Question about Canon Office Equipment & Supplies

1 Answer

CANON PIXMA IP1900 WONT TURN ON. Its brand new. Only worked for a couple days. Sometimes it powers on for a few second, only to turn back off, after which it wont power back on.

Posted by on

  • Raphael Josiah Nov 17, 2009

    OK. Here's the thing. I do not live in the USA. Thus, not covered under the warranty and too expensive to send back. I have printer repair knoledge but this beats me. Help. I am desperate.


×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,472 Answers

Ok because this is brand new you have two options. 1 return it to where you bought it as most places this would definitely be covered under there return policy. or 2.) have it repaired/replaced under warranty by canon. to do this visit this link:
http://www.canon-europe.com/Support/Consumer_Products/services_locator/index.aspx
Thank you,
Lee

Posted on Nov 17, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Resetter of canon iP1900


Step 1 : Reset Hardware
  1. Turn off Canon Pixma iP1900, iP1300 Printers
  2. Hold down Resume button and press Power button.
  3. Keep holding down Power button and let Resume button go.
  4. Press Resume button 2 times then let BOTH buttons go.
  5. Green lights will flash and then stop blinking.
  6. When green lights are solid, press the Resume button 4 times.
  7. Press the Power button and the Canon Pixma iP1900, iP1300 Printers should turn off, if not, press the Power button once more.
  8. Your Canon Pixma iP1900, iP1300 Printers should respond as normal

Jul 06, 2011 | Canon Office Equipment & Supplies

1 Answer

How do i remove an ink cartridge from my pixma ip1900


Open the printer cover while powered on. After a few seconds the cartridges will be positioned on the left side where they can be easily reached. Lightly press down on the cartridge where you see a half moon shaped ridge. Take out the cartridge Insert new cartridge press cartridge upwards until it snaps into place. You're good to go!

Jan 15, 2011 | Canon PIXMA iP1800 InkJet Photo Printer

1 Answer

The CD ROM for my Canon Pixma ip1900 is missing


Alternatively, you can download the Drivers & Software for Canon Pixma IP1900
Visit above Canon Official link to get the required drivers and utilities.

CreativeTECH

Jan 08, 2011 | Office Equipment & Supplies

1 Answer

Canon pixma printer 1900 ink absorber almost full





These are the steps:
1. Turn On iP1900
2. Push and Hold Resume button about 2 minutes
3. Release Resume button
4. Printer back to normal again

To get Permanent , follow the steps here :
Manual Resetter canon Pixma iP1980/1900

http://www.filestube.com/41b4dc677feec57103e9,g/iPTool.html


Click on this link or copy and paste the complete link into your browser.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response. Happy New Year!

Thanks, Joe







Jan 01, 2011 | Canon PIXMA iP1600 Printer

1 Answer

Canon ip1980 model printer's (ink absorber almost full problem)


release cable power and usb press and hold power button than plug cable power to printer port, pres and hold resume button 18 second or more, than plug usb cable into printer, press power button (printer off), and press again power button (prnter On), thats alll.... thas working to my printer (ip1800, ip1850, and ip1900, ip1980)

Nov 30, 2010 | Canon PIXMA iP1800 InkJet Photo Printer

2 Answers

My printer power wont turn on when i press button


Try removing your printer cartridges and then the print head from the printer. If the printer powers up with the print head removed, then the print head is either shorted or clogged. If it's shorted out then you will need a new print head (usually cheaper to just buy a new printer). If you can clean the print head without damaging it, sometimes it will work again. Usaully a good 24 hour soak in alcohol or a cleaning solution will work.

May 09, 2010 | Canon PIXMA iP3000 InkJet Photo Printer

2 Answers

Canon Pixma ip1900 Printer wont print


i think you need a canon resetter just download it and it will fix your problem. gud luck ellyhill

Oct 24, 2009 | Canon Office Equipment & Supplies

1 Answer

Power failure, canon MP620 wont turn back on


Could be power supply, or logic PCB, but most times it's the printhead, at any rate, Canon has a one year warranty to fix any problem.

Aug 10, 2009 | Canon PIXMA MP600 all-In-One InkJet...

1 Answer

Kenwood steroe wont turn back on after few days of working


check the fuse on the back of the radio, as well as the circuit fuse sending power to the radio

Jan 14, 2009 | Kenwood Excelon KAC-X541 88W x 4 Car...

2 Answers

Canon Pixma IP600D - error code 6502


Sometimes the Canon printers which use PG-5BK/CL-8 colour cartridges with chips will give error massages like 6502 or other types of error message to do with the cartridges, which has the orange light flashing and the printer will not work. Follow this procedure which quite often resets the printer and allows it to resume printing.

When error is indicated, turn power switch off so green light is extinguished.

First hold down resume button and then hold down power button so both are held down at same time

When green light comes on, continue holding down power button and let resume button go, then press resume button twice. Then let power button go.

Then press resume button four times, power button should be released before doing this.

Wait until printer settles down, if power is off, turn on. If power will not come on, remove power cord from back of printer, then wait 15 seconds before plugging back in again and turn power on. This normally solves the error problem - if not go through same procedure again.

Incidentally, you may find that if the chips had previously been disabled, the low ink warnings are showing again and they will have to be disabled once more. This would indicate that the above procedure clears the firmware memory of the disabling of the chips, this may be useful if you need some warranty work done on your
printer after the chips had been disabled.

Oct 03, 2008 | Office Equipment & Supplies

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1921 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...