I was down loading some pictures to my computer and when I finished, my camera will no longer power up. I slide the power switch and the green "AF" light be side the view finder lights for a second and then goes out. That is all that happens. ???
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
How are you trying to download your pictures? The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries. Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program such as Picasa ( http://picasa.google.com ).
Make sure the camera is finished with all the pictures and it has full rewound into the canister. This camera counts down so if it's showing a number in the finder then there is pictures left to take. If you don't want these frame put the lens cap on shift to manual focus and manual mode turn the camera on and release the shutter until the pictures are all finished. it will then auto load the canister and you can release the back with the little leaver on the back left side of the camera. Here is a diagram and loading instructions.
1. Turn the camera off by sliding the ON/OFF switch (to the right of the LCD) down to the OFF position.
2. Reinsert the batteries, making sure their polarity alternates, with the battery closest to the hinge of the battery cover pointing down into the camera and the other one pointing up.
3. Turn the camera ON.
4. Press the button on the back of the camera to select the mode. If you do nothing, then the camera is in the Hi-resolution mode. The display will momentarily switch to 20 to indicate that 20 photos are available. When you take a photo, the number will decrease.
5. Press the button on the top of the camera body to take a photo. The camera will beep when you do.
6. IMPORTANT: do not switch off the camera until you download your photos to your computer.
7. Plug in the camera to your computer with its USB cable. This will power the camera when the computer is powered and save your batteries until you can download them to you computer.
7. Install your software and follow the directions (you need to unplug your camera before you start the installation). Once you load the CD, the installation wizard should begin. If it doesn't, then your computer is not recognizing the software.
Note: this software does not work on Apple OSX operating system (on my Mac), and I'm having trouble making it work on Windows XP (on my PC).
.in ur power shot search for a small compartment that holds a tiny rectangular shaped MEMORY CARD. .remove the card and stick it into a card reader(a narrow slot) that is connected to your computer. .next goto Start -> Accessories -> Scanner and Camera Wizard .Choose pictures and move all the pictures into one folder on your computer.