Question about Evenflo Jenny Lind Crib

1 Answer

I need 4 cross dowels,2 13/16 machine screws, and 2 plungers to reassemble my jenny lind crib

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

You can call Products America at 800-205-9642 or 800-772-1041. They offer a wide verity of hardware for many cribs.

Posted on Nov 18, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need assembly manuel for Jenny Lind 012614 where can I find it online?? Every website takes me to another I am very frustrated....didn't think it would be such a ordeal to locate a manuel online???? Is...


Evenflo Jenny Lind Crib has been recalled.

When you call to get the kit to fix the problem (800) 356-2229 you could ask Evenflo directly!

Here are instructions without a manual...

1. Lay the headboard on the floor in front of you with the bracket holes and model number facing you. Use 2 ¾-inch wood screws to attach the L-bracket and the latch bracket to headboard. The L-bracket has 3 holes and attaches to the holes on the lowest section of the headboard. The latch bracket only has 2 holes and goes directly beneath the metal bracket for the mattress that is already attached. It should face toward the center of the headboard. Once you're done, complete the same procedure on the right side of the headboard. Then do the same for the footboard.

2. Stand the headboard up so you can attach the rails to it. First, place the cross dowel (the small piece of wood with a hole in the side of it) into the hole on the underside of the top rung of the rail. Then put a second dowel in the top side of the bottom rung. Line the left rail up with the headboard at a 90-degree angle, placing it in the brackets you just installed, and insert a 2 13/16-inch machine screw into each of the 2 holes on the front side of the headboard (the side that will face outward). Tighten each screw with your screwdriver until it hits the cross dowel. Then turn the cross dowel clockwise to lock it in. Do the same for the right side and then for the footboard.

3. Slide the mattress platform (the bottom of the crib) into the stabilizer rails (easy to distinguish, since they are the same size as the sides of the platform), putting the longer ones on the sides and the shorter ones on the ends. It will slide in easily. Use 5 ¾-inch screws to attach the hanger brackets to the corners of the platform. The holes are predrilled and you can only put the bracket on one way to match them up, so there is little worry that you will attach it wrong.

4. Put the support brackets (the straight, flat ones) on top of the predrilled holes in the underside of the stabilizer rails. Screw them in with ¾-inch wood screws. Then place the hanger brackets in the slots that were preinstalled on the headboard and footboard. Choose the level that will suit you best. Evenflo recommends the top two for infants.

5. Snap a caster (the round disc) on the bottom of each foot of the crib. Check that all your screws are tight to keep your baby safe.

Jan 29, 2011 | Evenflo Jenny Lind Crib

1 Answer

Where to get dowels, screws and springs


Products America can help you with the hardware you are needing. You can contact them at 800-205-9642 or 800-772-1041 Monday thru Friday from 8am to 6pm CST. They will ask a few questions about your crib and possibly need measurements but should not have a problem getting you the hardware.

Oct 14, 2009 | Evenflo Jenny Lind Crib

1 Answer

We need plungers for Evenflo Crib!


We have an Evenflo Crib #0151615 - 060704. We are in desparate need of 1 plunger. Evenflo website no longer has them.Any ideas where I can find one?

Oct 13, 2009 | Evenflo Jenny Lind Crib

1 Answer

Need the screws for a jenny lind crib


call MDB parts in california 14-323-728+9988 x120 .  you will probably need part number, serial number and manufacturing date from the label inside the crib.

Sep 10, 2009 | DaVinci Jenny Lind Crib

1 Answer

IBOUGHT A JENNY LIND CRIB IN 1980. IS IT SAFE TO


sure, just do a good inspection, check for any looses screws or cracked pieces, repair if req. check for mold also if it was in damp storage, specially the mattress.

Jul 22, 2009 | Evenflo Jenny Lind Crib

1 Answer

Jenny Lind crib instructions...


Jenny Lind is a style of crib, not the mfg

DaVinci makes Jenny Lind...
http://www.milliondollarbaby.com/instructions

If you find your model, go to the Customer Care and click order parts

May 30, 2009 | DaVinci Jenny Lind Crib

2 Answers

HOW CAN I ORDERED REPLACEMENT PARTS. NEED THE CROSS DOWELS, PLUNGERS, MACHINE SCREWS AND WOOD SCREWS FOR THE JENNY LIND CONVERTIBLE CRIB


plungers are still available on evenflo site and instructions can be downloaded for free ! The screws and cross dowels may be available on woodpeck.com. I'm currently checking to see if the size is right.

Dec 24, 2008 | Evenflo Jenny Lind Crib

3 Answers

Jenny Lind Crib


model # 0161615 i need setup instructions

May 04, 2008 | Evenflo Jenny Lind Crib

3 Answers

Need screws to put baby bed back together (lost previous screws)


Simplicity for Children Ellis 4-in-1 Convertible Baby Crib
i lost all the screws and directions i need a new set does anyone know were i can any

Mar 24, 2008 | Evenflo Jenny Lind Crib

Not finding what you are looking for?
Evenflo Jenny Lind Crib Logo

Related Topics:

349 people viewed this question

Ask a Question

Usually answered in minutes!

Top Evenflo Baby Gear Experts

Shehu Pro
Shehu Pro

Level 3 Expert

1284 Answers

Rick Moore
Rick Moore

Level 2 Expert

66 Answers

Stitch85

Level 1 Expert

27 Answers

Are you an Evenflo Baby Gear Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...