Question about Linksys Wireless-G WRT54G Router
How do i secure wireless connection? shows unsecured
1. Connect the computer to your Wireless router then using the internet explorer access the router gui 192.168.1.1 2. It is extremely important that you change the password for your router. Select a strong password using numbers and letters. This is the password that you will use to login and configure your router after this initial setup. 3. Select a unique name for your wireless network. The name of your network is known as the SSID. This is what wireless users will use to idneed to secure wireless connection - 94c0abe.jpgh router and network they connect to.
Posted on Nov 17, 2009
In order to secure your Router's signal, log in to the router and go to the Wireless section. Here you'll find your SSID (Network Name) and Security settings. In the Security area you can choose your security method, and set the Passcode for your router. Once this is set, any access to your router will need this passcode in order to gain access to the Internet.
Posted on Nov 17, 2009
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
How do you know that you are connecting and there is no security? There first thing to check is the router settings. You should type into the browser 192.168.1.1 (or whatever you have configured your router's IP address for). Enter the user name and password for the router. On the next screen you will notice a link for wireless settings. Click this and on the new page check the bottom section that says "Wireless Security Mode". It should be set to something other than "none". Post back and let me know what it is set to.
Posted on Nov 20, 2007
I found a link on how you can secure your wireless network. Click here. Let me know if you will still have a problem.
Posted on Oct 02, 2008
You have to go into the setup for the router. Most default to the 192.168.1.1 IP address. You would type that address into your internet browser and hit enter. Then you will be asked for a name and password. If you have your belkin manual it will tell you the default name and password. Once in the settings you can change the password. You can also turn off SSID broadcasting, enable the highest level of security that your particular router supports in conjunction with your computer and enable MAC authentication. If you enable MAC authentication you have to type in the MAC address for each device you wish to have access to the router.
Posted on Nov 07, 2009
Tips for a great answer:
Nov 15, 2016 | Computers & Internet
Aug 26, 2011 | Arris 2247N8 Wireless DSL Modem Router
Jan 10, 2011 | Fujitsu Siemens AMILO Pro V2010 Notebook
Apr 13, 2010 | Toshiba Satellite A60 Notebook
Apr 03, 2009 | Computers & Internet
Jan 23, 2009 | Linksys Cable/DSL 802.11n Security Rtr...
Jan 14, 2009 | HP Compaq Evo n610c Notebook
Sep 16, 2008 | Linksys Wireless-G Broadband Router
Jun 07, 2008 | Actiontec Computers & Internet
Dec 25, 2007 | Linksys A+G WRT55AG Wireless Router
168 people viewed this question
Usually answered in minutes!