I cant seem to add new firmwear to my 1d mark 11

Confirming the firmware version:

1. Turn on the D80
2. Press the MENU button and select Firmware Version from the setup menu. The camera's firmware version will be displayed.
3. Turn off the D80

Basic Upgrade instructions: for detailed instructions, see pdf files below.

1. Download and expand the firmware files
2. Format an approved SD (Secure Digital) memory card in the camera
3. Connect Camera to computer (in MSC USB mode) or use a SD Card Reader
4. Copy to the top level of the card the downloaded "A firmware" file
5. Disconnect camera from computer
6. Update the firmware from the "Setup" menu
7. Follow the camera's on-screen menus
8. Repeat steps 2 through 7 using the "B Firmware"
9. Re-format Card

D80 1 11 firmware upgrade Nikon Knowledgebase

Update Camera Firmware.
CCTV Networking Technical Support

download and copy firmware relevant to the sd adapter card. there maybe an error (missing/corrupted file) with your previous version.
post more details if you need more help. :O)

The E99 message usually ends up being a shutter box that needs to be replaced. The 1D shutter box should be good for 100,000 images or more, you can probably find the estimated lifespan on Google somewhere.

If you can"t save pics to the CF card then you might have a bent or broken pin on your CF card reader. Look down into the CF slot, does it look ok?

We are an online digital camera repair shop but we haven't done any 1D cameras before.

Thomas D,
Owner; Darntoothysam com

you need to visit the manufacturers website and download the latest firmware and then get an sd card, copy the firmware to the sd card and then add freeware games and play ;)

Linda

www.xboxrepairkit.co.uk

Have you put the firmware onto the micro sd card aswell. You will need this so it will load the games.

If not go to www.ndstt.com
left click the DOWNLOAD tab along the top of the screen
Scroll down to TTMenu Kernel v1.17, 2009-01-06 new
There should be several languages listed click the English one
then click the save button on the pop-up box. (firmware version 1.17)

Save this to your desktop or where ever you like... Desktop is easier.

You will need to un-zip this file. Then all you have to do is copy the 3 programs onto the Micro sd card.
I would make a NEW FOLDER in there calling it games or something similar... just keeps it tidy.

Then copy the games into this folder.

This should sort your problem out.

Cheers Little Dish Fitter

Hi,
Hope this helps!

I wanted to add maps to my 250W. I found the maps I wanted on a Torrent. However, many searches around various forums never revealed how to install these. Found the following through reading and experimentation.

1. Downoaded map image file GMAPSUPP.IMG. Download also gave me "Use code XXX when generating unlock code for maps"
2. Downloaded Garmin Unlock Generator 1.3 by JetMouse
3. Looked on my GPS to find the UnitID
4. Entered the UnitID into Garmin Unlock Generator. Ignore the GM XT device unlock code and the top Generate button.
5. Selected Map Product as Custom and entered the code given for the downloaded image file.
6. Hit the bottom create button to generate a 25 digit code.
7. Download Img2Gps and run
8. Click Load Folder to load the image file. Select the tick next to it.
9. Check the Use Unlock Key option and paste the 25 digit code in.
10. Load a blank SD card into your Garmin
11. Connect the Garmin to your PC using a USB cable. You should see two dirves in windows: one is the Garmin and the other is the "Removable Disk" SD card.
12. Create a folder called "Garmin" on the SD card
13. Select Folder/Card in Img2GPS
14. Click "Copy Maps". Select the folder /Garmin on the SD card. You may need to click copy again.
15. Upload will take a while.
16. You should now see a file GMAPSUPP.IMG on the SD card in the /Garmin directory.
17. Create a new text file called GMAPSUPP.UNL in the same directory (make sure it does not have a hidden .txt extension).
18 copy the 25 digit unlock key into this file.
19. Close the file.
20. Disconnect the Garmin.
21. On Startup it should load your original maps and the new ones.

delete kernal and re install. good luck hope it works 4 ya

found solution to R5:
download latest firmware (1.19 at present) and unzip
format MicroSD to Fat or Fat32
Copy firmware onto MSD in this order ONE BY ONE !!!!!!
This step is very important!!!!
1. DS_MENU.DAT
2. _AXMENU.DAT
3. _DS_MSHL.DNS
4. _SYSTEM_ folder
5. moonshl folder
Then load your .nds files into the root.
I've had absolutely no problems with this card so far and if
installed correctly it works brilliantly!!!

use only the specified or recommended cf cards, I know ultra fast is not compatible to digicam two or more years older models.