Question about Jenn-Air WW27430P Stainless Steel Electric Double Oven

1 Answer

-F-C- on display and will stop temporarily when you hit cancel, but back on in seconds

Posted by on

  • loridavidsun Nov 18, 2009

    Thank you tripping the circuit breaker fixed the problem

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jenn-Air Master
  • 19,396 Answers

Hi.

FC error is Control Board communication error.

Try to reset the error disconnecting power for two minutes.
Trip the circuit breaker or disconnect power cord.

If that does not clear the error, the appliance must be taken apart to test ribbon cable to display panel and buttons.


Here all parts and diagrams.

If you need to call a technician, or if you want to get a quote on repair you can use the number listed on the owners manual.

Regards.

Posted on Nov 17, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is error code F1


Here's a list of error codes for Whirlpool oven/range. Whirlpool Range Fault Codes

Sep 21, 2014 | Whirlpool Ovens

1 Answer

Oven start button not working


Thank you for the full model number I was able to pull up the electrical schematic first turn the circuit breaker off for 30 seconds then back on if you get a PF just hit the cancel button it's the same as rebooting your computer, do you still have a display is the time showing if not you have either an open thermal fuse stopping power to the control or a bad control, if you have a display push and hold the cancel/off for 5 seconds this should place you in diagnostics error codes always start with an F number E number example F0E0 no errors I wish I could be of more help but I have service many oven with the exact problem you are having and it's 50/50 as to a bad control or keypad each are dependent on each other on the back of the control panel there should be a plastic packet with the technical sheet hopes this helps

Feb 05, 2014 | Whirlpool Ovens

1 Answer

My oven door is locked closed. Also, it reads F8 and beeps. In order to stop the beeping, the cancel/off button must be hit. When I do that, the fan turns on for about a minute and then stops and goes back...


Hello,

The control board runs self checks about every 10 seconds to check the oven codition,and what the F8 error code means is it has detected a problem with the control board itself and it needs to be repalced

Gene

Aug 04, 2011 | Jenn-Air JJW8430D Electric Double Oven

1 Answer

I was able to clear the locked door message, and get over working following steps above, but cannot get the lock mechanism to release, and therefore cannot close the door


Check out these steps at the following link... http://www.geappliances.com/search/fast/infobase/10004586.htm

Range - "LOC DOOR" flashes in the display

If "LOC DOOR" is flashing in the display of your range or oven, and the self-clean cycle has not been selected, follow the steps below to reset your control:

Motorized Switch
    1. With the door open, locate the door jamb switch on the face of the oven. It will look like a small black post or dowel.
    2. Push it in until the oven cavity light goes off, indicating that the oven believes the door is closed.
    3. While you hold the door jamb switch in this position, complete the following steps.
    4. Press the Clean pad, wait 10 seconds.
    5. When the cycle initiates, press the clear/off or cancel pad immediately to cancel it.
    6. Wait 10 seconds for the display to clear.
    7. The door should unlock and there should not be a need for service.
Manual Switch
    1. Press the Clean pad.
    2. Close the door.
    3. Slide the latch to lock the door.
    4. Hit the cancel button immediately.
    5. Unlock the door.

Range - "LOC DOOR" flashes in the display

If "LOC DOOR" is flashing in the display of your range or oven, and the self-clean cycle has not been selected, follow the steps below to reset your control:

Motorized Switch
    1. With the door open, locate the door jamb switch on the face of the oven. It will look like a small black post or dowel.
    2. Push it in until the oven cavity light goes off, indicating that the oven believes the door is closed.
    3. While you hold the door jamb switch in this position, complete the following steps.
    4. Press the Clean pad, wait 10 seconds.
    5. When the cycle initiates, press the clear/off or cancel pad immediately to cancel it.
    6. Wait 10 seconds for the display to clear.
    7. The door should unlock and there should not be a need for service.
Manual Switch
    1. Press the Clean pad.
    2. Close the door.
    3. Slide the latch to lock the door.
    4. Hit the cancel button immediately.
    5. Unlock the door.

Nov 24, 2010 | GE Profile JTP18 Electric Single Oven

1 Answer

I pressed the self clean option and the oven locked but every two minutes an alarm sounds and the code F8 appears. The cancel option stops the alarm temporarily. How do I either clean the oven or cancel...


F8 code means your door latch assy needs to be replaced. Two options:
1. Turn it off on the circuit braker
2. Replace the door latch.
It will continue to try to lock itself most likely, as door latch microswitch logic is messed up.
www.oc-repair.com

Feb 10, 2010 | Dacor ECD230 Epicure Electric Double Oven

1 Answer

Maytag double oven is locked and won't open


Hi. Has a fault code been displayed and a continuous beeps? press and hold the cancel & cook & hold buttons together for about 3seconds then door should open.
Hope this helps.

David

Sep 13, 2017 | Maytag MEW6630D Stainless Steel Electric...

1 Answer

My whirlpool range model#rf114px513 started


You will need to press the stop /cancel button this will clear the display

Nov 15, 2009 | Ovens

3 Answers

F1 display and beeping


F1 Power to element relay energized during time of day display.
1. Wiring harness shorted.
2. Or change power relay board (PRB).

Note: for double ovens, change second oven board.

Jul 27, 2009 | Jenn-Air JJW8230D Electric Double Oven

2 Answers

Re: my whirlpool digital oven


The red key sign is a lock against children. To cancel it you have to hold the two buttons at the same time for 5 seconds (you activate it the same way).

The STOP sign appears after the cooker switches of after a power cut. You just have to press the left button, and, using the right knob, set the time.

Jun 24, 2008 | Ovens

1 Answer

My oven is beeping!


Try turning it off at the mains, then whilst turning it on, press and hold the cancel button.
Check the fuse and any other electrics on the same ring; eg. Washing Machine - this can indicate that the circuit breaker has tripped, replace any fuses and check integrity of electric on that circut, then flick it back on.

Jan 26, 2008 | Frigidaire GLEB27S7A Electric Single Oven

Not finding what you are looking for?
Jenn-Air WW27430P Stainless Steel Electric Double Oven Logo

Related Topics:

58 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jenn-Air Ovens Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Cindy Wells

Level 3 Expert

5186 Answers

Sal DeAngelo

Level 3 Expert

2330 Answers

Are you a Jenn-Air Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...