Question about Kenwood EZ500 CD/MP3/WMA Receiver

1 Answer

Security code not working

My security code isn't working when i type it in so i have no clue how to get access to my radio so what do i do?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,512 Answers

Y this

KENWOOD SECURITY CODE CLEAR procedure


Your radio will require one of the following procedures.

Type 1
During the code request mode, while holding the DISP key depressed, press and hold the Volume UP or DOWN key for 3 seconds (so that “…” disappears).
Then using your remote enter your code.

Type 2
Press the "Auto" button and "Track up" on face of radio at the same time. The four dash lines ( . . . . ) should "disappear".

Then using your remote enter your code.

Type 3
Model# DPX-4020 and DPX-4030
Press and hold the 1 then the 6 preset key (preset keys are the buttons on face of radio for storing you "favorite" radio stations). "C" should display.
Then using your remote, enter your code.


Enter your number from the remote control unit. Your code number is 5227 (KCAR)

* Press numeric key “5” ( 2 times ) and press the Track UP/Next Track key
* Press numeric key “2” ( 3 times ) and press the Track UP/Next Track key
* Press numeric key “2” ( 1 time ) and press the Track UP/Next Track key
* Press numeric key “7” ( 2 times ) and press the Track UP/Next Track key

The security is canceled and the set enters the TUNER mode!

Posted on Jan 13, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Needing a radio security code


We have no clue try a dealer .

May 31, 2018 | Cars & Trucks

1 Answer

Help


Your first clue to going wrong with the repair is that the relay with two extra pins was the wrong type! So you need to look at the old one and read the ratings on it and search the net for one that does match it with the correct number of pins.
As for the resistors you need to read the colour code of them and again search for something the same size. The colour code will tell you the type you need. If you don't know how to read the colour code search on the net for a resistor colour code calculator.
As they look bad I would replace them, even if they did work, they could go dead later.

Jul 26, 2013 | Alesis RA-150 Amplifier

1 Answer

Please code for ford radio m010499


Dealer Only

That is a security code that isn't
known & shouldn't be ---but hundreds
of people keep asking every day

You do not need a radio code on all
Ford Products,ask the dealer & bring
proof of ownership & Vehicle Vin #

Oct 06, 2012 | Cars & Trucks

1 Answer

Anybody have the code for Becker radio CDR-22 Type 4467 Seri X5020987 please?


We do not have anti-theft radio codes, they are stored on the factory database and we do not have access to that system, it is secure.

Apr 03, 2012 | 2000 Porsche Boxster

1 Answer

What's your problem?have a problem with security code. The stereo cannot work without the access code. Can anyone help me please? Is there a universal security code? Thank you muamar m. pontino


No there's no universal security code. First, check your car user guide and your radio user guide if you have one, see if the code has been written down in the back somewhere.

or

There are usually plenty of Auto electronic engineers / fitters who provide this service. Have a look in the phone book for one near you.

They can also be cleared on line:- http://www.radio-code.co.uk/
or :- http://www.sws-solutions.co.uk/radio_coverage.php

Finally, you could google "Car Radio Codes" see if there's a site you prefer.

Jan 30, 2012 | Car Audio & Video

1 Answer

The console indicates Enter Security Code ..... it


I'm having the same issue. did you get an answer?

Sep 09, 2010 | 1985 Mercedes-Benz 190

1 Answer

Eurovox radio/cd stacker in 1998 Holden Astra locked


Radio lock out codes are security related to discourage theft, so they are not published on the internet, if they were what would be the point?? any thief could get the code after stealing your radio. Contact the dealer for instructions and what info u need to get your cars unique radio code. How do I know this isn’t a stolen radio? The dealer will require the serial number off the radio and proof of ownership of the car it came from.

Sep 16, 2009 | Car Audio & Video

1 Answer

Access to password


yas thats encryprion key it is set for your internet security.
http://192.168.1.1
or http://192.168.0.1

try both this link it is default ip for access router.
but if this ip not works then u must have to reset your router with reset switch it in back side of your router.
thewn u can access router with this link.
then it propmts for user name and password.
then user anme: "admin"
paasword :"admin"
or
reamin pasword blank.
then u got some menu.
go to advanced security then u se encryption code.it is which u prompt when u connect your wi fi internet. ceck those pasword and type wehn u coonect yourinternet .
thats it.

Dec 29, 2008 | NetGear DG834G Router

6 Answers

Becker Car Radio Security Code Unlock


The best way that your gonna find it is by checking out the dealership, they can help you with that

Dec 28, 2007 | Infinity Reference 1211a Car Audio...

1 Answer

ACCESS/SECURITY CODE


KENWOOD SECURITY CODE CLEAR procedure


Your radio will require one of the following procedures.

Type 1
During the code request mode, while holding the DISP key depressed, press and hold the Volume UP or DOWN key for 3 seconds (so that “…” disappears).
Then using your remote enter your code.

Type 2
Press the "Auto" button and "Track up" on face of radio at the same time. The four dash lines ( . . . . ) should "disappear".

Then using your remote enter your code.

Type 3
Model# DPX-4020 and DPX-4030
Press and hold the 1 then the 6 preset key (preset keys are the buttons on face of radio for storing you "favorite" radio stations). "C" should display.
Then using your remote, enter your code.


Enter your number from the remote control unit. Your code number is 5227 (KCAR)

* Press numeric key “5” ( 2 times ) and press the Track UP/Next Track key
* Press numeric key “2” ( 3 times ) and press the Track UP/Next Track key
* Press numeric key “2” ( 1 time ) and press the Track UP/Next Track key
* Press numeric key “7” ( 2 times ) and press the Track UP/Next Track key

The security is canceled and the set enters the TUNER mode!

Nov 10, 2007 | Kenwood DPX-5010 CD / Cassette Player

Not finding what you are looking for?
Kenwood EZ500 CD/MP3/WMA Receiver Logo

Related Topics:

341 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenwood Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4962 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

yadayada
yadayada

Level 3 Expert

80339 Answers

Are you a Kenwood Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...