Question about Linksys Computers & Internet

1 Answer

How do I do port forwarding with one static IP to put my address in my other computers . I need to shadow into with VNC after I install address on my computer is port forwarding marked on the menus are called something else? Linksys Router which one works with my request. Do these work on Fios network just as well.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 10,406 Answers

Find the IP-address of the computer that you want to accept VNC connections.

Access the router's web-interface.
Find its web-page for "port-forwarding".
Define 'TCP' port '5900' to be forwarded to the IP-address that you found.
Save the settings, and restart your router.

Hopefully, Verizon's FIOS network does not "block" all 'TCP:5900' traffic.

Posted on Nov 17, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HOW TO PORT FORWARD ON SR350N ROUTER?


first, configure a static IP address on your computer.
second, setup a static IP address for Windows 7, Windows 8 http://setuprouter.com/router/smartrg/sr350n/ip-address.htm
third, login To The SR350N
last, Navigate to the Port Forwarding section
and make some changes i recommend according to experts 1-855-383-7238 .

Mar 10, 2014 | Computers & Internet

1 Answer

Im trying to open the ports "3784, and 6100" for Ventrilo and i can not get them to work.


you will need to setup your computer for a static ip address.
p.p1 {margin: 0.0px 0.0px 0.0px 0.0px; font: 12.0px Tahoma} p.p2 {margin: 0.0px 0.0px 0.0px 0.0px; font: 12.0px Tahoma; min-height: 14.0px} span.s1 {color: #05aef0} span.s2 {font: 12.0px 'Lucida Grande'}

Click the Security link near the top of the page.


Click the Applications & Gaming link near the top of the page.

You should now see a new menu. In this new menu, click Port Range Forward.


Enter the name of the program into the Application box. It doesn't really matter what you put into this box, but something that will remind you why these ports are being forwarded would be a good idea.

If you are forwarding a single port, enter that port number into the Start and the End boxes. If you are forwarding a range of ports, enter the lowest number of that range into the Start box. Then enter the highest number of that range into the Endbox.

Use the Protocol drop down box to select the protocol type of the ports you are forwarding.

Enter the ip address to forward these ports to into the IP Address box. If you are forwarding ports so you can run a program on your computer, you should enter your computer's ip address into that box.

Put a checkmark in the Enable checkbox.

When you're finished, click Save Settings near the bottom of the screen to save your changes.

And that's it! You're done!


http://portforward.com/english/routers/port_forwarding/Linksys/WRT54G/

Mar 20, 2011 | Linksys WRT120N Router

1 Answer

Port forwarding for model number F7D5301


To setup port forwarding on this router your computer needs to have a static ip address. Or you can take alook at our Static IP Address guide to setup a static ip address. When you are finished setting up a static ip address, please come back to this page and enter the ip address you setup in the Static IP Address box below. Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser. If you do not know your routers internal IP address please read our How To Find Your Routers IP Address guide.

The address bar has http://www.fixya.com/AnswerQuestions.aspx#top in it. Just replace all of that with the internal IP address of your router. By default the IP address should be set to 10.1.1.1.

We do not currently know the default username and password for your router.
Click the NAT button near the left of the page.
You should now see a new menu. In this new menu, click Port Forwarding.
Enter the name of the program into the Description box. It doesn't really matter what you put into this box, but something that will remind you why these ports are being forwarded would be a good idea.
Enter the port to forward into the Public Port and the LAN Port boxes.
Use the Protocol Type drop down box to select the protocol type of the ports you are forwarding.
Enter the ip address to forward these ports to into the LAN IP Address box. If you are forwarding ports so you can run a program on your computer, you should enter your computer's ip address into that box.
Put a checkmark in the Enable checkbox.
When you're finished, click Save Setting near the top of the screen to save your changes.

And that's it! You're done!

Feb 05, 2011 | Belkin Basic Wireless Router

2 Answers

How to forward website to belkin n1 vision router


You would have to log into the router to configure port forwarding on port 80. You would have to know the IP address of the computer hosting the website and put that in the routers config under port forwarding.

Oct 27, 2009 | Belkin N1 Vision Router

2 Answers

How do I portforward my GT704WG to UDP 5198 and 5199?


It is important in order to setup port forwarding on your router that your computer has a static IP address assigned. Port forwarding will not work properly without. If you don't know how to do it, look at this guide for different operating systems (or come back here and leave a comment with your operating system details and I walk you through the steps.)

Once that is done, open a web browser and enter the IP address of your router in the address bar. the default IP address should be 192.168.0.1.

  1. When you are logged in, click the Setup / Configuration link.
  2. Then click the Advanced Setup link in the left panel of the page.
  3. Click the Begin Advanced Setup button.
  4. Click the Port Forwarding link in the left panel of the page.
  5. Enter the values 5198 and 5199 in the IP Port Range fields.
  6. Select UDP from the drop-down menu and the static IP address of your computer in the IP Address field.
  7. Click Add.
  8. When you have entered all ports you want to forward, click Save and Restart in the left panel of the page to save your changes.
If you have any more questions, just come back here and leave a comment - I'm happy to help.

Aug 18, 2009 | Actiontec GT704WG Wireless Router...

1 Answer

Ftp - port forwarding


Hello.. If you already have the port numbers needed and static IP on your computer, you can do the following steps to open them on your router:

1. connect a computer to the router wired.
2. Launch an internet browser and type in http://192.168.2.1. Use the user name and password that you have set for your router.
3. Click on the Firewall tab, then Port Forwarding
4. For the Protocol, specify if the port you will open is TCP or UDP.
5. Set the port numbers on both WAN and LAN port range then set the Static IP address on the textbox then click add. After doing that, check if you have an apply,save or ok button and click on that.

Here is the site for the user guide of your router.

If you do not know how to set a static IP on the computer, you can do the steps from this link. This depends on the operating system of the computer you are using. Make sure to set an IP address in the range of 192.168.2.x (x being a number from 2- 200).

Jul 30, 2008 | U.S. Robotics USRobotics USR5461 Wireless...

3 Answers

Utorrent downloads with WRT54GL?


Before we can forward ports for Utorrent, we need to figure out what ports Utorrent is using. Here is a brief walkthrough on how to do that. Go ahead and open up Utorrent.
utorrentmainmenu.jpg

Click Options in the menu at the top of your screen. In the list that drops down click Preferences.
utorrentnetworkoptions.jpg

Click Connections on the left hand side of the Utorrent program. You should now see the menu shown in the screenshot above. Make sure the Enable UPnP box is unchecked. The number in the Port Used for Incoming Connections box contains the port you need to forward. You can change the port number, if you want to. Please enter the port you chose into the box below.
Utorrent's Port for incoming connections To setup port forwarding on this router your computer needs to have a static ip address. Take a look at our Static IP Address guide to setup a static ip address. When you are finished setting up a static ip address, please come back to this page and enter the ip address you setup in the Static IP Address box below.

Do not skip this step! Please enter the static ip you want to forward to: 192.168.1.
wrt54gl0.jpg

Open a web browser like internet explorer or Netscape. Enter the ip address of your router in the address bar of your browser. In the picture above the address bar has http://www.google.com in it. Just replace all of that with the ip address of your router. By default the ip address should be set to 192.168.1.1.

wrt54gl1.jpg

You should see a box prompting you for your username and password. Enter your username and password now. By default the username is blank, and the password is admin. Click the Ok button to log in to your router.

wrt54gl2.jpg

Click the Security link near the top of the page.

wrt54gl3.jpg

Remove the checkmark from the Block Anonymous Internet Requests checkbox.
Click the Save Settings button near the bottom of the page.
Click the Applications & Gaming link near the top of the page.
You should now see a new menu. In this new menu, click Port Range Forward.

wrt54gl4.jpg

Port Range Application Start End Protocol IP Address Enable To Both 192.168.1. We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Utorrent requires you to forward the ports you entered above. Go ahead and enter the settings shown above into the Port Range Forward menu.
When you're finished, click Save Settings near the bottom of the screen to save your changes.

And that's it! You're done!

Feb 21, 2008 | Linksys Wireless-G WRT54GL Router

1 Answer

Port forwarding


What is the manufacturer of your router so I can get a user guide and taylor the instructions if needed?

Generally I would statically address the device to be forwarded to. If your router address is 192.168.1.1 and Subnet mask of 255.255.255.0 and it's DHCP server controls address 192.168.1.100 for 50 leases to 192.168.1.149 then consider using the range 192.168.1.2 - 192.168.1.99 uniquely as static IP addresses. There are more starting at 192.169.1.150 but let's ignore them for now. In the network adapter to recieve port forwarded content assign a static IP address based on the above as say 192.168.1.15 with a subnet mask of 255.255.255.0 and a default gateway of 192.168.1.1. The DNS addresses should also be static however depending on your router there may be an option. Some routers allow their address to be entered as the DNS address and pass requests as appropriate to the DNS servers loaded in their lan configurations, otherwise you will enter your ISP supplied DNS addresses into the network configuration.

Now that we have established a stable IP address to forward the port to we need to tell the router everything it sees for port 5060 gets forwarded to IP Address 192.168.1.15 port 8000. If detailed instructions are needed I will need to know the manufacturer and model of your router.

Please provide the additional information and any questions in a response to this problem and I will respond when available.

Dec 25, 2007 | Computers & Internet

1 Answer

Static ip address


It is a ADSL Modem. It should have all ports open. In order to set a EXTERNAL static Ip address, you would have to call up your ISP and ask for a static IP address.

Aug 25, 2007 | Siemens SpeedStream 4200 (13A4200001)...

1 Answer

Port Forwarding


Port forwarding is a method that allows you to run a server behind the router. Port Forwarding opens a specific port to a computer behind the router, allowing all Incoming Traffic on that port to be sent directly to that server. It should be used to setup servers behind the router, typically Port Triggering (Answer ID 344) is a better choice for non server applications (Such as instant messengers and game servers). Below is an example of how to setup Port Forwarding. For our example we will be setting an FTP Server and a Mail Server that uses SMTP and POP3. FTP uses ports: 20 and 21 SMTP uses port: 25 POP3 uses port: 110 Getting Started 1. You must set a static IP address on the server. If you're unsure of how to do this please go to Answer ID 534 for information on setting a static IP address in Windows. 2. Once the static IP address has been assigned please go to your desktop and double click on Internet Explorer (Located on the Start Menu in Windows XP) 3. Once "Internet Explorer" opens, please type http://192.168.1.1into the "Address Bar" and click GO 4. The "Enter Network Password" window will appear. Skip user name and type admin (admin is the default password) as the password, and click OK 5. This will bring up the routers "Setup" section. Look under "Domain Name" and check what version of the firmware you're using. 6. You will need to click on the Advanced tab to the very right. Once the "Advanced" tab comes up please go to the Forwarding tab. Firmware prior to 1.32 This will not work with firmware prior to 1.32 Firmware between 1.32 and 1.36 Service Port Range 20 ~ 21 25 ~ 25 110 ~ 110 IP Address 192.168.1.3 192.168.1.3 192.168.1.3 Firmware after 1.36 up to 1.40m Service Port Range 20 ~ 21 25 ~ 25 110 ~ 110 Protocol Both Both Both IP Address 192.168.1.3 192.168.1.3 192.168.1.3 Firmware after 1.40m Customized Application FTP SMTP POP3 Service Port Range 20 ~ 21 25 ~ 25 110 ~ 110 Protocol Both Both TCP IP Address 192.168.1.3 192.168.1.3 192.168.1.3 Finishing up Click Apply, then Continue Restart your computer

Feb 16, 2006 | Linksys EtherFast Cable/DSL Router

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

338 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18387 Answers

Are you a Linksys Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...