Question about Computers & Internet

1 Answer

My new LevelOne WBR 3600B router does not eyncronize

The router does not synchronize (the DSL lamp keeps blinking). The line is fine (an older WBR 3407B works fine), the devise, according to the retailer, has no problem, but I cannot connect.

The router is connected to the computer via cable.

Any ideas?

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert whose answer got voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 87 Answers

Hi, If you are using dsl line, then try to add SPLITTER or FILTER between wall jack and phone.
When you connect splitter you will have one input line and two output line, one is called voice which you connect to phone and the other is data which you connect to router.
you can use LAN cable to connect modem and computer. before you set the connection please remove all the connection from wall jack to computer, wait for 2 mins and then re connect, like this it will remove if any static charges stored. If you are able to see the DSL light is up and no more blinking, Then your problem is solved. Hope this information will help you

Posted on Nov 18, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

LevelOne WBR-6005 Router WIFI Problem

Try a different wireless device, e.g., iPod Touch, or iPhone, or Android mobile-phone, to see if any of them can connect to your wireless network.

Aug 27, 2014 | Levelone Computers & Internet

1 Answer

How do I find the factory default pasword for a WbR 3408 Levelone router

please try this :

WBR-3408 Default IP:

WBR-3408 Default Password: password

WBR-3408 Default Username: admin


Jan 12, 2013 | Computers & Internet

2 Answers

I have a D-link DSL-2750U router worked fine till yesterday, but now its power led keeps on giving a red light it should give green a second or two later but it keeps givings

Reset router. There are two resets. A simple push reboots and holding it in clears all custom settings. Try the first.

This is a quick fix and usually does it. Test with network cable and work your way backwards to modem if you still have problems.

Nov 11, 2012 | Computers & Internet

1 Answer

I need to know the modem login and password for level1 modems

Levelone - FBR-1161A (Levelone Firmware) admin admin Levelone - FBR-1418TX (Levelone Firmware)
admin Levelone - WBR-3405TX (Levelone Firmware) admin admin Levelone - WBR-3406TX (Levelone Firmware) admin admin Levelone - WBR-3408 (Levelone Firmware) admin
Levelone - WBR-3800 (Levelone Firmware)
password Levelone - WBR-6000 (Levelone Firmware) admin password Levelone - WBR-6001 (Levelone Firmware)

Dec 10, 2010 | Levelone ADSL2+ Modem Router FBR1161A

2 Answers

Internet is slow when using the router.

check your hard drive capacity and check if you need to do a defragmentation.
You didn't specify if you are connecting via wireless or hard connection i.e. Ethernet cord.
If you have DSL you may want the ISP to do a line check at the drop to your house. This may cause slow connectivity if the line has been chewed by a squirrel or water leakage into the insulation. It is very rare but if this check out then it is the router itself or the cable.
This also sounds like the router is not allocating the proper switching for each computer and the bandwidth is given to the highest priority task computer.

Apr 25, 2010 | Levelone Wireless N_Max BoardbandRouter

1 Answer

I need to chance my netword name so how can i chance ?

you will need to open the set up interface of the router, there you can change the wireless settings of the router.
Click Here for more info about the router set up

Oct 12, 2009 | Levelone CP TECHNOLOGIES LEVELONE...

1 Answer


Sounds like you need to 'copy' the mac address of the computer it was orginally hooked to before and put it into the router. Some routers have an option to do this in the settings menu of the router with one click.

May 15, 2008 | D-Link RangeBooster G WBR-2310 Wireless...

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

229 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18424 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

David Payne
David Payne

Level 3 Expert

14162 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides