Question about Zenith IQB50M90W 50" Rear Projection Television

1 Answer

IQB60M90W blue convergence axis rotated.

Hi

The three colours converge whereby all three centers of the axis meet. The issue is that the blue colour is rotated by about 5 degrees causing an angled blue shadow. Is this repairable and how do I do it, which part do I buy?

Posted by on

  • Raven1212 Feb 22, 2008

    The alignment of the three colors is off and the crosshairs on the projection menu don't align properly. Went into projo menu and had no real luck. It's irritating because after unplugging and realigning, it works for awhile. Is this possible to fix/render?

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 4,402 Answers

Http://home.earthlink.net/~oleg.filippov/ConvergenceFix.htm
http://cmpalmer.blogspot.com/2006/11/fixing-my-own-tv-part-ii.html

Posted on Jan 15, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Im seeing three separate colour outlines on people and objects red,green, blue


You have a convergent problem, where the red, blue, green projector lamps are out of synch. See: http://www.youtube.com/watch?v=esk4nYZKFcg for a pictorial on how to fix convergent.

Dec 29, 2010 | Hitachi 50DX20B 50" Rear Projection...

1 Answer

Problems aligning convergence hc-p4753 projection


Hi,if the converence is wildly pinched in say one corner compared to the other colours then it is most likely that your convergence circuits have failed for that colour. - Warning,Not an easy fix without circuit schematics and can also be costly for the IC's too

Mar 19, 2010 | Samsung Televison & Video

1 Answer

I have a Panasonic HDTV and suddenly the colours went double!


hi, if you know little fixing tip's? here's my tip's sound's like converging ic's,gone bad. on the left board there's two a touched to a big heat sink.but before you start'.there's three wire connected to the board written. red .blue.and green.check for burn film resistor's on line red. replaced it with the same.good luck.

Feb 02, 2010 | Panasonic Televison & Video

3 Answers

My LG rear projection TV RE40NZ60RB colour is ghosting with three colours separating. Colour converging does not rectify


There is a problem with the convergence circuit. It can be as simple as poor solder connections at the pins of the convergence IC or a defective IC. If you can solder, you can fix this yourself. Please confirm the model number of hte set and I'll provide the part numbers etc. required to resolve this.

Thanks,
Dan

Aug 20, 2009 | Televison & Video

1 Answer

Convergence perfect focus not working and double vision


The problem you have is the 2 STK - 392 convergence integrated circuits need replacing the cost in the UK is about £150.
SUPER8

Nov 26, 2008 | Televison & Video

1 Answer

Pioneer SD-641HD5 red convergence - not chip problem!


Replace Both of your STKs if they are STK392-110s do not go back with them use STK392-180s better ICs, The 110s fall apart and do not hold up.

Nov 12, 2008 | Pioneer SD-533HD5 53" Rear Projection HDTV

3 Answers

Colour problem with rearview projection tvred


you will need to change out the convergence board if the blue and green wont align its time for a new board

Aug 21, 2008 | Sony KP-51HW40 51" Rear Projection...

1 Answer

Blue colour not centered. Does not respond to convergence. Rest of colour is ok, sound ok. Blue shadow to the right of image.


This could be a defective convergence IC. What is the make and model of the set? If you can post that info, I'll be able to get you more details.
Dan

Apr 08, 2008 | Televison & Video

1 Answer

Three colours don't converge


Shrink, the convergence circuit needs to be repaired, Until someone gets in there and takes a few measurements it`s hard to say what the cost will be, may just need to be re-soldered, good luck, BMW Rider

Dec 18, 2007 | RCA P46810LV 46" Rear Projection...

Not finding what you are looking for?
Zenith IQB50M90W 50" Rear Projection Television Logo

Related Topics:

216 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zenith Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75571 Answers

matt martin
matt martin

Level 3 Expert

1229 Answers

Jaime Hernandez

Level 3 Expert

2336 Answers

Are you a Zenith Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...