Question about New Balance 1400 Treadmill
Could be. If you had to take it apart, I would definately check the wire harness connection. Also if there are bolts that were removed, check to make sure none of those pinched the harness when reassembling.
Posted on Nov 17, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Error 1 - Start up error. This is caused because the belt was commanded to move and the opto (speed sensor on the motor) has not seen any movement or the belts movement was interrupted prior to it reaching its commanded speed. To fix Verify opto operation in Diagnostics, Motor Test
Mode, Section 2. Verify DC voltage at connector P6 pins 1 and 2. Verify that LED 4 on the Motor Controller flashes as the motor moves. Let me know if you need any more help. Fitness Fix-It
Posted on Mar 24, 2010
Tips for a great answer:
Mar 04, 2014 | Life Fitness Lifefitness 4000 Treadmill...
Feb 08, 2014 | Life Fitness T3 Treadmill with Advanced...
May 04, 2012 | Life Fitness Exercise & Fitness
May 04, 2012 | Life Fitness T3 Treadmill with Advanced...
Jun 12, 2010 | Life Fitness T3 Treadmill with Advanced...
Feb 17, 2010 | Life Fitness T3 Treadmill with Advanced...
Jan 13, 2010 | Life Fitness T3 Treadmill with Advanced...
656 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: