Question about Ge Medical Systems Ge Marquette Mac 1200 Interpretive Ecg

1 Answer

GE MAC1000ekg not printing clearly . My EKG machine is recording the EKG well but when I print it comes out very faded.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 71 Answers

The heat on the print head can fade over time giving you a poor print. also the feed roller can wear and give poor pressure to the print head. thw way to diagnose it is to put a peice of electrical tape on the print roller and print an ekg. if it prints well in the area where the tape was, it is the print roller. if there is no change it is the print head.
wats@mesasales.com. www.overstockme.com. Jeff Watson

Posted on Jan 01, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to load paper


How to load paper - Fixya

www.fixya.com > Forum > EKG/ECG Machines
39 mins ago - How to load paper - EKG/ECG Machines question. ... Machines. Open Question ... Aug 30, 2012 ' Schiller Cardiovit At 2 Light Ecg Machine.

Loading paper into the MAC 1200 ecg machine - Fixya

www.fixya.com/.../t4590309-loading_paper_into_mac_1200_ecg_mach...
Apr 19, 2010 - loading paper into the MAC 1200 ecg machine how to load the paperinto the machine? ... Ge Medical Systems Ge Marquette Mac 1200 question.

Contec ECG Monitor & pulse oximeter Ekg printed sheet ...

www.hcuck.com/search/p1207318-contec_ecg.../ekg_printed_sheet
Question about Ge Medical Systems EKG/ECG Machines ... Open the . ... ...ekg-manual The paper is is backwards, there are 4 ways to load paper BUT only 1 ...

Electrocardiograph (EKG / ECG) Questions and Answers


Dec 21, 2015 | Medical

2 Answers

ECG MAC 1200 does not print leads III, aVF, V3 and V6, although they are shown on screen


I would reset the machine to factory defaults. Leads to be printed can be manipulated but the factory setting is to print a full 12 lead.

settings-> system setup-> restore defaults-> yes -> hit start until you are back at the main screen and hit print again ( to get a print out)

If it still wont print all 12 leads call us: Discount Cardiology 800-507-8244

Sep 05, 2012 | Ge Medical Systems Ge Marquette Mac 1200...

2 Answers

Our MAC 1200 ekg machine prints out 1 empty sheet prior to printing the actual ekg. Is there a way to eliminate that first page? It wastes a ton of paper. thanks, Dan


hi,


1.Press the setup Button
2.Select operating mode and press enter.
3. Repatedly perss the down arrow until it reaches to the "START AT QUEUE MARK" and perss enter. Then select NO and press enter ( if it is selected Yes then before each recording the recorder advance the paper to the beginning of the next page)
4. Press the Start button to exit the setup.
From the next EKG it will print from the first page.
ok

Aug 09, 2011 | Ge Medical Systems Ge Marquette Mac 1200...

2 Answers

I have EKG machine GE MAC 1200. I change the paper now it is not printing with new paper. What should I do?


Our EKG machines at work have specific paper that will only work with them, are you using the same type as before? Also, it is possible to put the paper in upside down and it will not print on that side. Have you tried to turn the paper around? Good luck

Apr 26, 2011 | GE Medical

1 Answer

The ECG machine expels the paper but with no ecg record on it, please advise?


hi,
Your machines thermal printing head have some problem. Thats why it doesn't print any thing on the paper. Not possible to repair thermal head. You have to replace it with a new one..
ok

Feb 17, 2011 | Schiller Welch Allyn Cardiovit At 2...

1 Answer

I think that the ink on my GE Mac 1200 EKG has run out. How do I replace it? Where can I get ink?


hi,
it doesn't uses any ink. printout is given by a thermal printer on wax or chemical paper. if print out is not coming ,then there may be possibility of the thermal printer head become damaged.
also check the battery .
ok

Dec 07, 2010 | Ge Medical Systems Ge Marquette Mac 1200...

1 Answer

EKG machine not printing


I would need a little more info to be more exact but there are a few usual causes for this issue. Bad feed roller (you can here it spinning but paper does not move), bad optical sensor (a faint click, very little paper movment), wrong paper (same as bad optical sensor or might just continue to cycle through paper without printing), bad print head (system acts just like it does when it is printing normally but nothing appears on the page) or bad battery (system tries to print but shuts down almost immediatly even if it is plugged in). You can contact me and give me more info and I would be happy to help.
wats@mesasales.com or www.overstockme.com or follow us on twitter at overstockmecom

Sep 01, 2010 | Ge Medical Systems Ge Marquette Mac 1200...

1 Answer

We have a GE MAC1200 EKG that will only print once. The unit gets stuck (will not print - just continues to analyze) when a 2nd ekg is attempted to be printed. If the the unit is unplugged, then the unit...


The battery is weak. Disconnect the AC, battery,& then replace the memory battery. Reconnect the power battery & AC. Next is a pain in the rear, reprogram the unit; date, ID, setup, ect.

Apr 19, 2010 | Ge Medical Systems Ge Marquette Mac 1200...

1 Answer

I ahve a schiller welch allen EKG machine, and now it only prints


If it stops printing completely in the middle of doing the print, it is because the battery is bad and needs to be replaced.
If it only prints some of the leads but it does print the full report it is because you have the leads mixed up (Wrong spot on the patient) or the leads are mislabeled or some of the clips or electrodes are bad.
I can fix these. Let me know if you need help.

Apr 05, 2009 | Schiller Welch Allyn Cardiovit At 2...

1 Answer

Marquette MAC 6 EKG machine prints extra pages before and after report. Any suggestions?


You are using the worng paper. Cross refrence the paper you are using with the correct number.

Mar 19, 2009 | Ge Medical Systems Ge Marquette Mac 1200...

Not finding what you are looking for?
Ge Medical Systems Ge Marquette Mac 1200 Interpretive Ecg Logo

345 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ge Medical Systems Medical Experts

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Steven Clarke
Steven Clarke

Level 2 Expert

222 Answers

ka4iup
ka4iup

Level 3 Expert

3957 Answers

Are you a Ge Medical Systems Medical Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...