Question about Computer Monitors

2 Answers

Dell monitor for dimension 2350

Lately my monitor keeps blanking out... I was told that a patch could fix the problem.. I hooked another monitor to the computer and it works fine..

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers
Re: dell monitor for dimension 2350

Check for that specific monitor or check or

Posted on Jul 17, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert whose answer got voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 95 Answers
Re: dell monitor for dimension 2350

There are several updates for your computer. Here is a link for the model you gave me. I would update the chipset drivers and the video card drives. The BIOS might need to be updated to. When you go to dell's website you can go under support and do a search by model or service tag.I did the searh by model, Its always best to go by the service tag because this gives you the list of drivers for your exact computer. Here is the link.

If you need more help fell free to ask any questions you may have.

Posted on Jan 10, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Why is my Dell Monitor Blank

If you have another computer, try and see if you can hook it up to that and test it. If it still doesn't work it may be dead.

Sep 02, 2014 | Dell E171FP 17" Flat Panel LCD Monitor

2 Answers

Flat screen monitor almost works

check for the specifications of your PC's video card with the screen.
problem maybe at something else rather than the monitor.
try booting it on SAFE MODE.

Feb 28, 2008 | Mag Innovision InnoVision LT765 17" Flat...

1 Answer

Dell SE198WFP 19" LCD won't come out of standby

I went into the BIOS (with F2 during restart) and changed a value -- IIRC it was called something like "power management scheme" -- from the default S3 to the other choice, S1. Now the old Dell XP Dimension 2350 will go into and out of Standby correctly and the new SE198WFP 19" LCD will too.

Oct 05, 2009 | Dell SE198WFP LCD Monitor

2 Answers

Monitor issue

Just sounds like the monitor cable is loose or bad or the input mode on the monitor is set wrong - set it to auto or step through the modes.

Aug 10, 2009 | Envision H191W Monitor

1 Answer

Resolution wont resize properly

Try resetting your monitor to the factory settings. If that doesnt work I suggest you unistall your monitor in device manager Only if you have the monitor cd. If you do not have a cd to your monitor you can always download on the internet. These two options should help you but if they dont go ahead and come back and repost your question.

Jul 13, 2009 | Dell UltraSharp 1907FP 19" LCD Monitor

1 Answer

Montor shows a blank white screen and is unresponsive

Please try to connect the monitor to another PC, if it continues to happen, then probably an internal electronic part/s of your monitor is cold soldered / defective which failed to send signal to other hardware parts of your monitor thus you only see white display. I suggest to bring the unit to an authorized service center fix / replace the cold soldered / defective part/s. regards

May 28, 2009 | Dell Computer Monitors

1 Answer

Stuck in default monitor setting

Please reinstall the videocard+ the drivers..

Mar 29, 2009 | Dell Computer Monitors

1 Answer

Blank screen

Disconnect the monitor , from the computer, switch the monitor on , if you have some kind of Dell self test box running on the screen. The monitor is OK . The problem can be with the video card or resolution settings.

Also, try connectin the old monitor you had hooked up with the system to check ,if you see anything


Mar 14, 2009 | Dell UltraSharp E153FPb 15" LCD Flat Panel...

1 Answer

Dell monitor black screen

If you have another monitor for desktop hook other monitor up then under hardware and software in control panel, add the dell monitor, then hook it up. Some operating systems need the driver to be added first. My brother almost threw away agood dell lcd monitor before I told him this, now he loves the lcd, works great.

Mar 09, 2009 | Dell UltraSharp 1702FP 17" Flat Panel LCD...

Not finding what you are looking for?
Computer Monitors Logo

Related Topics:

1,356 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computer Monitors Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers


Level 3 Expert

18258 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Computer Monitor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides