Question about GE (PSS26MSRSS) Side by Side Refrigerator

3 Answers

Reset the water filter indicater light

I recently replaced my water filter in my side by side
Have tried to reset the replace water filter indicater light but no matter what i do the light remains red . Any Ideas

Posted by on

  • 2 more comments 
  • Anonymous Feb 16, 2008


  • salvatoreb Mar 21, 2008

    replaced filter as directed - pressed rest buttom held 3 seconds, blinks 3 times but light continues to remain on ? How do I shut off light ?

  • Anonymous Mar 15, 2014

    water filter light came on and we didn't replace the filter right away and reset the light. Have replaced the filter and the water flow is week and sometimes intermittent

  • Anonymous Mar 28, 2014

    replaced filter but warning light is still on



3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hold light and lock buttons until lamp blinking release and lamp turns off no it is reset.

Posted on Mar 03, 2008


Tried unplugging it allready that didnt work

Posted on Jan 27, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 770 Answers

Unplug the unit for 3 min then back in see if it clears

Posted on Jan 26, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I am replacing the water filter how do I reset on the outside door

The Water Filter Status Indicator Light serves as a
reminder to replace the water filter. A green light
indicates that the filter is in good condition. A red light
indicates the filter should be changed. Once light turns
red, it will remain red until function is reset.
To Reset Indicator:
• Press and hold both the Lock and Water
buttons simultaneously for four seconds. The
green filter status indicator light will flash
three times when the function has
successfully reset.
Thanks, Sea Breeze

May 17, 2010 | Jenn-Air JCD2295HES Side by Side...

1 Answer

Water filter warning light has come on

Hello. When the water filter warning light comes on it is time to replace the water filter. Once the filter is replaced you will have to reset the warning light. To do that Hold the Lock/Unlock Button and the Water Dispensing Button for (3) Seconds. The Change Filter Light will Blink and Reset. Joe

please rate my answer as very helpful. Thanks.

Apr 21, 2010 | Maytag MSD2756GES Side by Side...

1 Answer

Change water filter indicater light

press and hold the filter button for 5 second the light will go green

Apr 11, 2010 | Maytag 25.6 cu. ft. Wide-By-Side...

1 Answer

No Water to Ice Dispenser

Pour about 1/2 cup of water into ice maker . If it dumps , replace the water valve . If doesn't dump , replace the ice maker. Also make sure the coils are clean of dust , lint , etc...

Aug 15, 2009 | GE (PSS26MSRSS) Side by Side Refrigerator

1 Answer

How do I reset change waterfilter indicater light?

Once you've changed the filter in the back of the frig section press and hold the light and lock buttons for a few seconds and the water filter indicator will reset.

Aug 05, 2009 | Maytag MSD2454G Side by Side Refrigerator

1 Answer

How do you reset the change filter light , have replaced filter

I have replaced filter but how do you reset change filter light?
Have replaced the filter. The light is still red. Answer: After changing the water filter, press Cubed and Crushed buttons simultaneously and hold 3 seconds.

Jan 28, 2009 | Samsung RM255LASH Side by Side...

1 Answer

Fridge Filter

the filter islocated behind the toe grille, ordering instructions areprinted on the filter itself, and resetting the light is a matter of holdingin the button for 3-5 secs, its filtering your water and ice

Jan 26, 2009 | KitchenAid Superba Architect KSCS25INSS...

2 Answers

Red light

Try firsd doing a complete defrost, leave fridge unplugged at least 24 hours

May 28, 2008 | Samsung RS2630SH Side by Side Refrigerator

Not finding what you are looking for?
GE (PSS26MSRSS) Side by Side Refrigerator Logo

717 people viewed this question

Ask a Question

Usually answered in minutes!

Top Refrigerators Experts

Sal De

Level 3 Expert

2694 Answers

Charles T Nevin
Charles T Nevin

Level 3 Expert

4070 Answers


Level 2 Expert

98 Answers

Are you a Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides