Question about Kenmore 24032\24036 Top Load Washer

1 Answer

Lid lock not on, and machine is not going through

Kenmore Top Load Oasis II, Washing Machine.........Lid lock not on, and machine is not going through the cycles. It sounds like bolts are rattling around inside, but the drum does not move. There is a small load in the wash. It stopped going through the spin cycles, so I have about five inches of water sitting in the drum after I rung out the clothes that were in there.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

On this washer, the dl code indicates a failed lid lock mechanism. Pressing pause/cancel should reset the controls.

You may have to unplug the unit for 20-30 minutes, then restore the power.

If that doesn't work, the only other solution would be to replace the door lock assembly.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Posted on Sep 30, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My Kenmore Elite Oasis washing machine has error code "UL" while in rising cycle and stop. Can you tell me what is the problem and how to solve it.


My Kenmore Elite Oasis washing machine will drain but not spin and it keeps jumping back and forth to different time cycles. It continually reads "UL" and I keep trying to adjust and balance the load but it does not help.

Jun 25, 2011 | Kenmore Elite Oasis 27052 Top Load Washer

1 Answer

My Kenmore Elite Oasis HE model number: 110.27072603 washing machine shows LID error code. It wont work at all.... went half way through cycle... help.


Greetings,
this washer has a lid switch problem...or possible main board failure, but lid does concentrate on the lid safety switch. If you remember when you open the lid it stops..well, its a safety feature and prevents tub from spinning with lid open...this one is more difficult to service if your not use to working on washers...try unplugging machine and leaving off for awhile...does the door lock? check switch for lid fault

Nov 25, 2010 | Kenmore Oasis HE 27082 Top Load Washer

2 Answers

Lid does not lock will not take cycle instructions


Kennmore Oasis washer; I just replaced the lid locking mechanism (8563937) with the upgrade (W10059230) from www.midwestapplianceparts.com

Jul 29, 2010 | Kenmore Oasis HE 27082 Top Load Washer

1 Answer

Du error code on a kenmore elite oasis he what does it mean and what can i di to fix the problem


Door unlock failure
Excessive force on door lid is preventing lock bolt from
retracting.
Wash media buildup is preventing lock bolt from retracting.
Machine/motor control cannot determine if door lid is in an
unlocked state. See TEST #8, page 14

Jun 11, 2010 | Kenmore Elite Oasis 27052 Top Load Washer

1 Answer

The lid lock is broken, can it be unhooked, machine will not engage with lid unlocked.


Following is the Whirlpool service manual for their Cabrio washer, basically the same as the Kenmore Oasis.

It has a troubleshooting section as well as diagrams and instructions concerning the Lid Lock.

https://secured.whirlpool.com/Service/SrvTechAdm.nsf/2cd44500d572193285256a45004fd9d6/409753510a90c8be852571e90073421b/$FILE/8178583.pdf


Oct 25, 2009 | Kenmore Oasis HE 27082 Top Load Washer

1 Answer

LOUD RATTLING NOISES ON SPIN CYCLE (SOUNDS LIKE MONEY OR MARBLES IN MACHINE)


you'll need to investigate further. It may even mean bringing in a professional to be sure the vibration damper rods are ok - to prevent future and costlier problems.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Jun 01, 2009 | Kenmore 4.5 cu. ft. Oasis Canyon Top Load...

1 Answer

Very Noisy Operation


you will have to access the bottom of the agitator from the back of the machine. Either you have loose bolts or else you agitator bearings are shot

Jan 28, 2009 | Kenmore Elite Oasis 27052 Top Load Washer

1 Answer

My kenmore elite oasis runs fine but wont go through spin cycle


Try replacing the motor coupler between the motor and pump three small pieces about 18.00 dollars at sears parts store.

Jan 13, 2009 | Kenmore 23822 Top Load Washer

1 Answer

No display on Kenmore Oasis


there should be a repair manual inside the machine. If you use a screw driver in the front to open the top of the machine the manual should be on the inside of the front panel.

Oct 13, 2007 | Kenmore Oasis HE 27082 Top Load Washer

Not finding what you are looking for?
Kenmore 24032\24036 Top Load Washer Logo

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Sal DeAngelo

Level 3 Expert

2128 Answers

fordexpert

Level 3 Expert

5501 Answers

Mike Carew

Level 3 Expert

969 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...