Question about Asrock 775VM800 Motherboard

3 Answers

Can u help me?

Continous 3 short beeps but no display on monitor....i saw that the only processor fan works

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: can u help me?

Continous 3 short beeps but no display on monitor....i saw that the only processor fan works

Posted on Dec 04, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert whose answer got voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 118 Answers
Re: can u help me?

Some loose connection of vga card try to reinsert it

Posted on Feb 06, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has answered 1,000 questions.

  • Master
  • 1,226 Answers
Re: can u help me?

Check the video card of your system. if it is add on card , remove it and clean. if still error exist then maybe u need another VGA.

Posted on Jan 10, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

When the power does not give any beep motherboard D915GAV. Just connect your monitor to the built-in monitor video card does not work. I tried to connect the monitor is not the built-in video card as it...

If your motherboard does not give any beep and there is no display in your monitor this means there is a problem with your computer hardware. First thing you have to do is to check if the power supply fan is working, Then check thee processor fan if working too. If the processors fan did not spinning this means there is a problem with your memory or in your processor. Try to clean first the memory with a pencil eraser then put it back again to there slot. If the problem is still there then the problem is in your processor.

Sep 01, 2011 | Intel BLKD915GAVL (BLKD915GAVLX10U)...

3 Answers

What is the problem of my system board that have a five short beep and no display in the monitor?

Please tell me whats the make and model of the motherboard. The error code beeps are specific for a make of the motherboard

May 13, 2011 | GE Motherboards

1 Answer

Abit av8 bios post codes 8.3 - 8.6 - 9.c What is failing on boot ? I get one long beep followed by 4 short beeps. I have swapped video cards and reflashed the bios with no help. If I reboot 2 or 3...

I still did not find beep code that match your problem..

Anyways here are the common beep codes for your motherboard.. it might help you too.
1. No beep - no reaction, the mother board is dead, power supply problem, processor and or ram problem.
2. 1beep - board is working fine.
3. One long beep then it shuts down - cpu problem, your processor is not working or missing.
4. 1short beep - system boots normally
5. 2short beeps - CMOS setting error.
6. 1long 1short beep - dram error
7. 1long 2 short beep - video card or monitor not connected
8. 1long 3 short beep - keyboard error.
9. 1long 9short beep - ROM error
10. Long beep - memory card is missing or not connected
11. Short beep - power supply error
12 Four beeps - there is no fan detected on Fan1 or Fan2 header. make sure to attach or reset CMOS bios to factory setting.

Hope this gave you an idea of your problem..

Much appreciated if you rate this help..thanks..

May 23, 2010 | Abit AV8-3rd Eye Motherboard

3 Answers

I am getting three short beeps while booting

The beep codes below may help you identify the possible computer problems. However,
they are only for reference purposes. The situations might differ from case to case.
gAMI BIOS Beep Codes
*Computer gives 1 short beep when system boots successfully.
*Except for beep code 8, these codes are always fatal.
1 beep Refresh failure
2 beeps Parity error
3 beeps Base 64K memory failure
4 beeps Timer not operational
5 beeps Processor error
6 beeps 8042 - gate A20 failure
7 beeps Processor exception interrupt error
8 beeps Display memory read/write failure
9 beeps ROM checksum error
10 beeps CMOS shutdown register read/write error
11 beeps Cache memory bad
g AWARD BIOS Beep Codes
1 short: System boots successfully
2 short: CMOS setting error
1 long 1 short: DRAM or M/B error
1 long 2 short: Monitor or display card error
1 long 3 short: Keyboard error
1 long 9 short: BIOS ROM error
Continuous long beeps: DRAM error
Continuous short beeps: Power error

Nov 03, 2009 | Gigabyte GA-7VKML Motherboard

1 Answer

P4vm800 not working how to solve this probelom

Good day sir, hi, lets make sure first that your motherboard is good, so we need to test it, just prepare the folowing items.
  1. A good working power supply, to test: place a jumper wire across the green wire and any black(or sometimes the red with work) wire on the 20/24 pin power connector. Plug it and see if the exhaust fan run.
  2. A good set of Ram, just make sure its good. if not or in doubt buy new one (only one module) if you want. (you can keep the doubtful ones and test it later)
  3. A keyboard.
  4. If your motherboard has no VGA onboard, A good VGA card.
  5. A thumb speaker, or you can use your PC case speaker.
Okay lets assemble, on a table:
  1. Place your motherboard, (make sure no metals underneath) connect the Power Supply 20(or 24) pin to your motherboard and the 4 pin 12v connector. (if your motherboard has one).
  2. Connect the pc thumb speaker or your case speaker.
  3. connect the keyboard.
  4. connect the RAM, make sure it clicks as you install it.
  5. Optional VGA card. Onboard vga will do. Connect a monitor. plug in the monitor.
Okay, plug in your power supply, (exhaust fan is off at the moment) locate the power button pins, short them with a screwdriver. (fan is now on)

Now check your Keyboard. you will see two sets of lights, first set is Num Lock + Scroll Lock + Caps Lock, then a few seconds the second set: Num Lock only. at this point your motherboard is good.

Also check out the PC speaker beeps.
  • 1 beep mean good.
  • 1 long and 3 short beeps VGA is bad. (it may help if the VGA is snug and fit on the slot). If on board VGA, use a new AGP/PCIe card.
  • Continous long beeps. cannot detect memory
  • Continous short beeps, motherboard. (or memory sometimes).
  • No beep, fan is this point do everything again. (do it several times until the board responds)
Hope this helps you. feel free to ask again.

Oct 14, 2009 | Asrock P4VM800 Motherboard

1 Answer

No display on monitor

this lead to cpu overheating problem
clean your cpu fan and put some thermal grease between the fan and cpu

Jul 17, 2009 | Foxconn NF4K8AC-RS-1.0 Motherboard

1 Answer

Mother board no display

Looks like the lights are on? Fans spin? Sounds like the harddrives spinning? The power supply is bad. has just enough power to light lights, and spin fans, but not enough for the processor. (No beep sounds, because BIOS hasn't done a memory count. It's not going to)

ALL the lights use less than 1 Watt.
EACH fan uses 2 to 3 Watts.
The harddrive just sitting there spinning, uses about 5 watts.

Processors use 55 Watts to 125 Watts. Depends on the processor.
Not enough power to turn the processor on, the computer won't work. Computer isn't working there isn't anything to turn the monitor on. No Signal.

Apr 17, 2009 | Intel Motherboard

2 Answers

No Beep No Display

motherboard problem motherboard can't display when switch on, the cpu fan faster no beeping . I had change power supply, but same.Check the keyboard LED,Not flash.I had remove the ram but can't hear beep. PC speaker ok conferm. Monitor display tested monitor its ok . But no comming display. Can you help me? How i can solve this problem?

Jul 03, 2008 | Intel Motherboard

1 Answer

Continous Beeping sound

Hi neosw,

Could you provide a little more detail?

Was this a previously working set-up or is this a new build?

If this was a previously working set-up have you changed anything?

When you switch on the PC
  • do you see anything on the screen, does the monitor remain in standby?
  • are any of the fans running?
  • does the hard drive spin up?
  • does the beeping sound stop after a short while?
The reason I ask these questions is because a continues beeping usually means that the BIOS is not seeing the processor, or that the power to the processor is not correct. With some BIOS manufactures it can also mean the processor clock speed is not set

Please don't take this the wrong way but...if you provide greater detail in your question, the easier it for us to diagnose your problem, otherwise we can only make educated guesses.

I hope this has been of some help.


Spare head 2

Jan 06, 2008 | Soltek SL-K8AN2E (SL-K8AN2E-GR)...

Not finding what you are looking for?
Asrock 775VM800 Motherboard Logo

Related Topics:

330 people viewed this question

Ask a Question

Usually answered in minutes!

Top Asrock Motherboards Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers


Level 3 Expert

5660 Answers

Mark Taylor
Mark Taylor

Level 3 Expert

728 Answers

Are you an Asrock Motherboard Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides