Question about Linksys WRH54G Wireless Router
Load your internet browser page and type in 192.168.1.1 or 192.168.1.100 one or the either. The easiestway is to go by your gateway address. Type that in and your router page will load. You will need a username and password. The default is admin on both, but if you had setup it before it will be your own. Then go to the wireless tab and follow the steps.
Posted on Nov 19, 2009
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
If your using DSL connection, you can try this link.
Posted on Jul 17, 2009
In order to resolve the issue, please follow the steps:
If you have a cable internet connection:
1.Connect the wire (which is coming out from the modem, i.e, the internet wire)
into the WAN/Internet port of the router.
2.Connect your computer to any of the four LAN ports with a Ethernet cable(usually Blue/Yellow/Grey color wire)
3.Turn on the router
4.At the back of the Router there is a Red/Black button (Reset Button)
5.Push and Hold that button for 30 seconds.
6.Release the button and turn off the router for 30 seonds and turn it on again.
7.Type 192.168.1.1 in the address bar of the Internet Explorer and hit Enter
8.Enter the username and password (default password is admin and leave the username blank)
9.on the Setup page, make sure the Internet Connection Type is set to "Automatic Configuration-DHCP" and click Save settings.
10.Now click Wireless tab and fill the sections as mentioned:
Wireless Network Mode:Mixed
Wireless Network Name:As per your choice
Wireless RF Control-Standard
Wireless RF-Disable and click Save Settings
11.Now Click Wireless Security and fill the sections as mentioned(if you want to make your network password protected)
WEP Encrypion-64 bits 10hex digits
Key1-Enter 10 digit password(e.g-your 10 digit telephone number) and click Save Settings
If you have DSL internet connection, then all you need is to change the Step-9 and all the settings will remain same.
Step-9 (for DSL internet connection)
Internet Connection type should be selected to PPPoE and enter the Username and Password provided by your Internet Service provider. Then click Save Settings.
After completing all the above steps, turn off the Router for 30 seconds and turn it on after that. You can connect your wireless devices.
I hope this will resolve the issue.
Posted on Jun 06, 2010
First you log into the router setup, then you can change the user and password.
Download the User Manual here to walk through it..
Posted on May 25, 2011
Tips for a great answer:
Sep 18, 2013 | Linksys WRH54G Wireless Router
Jul 22, 2012 | Linksys WRH54G Wireless Router
Sep 02, 2011 | Linksys WRH54G Wireless Router
May 25, 2011 | Linksys WRH54G Wireless Router
Jan 30, 2011 | Linksys WRH54G Wireless Router
Dec 16, 2010 | Linksys WRH54G Wireless Router
Oct 27, 2010 | Linksys WRH54G Wireless Router
May 31, 2010 | Linksys WRH54G Wireless Router
Feb 27, 2009 | Linksys WRH54G Wireless Router
May 14, 2010 | Linksys WRH54G Wireless Router
1,952 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: