Question about Vtech 5.8GHz Cordless Phone with Digital Answering System
Get busy signal on vtech phone model cs5111-2 when push talk. I have unplugged phone and batteries and waited several minutes plugged everything back up and synchronized the handset with the telephone base. to no avail
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Not Registered
I had the same problem and this procedure fixes it! First, unplug the power to the main base (answering machine) for 20 seconds. Plus it back in. Put the phone that says "not registered" in the main answering machine. It will say "press the find handset for 4 seconds". Do that. It will run thru a series of stuff and will find the handset. It works! Rich (jambones.com)
Posted on Jun 01, 2007
I have the problem. I think it is because the battery i have in it was a Ni-MH and it should be a Ni-Cd. I am now looking for the right baterry Good luck Frank firstname.lastname@example.org
Posted on Sep 17, 2007
2/29 Have you registered or re-registered the handset?
"No link" can mean handset is not accepting radio wave of base unit. At Mfgr website pull-down operator's manual and look for registration instructions. Some sequence of buttons will create a radio signal from base (have handset off base) then another sequence of buttons on handset will accept radio signal. If handset has "menu" button, try "menu", then "00" (zero zero) then select an accept or "OK" button. Good luck.
Posted on Feb 29, 2008
from the troubleshooting section of the manual
• Unplug the base unit’s electrical power and remove the battery from the handset. Wait for 15 seconds then plug in the battery place the handset in the base unit and plug in the power. Allow up to one minute for the cordless handset and base to synchronize
not a guarantee, something to try
Posted on Aug 30, 2008
Tips for a great answer:
Jun 29, 2017 | Vtech Lands Phones
Apr 10, 2016 | Vtech CS5111 58 GHz 1Line Cordless Phone
Feb 10, 2013 | Lands Phones
Aug 10, 2011 | Vtech CS5111-2 Twin Phone
Jun 06, 2011 | Vtech CS5111 58 GHz 1Line Cordless Phone
Dec 12, 2008 | Vtech Lands Phones
Jan 09, 2016 | Vtech 5.8GHz Cordless Phone with Digital...
220 people viewed this question
Usually answered in minutes!