Question about Audio Players & Recorders

1 Answer

No disc error

Disc won't play...HELP

Posted by on

  • 6 more comments 
  • Anonymous Apr 03, 2008

    every time i put a cd in the jvc fs-sd9 it reads no disc

  • werwooolf Jun 28, 2008

    quit playing DVDs and CD's displaying "No Disc". After lens cleaning, worked for a couple of days, and now does not read any.

  • Anonymous Jul 13, 2008

    knows where the disc is but won't read/spin it. just reads NO DISC for all discs

  • Anonymous Jul 13, 2008

    knows where the disc is but won't read/spin it. just reads NO DISC for all discs

  • jdallaire21 Jul 19, 2008

    Yep, same here!

  • Anonymous Sep 07, 2008


    My Sharp XL HP505 read 'No Disk' and stays on

    #1 which flashes.

    Tried the solution of pressing certain buttons

    to put the machine into 'disk allignment' mode

    but it worked for a while then reverted to same


    Thought I might download the XL HP505 Service Manual

    (Not user or operation) which probably would show me

    a schematic of how to clean the laser head(s) and also

    might give all the codes that the techies see, no?

  • giallonardo Nov 10, 2008

    My Sony CMT-ED1 doesn't recognize any CDs. I get a "no disk" messgae after putting in new CDs. What can I do?

  • romeo_166 Jan 27, 2009

    I have the same problem here. Did anyone tried to clean the laser heads? Did it help?



1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Several posts at the Sanyo/Fisher site ( suggests that some models have a 'reset' button that will 'solve' the problem when depressed, the alternative is to unplug electical supply for 24 hours then try again. This has worked for me but the problem is persistent and I am looking for permanent fix...asking Sanyo/Fisher first.

Posted on Jan 21, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Won`t play dvd`s.try a cleaning disc no luck!possible dvd diode gone?any help please.Nigel...

Hi Nigel,
There are three reasons for discs not playing.
First, if the set has been lying for some time, the loading belt becomes lose and the loading is not complete. The result is no disc play.
Second, there is dust on the lense. Again the result is no disc play.
Third, the lense unit has gone bad or weak. Here also the result is no disc play.

Jan 24, 2016 | Televison & Video

1 Answer

My wii won't play any games, I just get an error message

Well it might be that the disc drive is bad then or the reading laser is weak too.

Sep 16, 2012 | Nintendo Wii Console

1 Answer

My dvd player won't play dvd

likely if cannot read disc, or no disc or error, that unit has either dirty or bad optical pickup.

May 14, 2012 | Televison & Video

1 Answer

Sony DCR-DVD403 C 13:02 Error Message so won't record movies.

Place an empty disc in, format the disc, record a little scene. Turn off camcorder. Place the error disc in the camcorder, turn on the camcorder all the way to play/edit. If this doesn't work turn it to record and try to record. Worked for some of my error disc

May 10, 2012 | Sony Handycam DCR-DVD403 DVD Camcorder

1 Answer

Dvd wont work

Insert a audio disc and a video disc into it, and see whether it plays well. If not and i it payse these discs, and won't play DVD discs only, the rome is efective, and should be replaces. Repair to ROM's are very difficut. It will be best to repace it with a new one.

Feb 05, 2012 | Dell Computers & Internet

1 Answer

No Disc error

Clean the lens assembley of the set by inserting a lens cleaning disc into it , and play it at least three times. If it does not help you, the laser pickup unit of the set is faulty and should be replaced with same type and number. The cleanind disc can be bought from electroncic spare part selling shops at your town, and won't cost more. OK.

Jan 19, 2012 | Sharper Image GM402 CD Shelf System

1 Answer

My front loader reads disc error or unplayable no matter what disc I insert. It worked just fine for about 2 years. It doesn ot get heavy cd use, but everyday radio/alarm use.

To resolve this issue, try one or all of the following:
  • The Wave® music system is designed to play commercial CDs, CD-Rs, MP3-encoded CDS and CD-RWs. If your system has trouble playing MP3 CDs, make sure the discs were recorded with compatible formats. See Cannot play MP3 CDs

  • The system may not be able to play certain CD-RW discs. Playability is dependant on how the disc was recorded, including the format it was recorded in and the actual disc used for recording.
    Note: iTunes defaults to AAC as the encoding format. In order to use iTunes to make CDs that will play on the Wave® music system, you’ll need to change the format to MP3 How to Choose Import Options

  • Different brands of CD-Rs and CD-RWs use different materials which may affect the ability of a player to read them. If you are burning your own CD-Rs or CD-RWs, experiment with different brands of discs

  • If a commercial disc won’t play, check for scratches, fingerprints or other physical damage. Try the CD in another player. If it still won’t play, there may be a problem with the disc

  • Reset the system by disconnecting the power cord from the wall for one minute, then plug the system back in

Dec 05, 2009 | Bose Wave Radio

3 Answers

Hi what does Error 03 mean?

My endeavor has done this error 3 a couple of times and the cd changer basically shuts off all lights and won't do anything. Someone on another solution page said to slide a credit card back and forth in the cd opening to fix the problem. I've done this both times and it has made the changer play again as if nothing had happened : )

Nov 14, 2009 | 2004 Mitsubishi Endeavor

2 Answers

Samsung dvd player wont read disk. says disc error

There a few causes of this.Check your manual to see what discs it won`t play.e.g finalised.,formatted
Moisture could have condensed inside the unit.Remove the disc and leave the unit turned onfor about 2 hours until the moisture evaporates.
Also check the region code and the appropriate dvd code to play on it.

Oct 20, 2009 | Televison & Video

1 Answer

RCA RS 1285 5 disk audio system won t show or play

When you turn on the unit the cd draw seams to open. I hear it making a noise like if it is trying to get ready to play. When you shut the draw it won't play, change tracts, or the disc thing to put in more disc wont work. Someone please help me

May 01, 2009 | RCA Audio Players & Recorders

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

390 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio Players & Recorders Experts


Level 3 Expert

5554 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

The Knight
The Knight

Level 3 Expert

75846 Answers

Are you an Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides