button

It sounds like the lamp needs replaced.


Please rate this a fixya

Jan 22, 2009 | Sony Grand WEGA KDF-60XS955 60" Rear...

3 Answers

Green blinking light on Mitsubishi WS-55813 HDTV


generally this means a bad digital module.. as a techinican the first thing that we would check are what is know as standby voltages. if they were there we would replace digital module.! question. Does it blink for more than 70 seconds. This unit comes with a lockout feature. to unlock press and hold menu down for 10 seconds on front panel.

Jan 08, 2008 | Mitsubishi WS-55813 55" Rear Projection...

1 Answer

Power button blinking green


disconnect the power cord overnight try it if ok change power cord cheers

Dec 29, 2007 | Panasonic PT-40LC12 40" Rear Projection...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

72 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74459 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...