Question about Sony KP-61HS10 61" Rear Projection Television

2 Answers

Sony KP61HS10 Convergence issue

I have a Sony KP61HS10 that has a convergence issue. At first it was just when the unit was first turned on the issue was bad but as it warmed up everything aligned and looked great. It has steadily declined though and even leaving the TV on and auto adjusting the picture it now strains the eyes cause the convergence is off and makes it difficult to read the guide without minor discomfort.... the local service companies are wanting 79.95 to walk in the door plus $250 labor plus $100 parts to start...

Anyone know if it would just be 2 convergence IC's like I am reading and if so does anyone have a service manual for this unit?

Thanks in advance

Joe

Posted by on

  • 1 more comment 
  • Anonymous Jan 25, 2008

    sony projection tv kp-61hs20 how to repair convergence problem

  • bigboy47 Jan 29, 2008

    I have the same problem. The convergence when set is turned on is the worst. It improves as the day goes by, to where the colors are of about 1/8-1/4" I,too am from Texas, maybe we bought the same shipment.

  • Anonymous Mar 02, 2008

    I have the same problem with my sony kp61hs10 the picture inproves in 10min can you please post the solution thansk

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Http://www.schematicsforfree.com/archive/ for the schematics.

I alsp have this issue and have adjusted the convergence to get it correct when the unti warms up. For the first 10 minutes it is pretty far off. then slowly comes together. I am very interested in finding a solution, so please post one if you find it. we all seem to have tghe same issue.. maybe a cold solder join on the A or D board?

Posted on Feb 27, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

U may purchase service manuals here/
www.servicemanuals.net

Posted on Jan 10, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Red and Green colors are separated what would cause this?


It sounds like your color convergence is out. First try pressing your magic focus button. If the unit is still having convergence issues then chances are you need to replace the convergence ic's on the D broard and the 5 amp fuse links on the G board.

Aug 16, 2010 | Sony KP-57WS500 57" Rear Projection...

1 Answer

My display is arched on the top and bottom of display on my sony kp61hs10. Wanted to know a solution to fix this issue.


Convergence output ICs in your tv got defective and causing arched on top/bottom of screen.
Convergence output ICs will be replaced to fix tv problem. There is Convergence Repair Kit available along with photo instructions to fix tv problem and you can attempt to repair tv if you have little experience for that to understand those instructions. Or local tv repair shop will help you to fix the tv problem.

Jul 19, 2010 | Sony KP-61HS10 61" Rear Projection...

1 Answer

Manual convergence


with some sony tv's you manual convergence won't dispaly until your automatic one fails

Aug 22, 2009 | Televison & Video

1 Answer

Tv out of focus


You need to replace Both of the convergence ICs STK392-560s they are big black ICs. www.electronix.com for parts 1-800-223-3205

Jan 01, 2009 | Televison & Video

1 Answer

Sony kp61hs10 tv picture wont line up


THIS PROBLEM IS CALLED CONVERGENCE ...MOST OF THE PROBLEMS ARE CAUSE BY CONV. IC'S GOING BAD AND POSSIBLY A FUSE BLOWN-- U NEED A TCEH FOR THIS REPAIR..TUNICA

Oct 29, 2008 | Televison & Video

1 Answer

Sony KP61HS10 and timewarner digital cable box. Don't know which is the problem. Problem is a blue/white ghost on all channels. Tried unplug both units, tried flash focus. Shadow/ghost is now curved image...


I'm going to guess that these ghosts are of different colors too. This is most likely a convergence problem. Try resoldering the pins on the convergence ICs first. If that fails, replace them.
These ICs are large and black, attached to a heatsink. They will be marked STKxxx.
Keep us posted.
Dan

Apr 18, 2008 | Televison & Video

1 Answer

Sony KP-51HW40 Convergence issue


Can you adjust the convergence by the convergence menu without going through the service menu? The settings through the convergence menu should save automatically. Have you replaced the convergence ICs? If so the settings should save, if not the D board will need to be replaced or at the very least rebuilt. Let me know if you need further assistance with this issue.

Apr 10, 2008 | Sony KP-51HW40 51" Rear Projection...

1 Answer

Toshiba 43H70 Picture Problem


Convergence amp ic bad
http://home.earthlink.net/~oleg.filippov/ConvergenceFix.htm
http://cmpalmer.blogspot.com/2006/11/fixing-my-own-tv-part-ii.html
Sony Convergence
http://www.techlore.com/blog/entry/19694/Sony-Convergence-Repair-My-Sony-TV-has-a-distorted-picture-/
http://www.techlore.com/article/19631/Sony-Convergence-Procedure/

Jan 28, 2008 | Toshiba 43H70 43" Rear Projection...

1 Answer

Sony KP-53HS30 Convergence Issue


Are both 3.15 amp fuses good ?................................T.

Dec 24, 2007 | Sony KP-51WS510 51" Rear Projection...

1 Answer

Sony KP-53HS30 Convergence Issue


did you check all fuses get back to me

Oct 10, 2007 | Sony KP-53HS30 53" Rear Projection...

Not finding what you are looking for?
Sony KP-61HS10 61" Rear Projection Television Logo

Related Topics:

463 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75304 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1689 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...