Question about Konica Minolta magicolor 2400 Laser Printer

1 Answer

Konica Minolta 2400w

All of a sudden, a little circut board (1"x0.5") that is on the far right side of evry toner crtridge on this printer, came off the black toner. After that, the error light kept blinking alost once every second.

I then glued back the piece to the toner cartridge (its little screw had disappeared!). However, the printer status keeps saying that I should replace the toner. I had an extra blue toner, which I tried to put instead of the black one to see whether it would do the job, but I believe the prionter is smart to know that the toner is not black. At this time, I do not want to pay over $100 to see whether another black toner would fix the problem, becvause if it does not do it, I would be out of luck with the added cost.

Any hint would be greatly appreciated.
Farid

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 214 Answers

Compear the the C and K toner circut boards, maybe you have to but something under circuit board, so it reaches the reading mechanism. after making any changes turn off and on the printer.

good luck

Posted on Jan 11, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to deactivate toner colour errors?


if any toner ends in a printer, then replace it.otherwise error will show continuously.

Apr 22, 2010 | Konica Minolta magicolor 2400 Laser...

1 Answer

Konica minolta 2400w....lines verticle in all prints...what do i have to replace or clean to fix this problem


check its cartridge if lines are on the drum then replace the drum unit, if drum is clean then replace only the toner.

Apr 16, 2010 | Minolta magicolor 2400W Laser Printer

1 Answer

How to specify the appropriate media type in the printer driver with the Konica Minolta 2400W


Go to printer properties -> Printing Preference -> Paper -> Media Type

Reset your Toners and Imaging units for Bizhub and CF series.
http://www.chipreset.eu

Oct 13, 2009 | Konica Minolta magicolor 2400 Laser...

1 Answer

Replaced drum error light blinking


Start the Konica Minolta Status application on your PC and check the error, you should get more info there.

Reset your Toners and Imaging units for Bizhub and CF series.
http://www.chipreset.eu

Apr 14, 2009 | Konica Minolta magicolor 2400 Laser...

1 Answer

Konica Minolta magicolor 2400W: Not fusing on left side of paper


Take out the fuser again, double check that you havn't left any packaging in it etc. If not refit and try again, it may be a bad connection, if no good still I'd contact the supplier of the new fuser, looks like it's faulty.

Mar 23, 2009 | Konica Minolta Office Equipment & Supplies

1 Answer

Error light flashed when trying to print with Magicolor 2400W


Start the Konica Minolta Status application and check the error, you should get more info there.

Reset your Toners and Imaging units for Bizhub and CF series.
http://www.chipreset.eu

Jan 20, 2009 | Konica Minolta magicolor 2400 Laser...

1 Answer

Konica Minolta Magicolor 2400W drum cartrige-how to replace?


Did you buy a whole new drum unit, or just change the cartridge? If so, the fuse may still be blown. Also, you may need to empty the spent toner out of the old cartridge.

Oct 07, 2008 | Konica Minolta magicolor 2400 Laser...

1 Answer

Konica magicolor 2400W


To clear chip after refilling toner cartriage.
Go to "Tonerfillyourself.com" I bought refill toner and it includes a new chip and it's not hard to replace it. (Comes with instructions)

Apr 09, 2008 | Konica Minolta magicolor 2400 Laser...

1 Answer

Regular toner drag marks on printout


MACHINE DRUM UNIT, IMAGE BELT, AND TONER UNIT NEED TO BE REMOVED AND CHECKED AND CLEANED IF THEY LOOK GOOD THERE MIGHT BE A PIECE OF PAPER BLOCKING THE LASER SITE AREA INSIDE THE MACHINE IF ALL IS GOOD, CHECK THE FUSER FOR WOREN HOT ROLLER ,DIRT OR PAPER WILL BLOCK THE IMAGE TH THE PAPER

Dec 30, 2007 | Konica Minolta magicolor 2400 Laser...

Not finding what you are looking for?
Konica Minolta magicolor 2400 Laser Printer Logo

115 people viewed this question

Ask a Question

Usually answered in minutes!

Top Konica Minolta Office Equipment & Supplies Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6712 Answers

Adorjani Laszlo

Level 3 Expert

1297 Answers

carpediemweb

Level 1 Expert

47 Answers

Are you a Konica Minolta Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...