Question about Denon AVR-485 Receiver

1 Answer

After turning ON the power/standby switch, the unit(receiver) display comes ON (green light) then after approx.4-5 seconds the display goes OFF and the unit defaults back to the standby mode (red light). I have no remote(RC-977).

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 52 Answers

Is the red light flashing at first?
The unit may be going into protect mode. Lets hope it has done the job and the receiver has protected itself from failure.
Protect mode can result from speaker wires touching each other or the Ampsafter turning ON the power/standby switch, the - 2_bing.gif metal case. Check that first.
It can also be caused by unstable ohm loads if too many speakers2_bing.gif are connected to any of the outputs especially zone 2.
If you can remove all speaker wires and turn the unit back on. If it stays on, turn the volume down on the main zone and zone 2 if connected. Then reconnect speaker wires.

Posted on Nov 24, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No power output or display.green standby light flashes.


Sounds like either a blown mainpower fuse or the thermal fuse for the power transformer. If the protect circuit was kicking in, the display would light up, but then turn off with a red blinking light. the green light with no display means the transformer is not getting power.

Dec 31, 2013 | Denon Avr-1610: 5.1 Ch A/V Home Theater...

1 Answer

Display POWER ON but SC25 not working.not reset


my regservo need to active plz help me for activation code

Dec 29, 2013 | Pioneer Elite SC-25 7.1-CH A/V Receiver

1 Answer

Runco flat panel tv displays solid green then blinking red light. What doe this mean?


How many times this standby/power light blinks at one time switch ON? Count it carefully. These blinks are fault indication, and known as blinking codes. From the number of blinks occur at one time switch ON; you can get an idea about the faulty circuit stage inside the TV. This will make repair easy. For more information, check the link http://electronicshelponline.blogspot.com/

Nov 14, 2013 | Runco Televison & Video

1 Answer

PDP-4340HD keeps turning off.


Continuous blinks of standby light indicates a fault in the IIC data bus. The main board is likely to be faulty. If you wish to know more Check this link.

Feb 03, 2013 | Pioneer PureVision PDP-4340HD 43 in....

1 Answer

NAD C521 on / off button light


"POWER ON: Press this Green button to switch on the power to the disc player from Standby mode. The LED will change from Amber to Green, and the EFL display will illuminate."

So besides the L.E.D. the unit has another visual indicator that it's turned ON, the display lights up. Is this worth pursuing a fix?

Mar 03, 2010 | NAD C521 CD Player

2 Answers

Denon AVR-1705 won't power up


when i turn it on it stays on for 3-4 seconds then shuts down

Jun 27, 2008 | Denon AVR-1705 Receiver

1 Answer

Home theater reciever


Check the internal fuses havn't burnt out. Remove the main cover. There are 4 glass fuses.

Jan 20, 2008 | JVC RX-ES1SL Receiver

1 Answer

Won't Turn On....Immediately Switches To Standby


Did you get your tv fixed? It may be the Sub power supply unit. If the main supply went out it would not light the display at all. Yes it is time for th repair shop. Good Luck.

Jan 25, 2007 | Sylvania 6842-PEM 42 in. EDTV-Ready Plasma...

Not finding what you are looking for?
Denon AVR-485 Receiver Logo

1,211 people viewed this question

Ask a Question

Usually answered in minutes!

Top Denon Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5011 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

The Knight
The Knight

Level 3 Expert

73591 Answers

Are you a Denon Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...