Question about HP LaserJet 1320 Printer

1 Answer

HP1320 is printing so light that it almost appears as shdows. New print cartridges have been installed & problem persists.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • HP Master
  • 1,447 Answers

Problem laser unite clean mirror then solve this problem

Posted on Nov 22, 2009

  • Sazeed Computer
    Sazeed Computer Dec 01, 2009

    Print quality defend on printer cartridge.If you buy a new cartridge,may be it is not original HP cartridge.Please change your cartridge,and again install your old cartridge.Take a decision.What is wrong?

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hp c6180 states cartridges missing or damaged


OK now this might seem bizarre, but did you go ahead and click the "Black Only" print option?

I have a C6180. Just installed all new cartridges. Tried to print and got the message that Cyan is empty. Tried all sorts of things. Then out of frustration clicked the Black Onl option. Document came out printed in color! Double checked with a picture that has lots of cyan colors. It all printed too! Go figure.

Apr 25, 2012 | HP Photosmart C6180 All-In-One InkJet...

1 Answer

My hp officejet ignore printing after replacing of cayne colour cartridge.


I hope Magenta cartridge is not refilled one right? :#Remove all cartridges and print heads, disconnect power & USB cable, switch off wait for couple of minutes.. give power switch on the machine wait do as per the message appears on display.. once installed cartridges and printer heads wait for the ready mode:.. once ready mode appears attach USB cable then print and see..# check with old and new cartridge see the difference of message.. if both messages are same it might be problem with ISS(Ink supply station) faulty, try it get back to us..for further remedies.

Feb 03, 2012 | HP Officejet Pro 8500 Wireless All-In-One...

1 Answer

No computer of mine recognizes this printer and the left drip light keeps blinking even though i have repalced it


If by referring to the left drip light you mean the bottom left light; this is the indicator light for the color ink cartridge:
Left print cartridge light blinks, Power light on. Tri-color print cartridge is damaged or missing.
? Reinstall the print cartridge. If the error persists, replace the print cartridge.

? You can still print with one cartridge


it is possible that once the computer and printer are communicating that the error messages could also be resolved by running the printer diagnostic program.


If your computers do not recognize the printer, uninstall the driver, if you had installed a specific driver, and then go to the site below to download a driver for your operating system and specific printer:
http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=439154&lang=en&cc=us&taskId=135&prodTypeId=18972&prodSeriesId=439153 After installing the operating system specific driver the computer should recognize the printer. Trust this is helpful. :)

Dec 08, 2010 | HP DeskJet 9800 InkJet Printer

2 Answers

I changed the printer cartridges in a hp officejet 4315 and now it won't print-flashing error meesage "Cartridge Error:refer to device documentation to trouble shoot" What do I do? i


Good Day Sir, hope this will help you.
print cartridge troubleshooting for hp officejet 4315 :

1. Remove the black print cartridge from the slot on the right. Do not touch the ink nozzles or the copper-colored contacts. check for possible damage to the copper-colored contacts or ink nozzles.
2. Reinsert the print cartridge by sliding it forward into the slot. Then push the print cartridge forward until it clicks into the socket.
3. Repeat steps 1 and 2 for the tri-color print cartridge on the left side.
4. If the problem persists, print a self-test report to determine if there is a problem with the print cartridges.
5. If the self test report shows a problem, clean the print cartridges.
6. If the problem persists, clean the copper-colored contacts of the print cartridges.
7. If you are still experiencing problems with printing, determine which print cartridge is experiencing the problem and replace it.

have a nice day.

7.

Jun 22, 2010 | HP Officejet 4315 All-in-One Printer

1 Answer

Installed new cartridge but print still very light when printing from computer, print quality better when copying.


Please perform the following steps:

1. ‘Turn on the power’ to the unit and raise the ‘cartridge access cover’. The cartridges will move towards the ‘center’.

2. After the carriage (the cartridge holder) stops, unplug the ‘power cord’ from the back of the unit. This will keep the cartridges from moving back to the ‘capping station’.

3. Remove the cartridge(s) from the carriage.

4. Using a soft, clean, lint-free cloth or a cotton swab lightly moistened with distilled, filtered, or bottled water and gently clean the ‘face’, ‘edges’ and the ‘electrical contacts’. (Change to a clean cotton swab as needed).

CAUTION: Be careful not to touch the ink nozzles on the bottom of the print.

5. Inside the All-in-One, clean the contacts in the print carriage with a slightly dampened soft, clean, lint-free cloth. Allow the electrical contacts to dry completely.

The information provided above is also available in a graphical format at:

http://h10025.www1.hp.com/ewfrf/wc/genericDocument?&cc=us&docname=bpu01831

Note: Please do not insert the cartridge before performing the steps given below.

Check if the issue is resolved. If the issue persists, please perform a power-cycle on the unit.

1. Unplug the power supply from the wall outlet.

2. Unplug the power supply from the back of the printer.

3. Wait at least 20 seconds, then plug in the supply back into the wall outlet.

4. Plug in the power supply back into the printer.

5. Press the power button to turn the printer on.

Verify the results. If the issue persists please get back to me with the following information:

* Does the unit print the self test page properly?

1. Load the paper tray with unused plain white paper.

2. Press Setup until Print Report appears on the display, then press OK.

3. Press OK again. The self-test report prints.

:) Dr Tony

Apr 15, 2010 | HP PSC 1610v All-in-One Printer

1 Answer

Colors are blurred and printing offline. colors arent showing up. all toners are new. reset the default setting, and aligned but still doing same thing


hello , I may try doing a printer reconfiguration page or page alignment again.

working properly. Press ✔. Press 􀀙 until INFORMATION is highlighted.
Press ✔. Press 􀀙 until PRINT CONFIGURATION is highlighted. Press ✔ to
print the page. If the configuration page does not print, consult the CD User Guide for more info on task.

hope this solves it. if not,

you may try this :

Incorrect shade

The sealing tape has not been removed from
the print cartridge.

Remove the sealing tape from the print
cartridge for the color that is missing. See
Changing print cartridges.

Inconsistent colors after installing a print cartridge

The sealing tape has not been removed from
the print cartridge.
Remove the sealing tape from the print
cartridge for the color that is missing. See
Changing print cartridges.

Another print cartridge may be low. Check the supplies gauge on the control panel
or print a supplies status page. See Printer
information pages.

Print cartridges may be improperly installed. Verify that each print cartridge is installed properly

please give use more info to the problem if it still persists and we can try and pinpoint further

Mar 27, 2010 | HP LaserJet 4600dn Color Printer

1 Answer

New yellow toner not fitting properly


try to install the cartridge again and see if it can print.or u can reinstall the printer drivers. if the problem still persists then visit below mentioned link for a free diagnosis.
http://tinyurl.com/m7ghqz

Jun 18, 2009 | Samsung CLP 300 Laser Printer

2 Answers

Hp 3015 prints light with new oem cartridge


Machine may be in econo mode. To enable/disable.
Hope this helps
  1. open the Printer Properties (or Printing Preferences in Windows 2000 and Windows XP).
  2. On the Paper/Quality tab or the Finishing tab deselect EconoMode check box.

Apr 01, 2009 | HP LaserJet 3015 All-In-One Printer

2 Answers

Memory error


Just do 2 steps:

1. Press Stop.
2. If the display highlight "Resume". Press the OK (Check Button).

The display will tell you that a Non-HP Cartridge is installed and Economode is Disabled.
At least, you can now print. The display will show back again to "Ready".

Jul 23, 2008 | HP LaserJet 2420 Printer

3 Answers

Print Cartrige Error


they probably are dried up if they were in storage

Mar 16, 2007 | HP PSC 1510 All-In-One InkJet Printer

Not finding what you are looking for?
HP LaserJet 1320 Printer Logo

179 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...