Question about RCA D52W20 52" Rear Projection HDTV-Ready Television
While watching tv - the colors went out of alignment with each other. What could be the issue? We have turned off and turned back on after 5 min
my rca 52 in has the same problem. but seems to not auto converge . and even when i manuel converge the screen is still looks like a 3 d movie.
i have tried every thing.. and its only a year old..
On this particular model when your convergence is out of alignment, and the auto convergence is suddenly missing from the TV's menu all together, there is a easy fix.
Diode on Main Power supply, Location dl321 and fuse at Location fl231.
This problem has a high failure rate.
Posted on Jun 04, 2008
I have replaced the fuse fl231 When I plug the set in, I get the power light on the front of the TV comes on and then in about 2 sec it goes off
Posted on Nov 18, 2009
Great Tip!, saved me a lot of time troubleshooting. I couldn't find the right part so I had to substitute a standard part. It would have cost me 95.00 just for the tech to walk in the door and it cost me 8.00 to fix it. While I had it open I realized the lens were filthy!, cleaned up and now the pic is like a new tv! Turned out to be the fuse in the center of the 3 next to the flyback. FL231
Posted on Mar 11, 2009
Convergence issues in this set are generally divide among three diffrent cuicit boards. THere are adjustment that can be made by service techs in service mode if that is problem. However if it is something electrrical it generaly take replacing on these boards. then a alignment process. All is dependant on which boards have to be replaced
Posted on Jan 10, 2008
Does anyone have a pert number or specks for dl231?
Posted on Jul 20, 2008
Go to menu then setup look for convergence if it is missing on menu then you have a open FUSE/ FL231, But if you have convergence on menu then go into service mode turnTV off then PRESS and hold at same time ch- and vol- wait for set to come on then release TV should now be in Factory settings.
Posted on Feb 20, 2009
The model number of your TV probably falls under the ITC-222 chassis design. Do a search based on that criteria and it should point you in the right direction. If I remember right, you need to replace FL231 on the deflector board though. Good luck
Posted on Jun 03, 2009
Tips for a great answer:
Aug 01, 2011 | RCA D52W20 52" Rear Projection HDTV-Ready...
Oct 02, 2009 | Projection Televisions
Jun 03, 2009 | RCA D52W20 52" Rear Projection HDTV-Ready...
Mar 09, 2009 | RCA R52WH73 Projection Television
Feb 20, 2009 | RCA D52W23 52" HDTV CRT TV
Jan 17, 2009 | RCA HD52W59 HDTV Projection Television
Jan 14, 2009 | Projection Televisions
Sep 04, 2008 | Projection Televisions
Nov 29, 2007 | Projection Televisions
3,054 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: