Question about Creative Labs Audio Players & Recorders
I was moving the tower and the speakers came unplugged and now I cant figure out to get them working again, I already restarted the computer but Im retarded! so there are two speakers and a sub-woofer box that connects the speakers to power and to the tower and on the tower there are 6 different colored jacks on the back panel,pink green gray blue black and orange. the computer system is gateway and the speakers are creative? so yeah if some one could give me step by step directions on how to fix my fiances computer before I have to go get him from work in 3 hours I would really appreciate it!
Try the BLUE jack, then the GREEN jack. You won't hurt anything if you guess wrong. BTW, are the sub and speakers powered up? Pilot light showing they're on? Some speakers are powered by a USB port - any loose USB cables laying around?
Posted on Apr 19, 2017
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Sub Woofer does not work
hi there are fast checkings for you: Quick Connect Card http://www.alteclansing.com/downloads/641QCC.pdf manual: http://www.alteclansing.com/downloads/641_MAN.pdf is the system working fine exept the sub? my guess: the headphone jack works fine then the speakears are too if soo then the sub amp is bad or some connection is torn try opening the sub and see if everything is hooked right and if soo then the amp is the problem every electronics shop can fix this good luck
Posted on Mar 21, 2006
Is this connecting to a sound blaster audigy 2 zs or xfi soundcard? or a motherboard onboard soundcard/ aftermarket Other than creative?
If connected to the creative card odds are the wire is bad. get a new one
If connected to a generic the wires for the speakers are proprietary and you have to go get 3.5 to 3.5 stereo cables to hook it up
Posted on Sep 13, 2009
Tips for a great answer:
Apr 26, 2011 | Computers & Internet
Jan 05, 2011 | Monster Cable Products PG SSGS-500...
Sep 04, 2010 | Logitech X-530 Computer Speakers
The buttons on the front of the set fail, (like mine did) even if they never get used. Probably the 'DOWN Volume' in your case is stuck closed. Try pecking on it first. My remote stopped working but so did the manual buttons too. While poking around on stuff I swished my finger across the buttons and it all started working so I knew I was on to something. I never figured out which one was the culprit as it continued to cause problems and was replaced as a complete unit under warranty.
The other quick check/fix is to remove the trim plate around the button plate (pop out stays like the speaker covers) , then remove the button assembly (3 screws plus pop out stays like the speaker covers) then unplug the multi colored lead from the button circuit board. This puts the Remote back in control and it will work just fine like this, minus manual control of course.
Jul 19, 2010 | Mitsubishi WS-65711 65" Rear Projection...
Jun 26, 2010 | HP Computers & Internet
Mar 24, 2009 | Audio Players & Recorders
Jan 24, 2009 | Sears GC-1020 MP3 Player
May 25, 2016 | Creative Labs Zen V MP3 Player
186 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: